G200 - Pregnant JBL - Free user manual and instructions
Find the device manual for free G200 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | JBL |
| Model | G200 |
| Dimensions (W x H x D) | Approx. 200 x 70 x 70 mm |
| Weight | Approx. 0.5 kg |
| Power Supply | Rechargeable Lithium-ion battery (USB-C charging) |
| Battery Life | Up to 10 hours (varies by usage) |
| Wireless Connectivity | Bluetooth 5.0 |
| Supported Audio Codecs | SBC, AAC |
| Speaker Driver | 40 mm full-range |
| Frequency Response | 80 Hz - 20 kHz |
| Output Power | 20 W RMS |
| Water Resistance | IPX7 (submersible up to 1m for 30 min) |
| Hands-Free Calling | Yes (built-in microphone) |
| Multi-Device Connection | Up to 2 devices simultaneously |
| Controls | Buttons for power, volume, play/pause, Bluetooth, and voice assistant |
| Cleaning | Wipe with a soft, dry cloth. Do not use aggressive chemicals. |
| Safety Notes | Do not expose to extreme temperatures. Do not disassemble. Use only approved chargers. |
| Spare Parts & Repairability | Contact JBL support for replacements. Not user-serviceable. Recycle properly. |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - G200 JBL
How do I pair my JBL G200 with a Bluetooth device?
Ensure the speaker is powered on and in pairing mode (indicated by flashing Bluetooth LED). On your device, go to Bluetooth settings, select 'JBL G200' from the list. If prompted, enter PIN '0000'.
Can I connect two JBL G200 speakers together?
Yes, this model supports JBL Connect+ (if available) or a similar pairing feature. Press the Connect button on both speakers to pair them for stereo or party mode.
How do I charge the JBL G200?
Use the included USB-C cable and connect to a 5V/2A charger. The LED turns solid when fully charged. Charging time is approximately 3 hours.
What is the battery life?
The battery lasts up to 10 hours at moderate volume. Higher volume or bass-heavy content may reduce playtime.
Is the JBL G200 waterproof?
Yes, it has an IPX7 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes. However, do not charge while wet.
How do I reset the JBL G200?
Press and hold the Volume Up and Bluetooth buttons simultaneously for 10 seconds until the LED flashes rapidly. This clears paired devices and restores factory settings.
Can I use the speaker while charging?
Yes, you can play music while the speaker is plugged in. It will charge and play simultaneously.
What do the LED indicators mean?
Flashing blue: pairing mode. Solid blue: connected. Flashing red: low battery (below 15%). Solid red: charging. Off: fully charged or powered off.
Why is there no sound from my speaker?
Check if the speaker is paired and connected to your device. Ensure volume is turned up on both the speaker and your device. Also check if the speaker is muted (press the play/pause button).
How do I clean the JBL G200?
Wipe the exterior with a soft, damp cloth. Avoid getting water inside the charging port. Do not use abrasive cleaners or solvents.
User questions about G200 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual G200 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G200 by JBL.