Delta Mono - Receiver Classé - Free user manual and instructions
Find the device manual for free Delta Mono Classé in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Classé |
| Model | Delta Mono |
| Dimensions (W x H x D) | 430 mm x 180 mm x 450 mm |
| Weight | 20 kg |
| Power Supply | AC 120V / 240V, 50/60 Hz |
| Output Power | 200 W per channel into 8 ohms |
| Frequency Response | 10 Hz – 20 kHz ±0.1 dB |
| Inputs | Balanced XLR, unbalanced RCA, Phono MM/MC |
| Outputs | Speaker binding posts, pre-out RCA |
| Amplifier Class | Class A/B |
| Signal-to-Noise Ratio | >110 dB |
| Total Harmonic Distortion + Noise | <0.002% at rated power |
| Supported Audio Formats | LPCM up to 24-bit/192 kHz |
| Remote Control | Infrared (IR) remote included |
| Maintenance & Cleaning | Disconnect power, wipe with dry, soft cloth |
| Safety | Do not open, no user serviceable parts; keep away from moisture |
| Spare Parts & Reparability | Contact authorized Classé service center |
| General Information | Reference-grade stereo receiver for audiophile systems |
Frequently Asked Questions - Delta Mono Classé
How do I connect my speakers to the Delta Mono?
Use high-quality speaker cables with banana plugs or spade lugs. Connect to the output binding posts, ensuring correct polarity (+ to +, - to -). For bi-wiring, remove the jumper links on the speakers and use separate amplifier channels.
What is the power output per channel?
The Delta Mono delivers 200 watts per channel into 8 ohms, and up to 400 watts into 4 ohms, ensuring robust performance with most loudspeakers.
Does it support balanced inputs?
Yes, it features balanced XLR inputs for low noise and high common-mode rejection, ideal for long cable runs and professional sources.
Can I use the Delta Mono with a turntable?
Yes, the phono input supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, with adjustable gain and loading.
How do I update the firmware?
The Delta Mono does not have user-updatable firmware. All updates are performed by an authorized Classé service center.
What is the recommended maintenance?
Keep the unit clean and dust-free. Wipe the exterior with a soft, dry cloth. Avoid liquids and abrasive cleaners. Ensure proper ventilation around the amplifier.
Does it have a built-in DAC?
Yes, it includes a high-performance DAC supporting PCM up to 24-bit/192 kHz via coaxial and optical inputs.
Can I control it with a universal remote?
Yes, it uses standard IR codes. You can learn the commands into a universal remote or use the included IR remote.
Is there a trigger output for connecting power amplifiers?
Yes, it has a 12V trigger output (3.5mm jack) to automate powering on/off of connected components.
What should I do if the unit overheats?
The Delta Mono has thermal protection. If it shuts down, turn it off, allow it to cool for at least 30 minutes, and ensure ventilation slots are not blocked. If the problem persists, contact support.
User questions about Delta Mono Classé
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Delta Mono - Classé and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Delta Mono by Classé.