XT-8315E - Cash register Posiflex - Free user manual and instructions
Find the device manual for free XT-8315E Posiflex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Touch Screen POS Terminal / Cash Register |
| Display | 15-inch color TFT LCD with touch screen |
| Processor | Intel Celeron J1900 2.0 GHz |
| Memory | 4GB DDR3L RAM |
| Storage | 64GB SSD |
| Cash Drawer Interface | RJ-11 connector (24V) |
| Printer | Integrated thermal receipt printer (80mm) |
| Connectivity | USB 2.0 x 4, RS-232 x 2, Ethernet, WiFi optional |
| Power Supply | 100-240V AC, 50/60Hz, external adapter |
| Dimensions (W x D x H) | 362 x 298 x 308 mm |
| Weight | 5.2 kg |
| Operating System | Windows 10 IoT / Linux compatible |
| Maintenance | Clean with dry soft cloth; avoid liquids |
| Safety | Overload protection, CE/FCC certified |
| Spare Parts | Power adapter, touch screen, printer mechanism |
| Warranty | 1 year limited |
| Included Accessories | Power cord, user manual, software CD |
Frequently Asked Questions - XT-8315E Posiflex
How do I set up the Posiflex XT-8315E for the first time?
Unpack the terminal, connect the power adapter, attach the cash drawer and printer cables, then turn on the power. Follow the on-screen setup wizard to configure the system.
Can I connect a barcode scanner to the XT-8315E?
Yes, the terminal has USB and RS-232 ports for connecting a barcode scanner. Plug it into any available USB port and install the necessary drivers if required.
How do I replace the thermal paper in the integrated printer?
Open the printer cover by pressing the release button. Remove the empty roll, insert a new 80mm thermal paper roll with the paper feeding from the bottom, close the cover until it clicks.
What should I do if the touch screen is not responding?
First, check if the screen is dirty – clean with a dry cloth. If still unresponsive, restart the system. If the issue persists, recalibrate the touch screen via the operating system settings.
Can I use the XT-8315E with a third-party POS software?
Yes, the terminal runs on Windows 10 IoT or Linux, so it is compatible with most POS software. Install your preferred software and configure the peripheral devices as needed.
How do I connect the cash drawer?
Connect the cash drawer cable to the RJ-11 port labeled 'Cash Drawer' on the back of the terminal. Ensure the drawer is compatible with 24V signal.
What is the power consumption of the XT-8315E?
The terminal consumes approximately 60W under normal operation. The external power adapter supports 100-240V AC input.
How do I clean the device?
Turn off the device and unplug it. Use a dry, soft microfiber cloth to wipe the screen and exterior. Do not use liquid cleaners or abrasive materials.
Can I upgrade the memory or storage?
Yes, the XT-8315E has accessible slots for RAM and a 2.5-inch SATA SSD. Refer to the user manual for the location and compatible specifications.
What should I do if the printer is not printing?
Check if the paper is loaded correctly and the cover is closed. Verify the printer is selected as the default printer in your POS software. If still not working, run the printer self-test by holding the feed button while powering on.
User questions about XT-8315E Posiflex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cash register in PDF format for free! Find your manual XT-8315E - Posiflex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XT-8315E by Posiflex.