MBD-X8DTI-LN4F-O - Motherboard Supermicro - Free user manual and instructions
Find the device manual for free MBD-X8DTI-LN4F-O Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server Motherboard |
| Brand | Supermicro |
| Model | MBD-X8DTI-LN4F-O |
| Form Factor | Extended ATX (12" x 10.5") |
| Weight | Approximately 1.5 kg (3.3 lbs) |
| Chipset | Intel 5500 + ICH10R |
| CPU Support | Dual Intel Xeon 5500/5600 series (LGA 1366) |
| Memory | 12 x DDR3 DIMM slots, up to 192GB, ECC Registered/Unbuffered |
| Storage Interfaces | 6 x SATA II (3 Gbps) via ICH10R; support RAID 0,1,5,10 |
| Network | 4 x Intel 82574L Gigabit Ethernet |
| Expansion Slots | 2 x PCI-E 2.0 x16, 2 x PCI-E 2.0 x8, 1 x PCI-E x4 (in x8 slot) |
| Rear I/O | PS/2 keyboard/mouse, 2 x USB 2.0, 1 x Serial, 1 x VGA (Matrox G200eW) |
| Integrated Graphics | Matrox G200eW with 16MB DDR2 |
| Remote Management | IPMI 2.0 via dedicated LAN |
| Power Connectors | 1 x 24-pin ATX, 2 x 8-pin EPS12V |
| Power Consumption | Typical ~150W (depending on CPU load) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Compliance | RoHS, CE, FCC |
| Warranty | 3 years limited |
| Included Accessories | I/O shield, SATA cables, manual, driver DVD |
| Maintenance Instructions | Use compressed air for dust removal; avoid liquids. |
| Safety Precautions | Disconnect power before installing; use ESD wrist strap. |
| Spare Parts Availability | Available through Supermicro partners; typical spare parts: fan, heatsink, CMOS battery. |
| Repairability | Modular design; CPU, memory, and expansion cards field-replaceable. |
Frequently Asked Questions - MBD-X8DTI-LN4F-O Supermicro
What processors are compatible with the MBD-X8DTI-LN4F-O?
This motherboard supports dual Intel Xeon 5500 and 5600 series processors in LGA 1366 socket. Ensure both CPUs are identical for optimal performance.
What type of memory does this motherboard use?
It uses DDR3 ECC Registered or Unbuffered DIMMs. Maximum capacity is 192 GB across 12 slots, supporting speeds of 800, 1066, and 1333 MHz.
Does the X8DTI-LN4F-O support hard drives larger than 2 TB?
Yes, but only if the operating system supports GPT partitioning. The motherboard itself does not impose a limit beyond the capacity of connected drives.
How can I update the BIOS on this motherboard?
Download the latest BIOS from Supermicro's website, place it on a USB flash drive, and use the built-in BIOS flash utility under the advanced menu or bootable DOS tools.
What RAID configurations are supported?
The Intel ICH10R controller supports RAID 0, 1, 5, and 10 for SATA drives. For hardware RAID, consider adding an optional SAS controller.
How do I access the IPMI remote management?
Connect to the dedicated IPMI LAN port. The default IP is 192.168.0.120. Use a web browser to access the IPMI web interface after logging in with admin:admin.
What is the maximum CPU TDP supported?
This motherboard supports CPUs with a maximum TDP of 130W. For higher TDP, ensure proper cooling and airflow in the chassis.
Can I use non-ECC RAM with this motherboard?
Yes, unbuffered non-ECC DDR3 memory is supported, but ECC memory is recommended for server environments to reduce data corruption.
Does the motherboard support PCIe 3.0?
No, the X8DTI uses the Intel 5500 chipset which only supports PCIe 2.0. PCIe 3.0 cards will work but at reduced speeds.
How do I clear the CMOS?
Power off the system, unplug it, remove the CMOS battery for 30 seconds, or use the clear CMOS jumper (JBT1) located near the battery.
User questions about MBD-X8DTI-LN4F-O Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual MBD-X8DTI-LN4F-O - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBD-X8DTI-LN4F-O by Supermicro.