MultiCooler - Refroidisseur BLUETTI - Free user manual and instructions
Find the device manual for free MultiCooler BLUETTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Portable Electric Cooler |
| Brand | Bluetti |
| Model | MultiCooler |
| Dimensions (W x D x H) | Approx. 20 x 15 x 18 inches (50 x 38 x 45 cm) |
| Weight | Approx. 35 lbs (16 kg) |
| Power input | 12V DC / 120V AC (via adapter) |
| Power consumption | 45-60 W (typical) |
| Cooling capacity | Down to -4°F (-20°C) ambient dependent |
| Temperature range | -4°F to 50°F (-20°C to 10°C) |
| Interior volume | Approx. 1.2 cu ft (34 liters) |
| Insulation | High-density foam |
| Control type | Digital thermostat with LCD display |
| Ports | USB-A and USB-C for charging devices |
| Battery compatibility | Can be powered by Bluetti power stations |
| Wheels | Integrated telescopic handle and wheels for portability |
| Materials | Durable ABS plastic exterior, stainless steel hinges |
| Cleaning instructions | Wipe with damp cloth; mild soap if needed. Do not immerse. |
| Safety features | Overheat protection, low voltage cutoff, reverse polarity protection |
| Use environment | Indoor/outdoor, IPX4 splash resistant |
| Included accessories | AC adapter, DC car cord, user manual |
| Repairability | Modular design; replaceable fan, compressor, and control board |
| Warranty | 2 years limited |
Frequently Asked Questions - MultiCooler BLUETTI
How do I set the temperature on the MultiCooler?
Use the digital control panel to adjust the temperature. Press the Set button, then use the +/- buttons to select your desired temperature. The range is from -4°F to 50°F.
Can I run the MultiCooler on battery power?
Yes, the MultiCooler can be powered by a 12V DC source, such as a car or a Bluetti power station. It draws about 45-60 watts, making it efficient for off-grid use.
How long does it take to cool down items?
Cool-down time depends on the ambient temperature and load. Typically, it can reach 32°F (0°C) in about 20-30 minutes when pre-cooled. For best results, pre-chill items.
What is the maximum weight the handle and wheels can support?
The telescopic handle and wheels are designed for up to 50 lbs (23 kg). Do not exceed this limit to avoid damage.
Is the MultiCooler waterproof?
It has an IPX4 rating, meaning it is splash-resistant from any direction. Do not submerge it in water.
How do I clean the interior?
Unplug the cooler and wipe with a damp cloth and mild detergent. Rinse with a clean damp cloth and dry thoroughly. Avoid abrasive cleaners.
Can I plug the MultiCooler into a standard wall outlet?
Yes, use the included AC adapter to connect to a 120V household outlet. The adapter converts to 12V DC for the cooler.
What does the 'E' error code mean?
An 'E' error code indicates a temperature sensor fault. Unplug the unit for 5 minutes, then restart. If the error persists, contact support.
Is the MultiCooler repairable?
Yes, it has a modular design with replaceable components like the compressor, fan, and control board. Refer to the manual for disassembly instructions or contact Bluetti.
What is the recommended storage temperature when not in use?
Store the MultiCooler in a cool, dry place between 32°F and 104°F (0°C to 40°C). Leave the lid slightly open to prevent mold.
User questions about MultiCooler BLUETTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refroidisseur in PDF format for free! Find your manual MultiCooler - BLUETTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MultiCooler by BLUETTI.