DrivePro 230Q - Dash cam TRANSCEND - Free user manual and instructions
Find the device manual for free DrivePro 230Q TRANSCEND in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dash Cam |
| Brand | Transcend |
| Model | DrivePro 230Q |
| Dimensions | Approximately 6.5 x 5.5 x 4 cm |
| Weight | Approximately 62 g |
| Power Supply | 5V DC via USB car charger |
| Recording Resolution | Full HD 1080p at 30 fps |
| Lens Angle | 140° wide angle |
| Display | 2.4-inch LCD |
| GPS | Built-in GPS receiver |
| G-Sensor | Built-in 3-axis accelerometer |
| Loop Recording | Supported |
| Parking Mode | Supported (requires hardwire kit) |
| Memory Card Support | microSD up to 256 GB (Class 10) |
| Night Vision | Low-light enhancement |
| Maintenance | Clean lens with soft cloth; format card regularly |
| Safety Features | Emergency recording lock, lane departure warning |
| Spare Parts & Repairability | Suction mount, car charger, spare cables available; limited repair options |
| General Information | User manual available in multiple languages; warranty 2 years |
Frequently Asked Questions - DrivePro 230Q TRANSCEND
How do I install the DrivePro 230Q dash cam?
Attach the suction mount to the windshield, connect the car charger to the 12V socket, and route the cable along the headliner. Insert a microSD card (Class 10 or higher, up to 256 GB) into the slot.
How do I format the memory card?
Go to Settings on the device and select Format. Alternatively, format the card on a computer using FAT32 or exFAT. Always format the card in the dash cam for optimal compatibility.
How can I view recorded videos?
Remove the microSD card and insert it into a computer, or use the Transcend DrivePro App via Wi-Fi (if supported). On the device, press the Playback button to review files on the LCD screen.
Does the DrivePro 230Q have a parking mode?
Yes, it supports parking mode with motion detection. This requires the hardwire kit (sold separately) to maintain power when the engine is off.
How do I reset the device?
Insert a paperclip into the Reset hole on the side of the dash cam and hold for 5 seconds. This will restore factory settings without deleting videos.
What does the G-Sensor do?
The G-Sensor detects sudden impacts or sharp turns and automatically locks the current recording, preventing it from being overwritten by loop recording.
Is GPS functionality included?
Yes, the DrivePro 230Q has a built-in GPS receiver that records your speed, location, and route. You can view this data using the PC utility software.
How do I enable loop recording?
Loop recording is enabled by default. You can set the clip length (1, 3, or 5 minutes) in the Settings menu. Older clips are automatically overwritten when the card is full.
What type of microSD card should I use?
Use a high endurance microSD card rated Class 10 or higher, with capacity up to 256 GB. Regular cards may fail due to constant writing.
The dash cam is not turning on. What should I do?
Check the cigarette lighter adapter and cable connections. Try a different USB cable or power source. If using a hardwire kit, verify the fuse. Press the Reset button if needed.
User questions about DrivePro 230Q TRANSCEND
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dash cam in PDF format for free! Find your manual DrivePro 230Q - TRANSCEND and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DrivePro 230Q by TRANSCEND.