EM 888 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free EM 888 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Dimensions (H x W x D) | 150 x 70 x 30 mm |
| Weight | 200 g |
| Power Supply | 9V battery (PP3 type) |
| Display | LCD, 4000 counts |
| DC Voltage Range | 400 mV to 600 V |
| AC Voltage Range | 4 V to 600 V |
| DC Current Range | 400 µA to 10 A |
| Resistance Range | 400 Ω to 40 MΩ |
| Capacitance Measurement | 4 nF to 100 µF |
| Frequency Measurement | Up to 10 MHz |
| Diode Test | Yes |
| Continuity Test | Yes |
| Data Hold | Yes |
| Auto Range | Yes |
| Safety Rating | CAT II, 600 V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Care and Cleaning | Wipe with a dry cloth; avoid solvents |
| Spare Parts and Repairability | Contact PCE Instruments for replacement probes and battery |
Frequently Asked Questions - EM 888 PCE Instruments
How do I measure voltage with the EM 888?
Set the rotary switch to the appropriate DCV or ACV range. Connect the black probe to COM and red probe to V/Ω. Touch the probes to the circuit and read the display.
What is the maximum current I can measure?
The EM 888 can measure up to 10 A AC/DC for short durations (10 seconds max). For higher currents, use a clamp accessory.
How do I test continuity?
Turn the dial to the continuity/diode test position (usually marked with a diode symbol). Connect probes to the circuit; a beep indicates continuity (< 50 Ω).
Why does the display show 'OL'?
'OL' means Overload. The measured value exceeds the selected range. Switch to a higher range or use autoranging.
How to replace the battery?
Turn off the meter, remove the battery compartment screw, and replace the 9V battery with a new one. Ensure correct polarity.
Can I measure AC and DC voltage?
Yes, the EM 888 measures both AC and DC voltage. Select the appropriate function using the rotary switch.
What safety precautions should I take?
Always use the meter within its rated category (CAT II 600V). Inspect probes for damage before use. Do not measure voltages above 600V.
How do I measure resistance?
Turn the dial to the Ω position. Ensure the circuit is de-energized. Connect the probes across the resistor and read the value.
What does the data hold function do?
Press the Data Hold button to freeze the current reading on the display. Press again to resume normal measurement.
Is the EM 888 suitable for automotive use?
Yes, it can measure DC voltage and resistance in automotive circuits. However, avoid measuring high-current circuits directly without a clamp.
User questions about EM 888 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual EM 888 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EM 888 by PCE Instruments.