ENCORE LP32IP - Uncategorized American DJ - Free user manual and instructions
Find the device manual for free ENCORE LP32IP American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can Light Fixture |
| Model | ENCORE LP32IP |
| Light Source | 32 x 1W LEDs (RGBW) |
| Beam Angle | 25° |
| Power Consumption | 35W |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (LxWxH) | 8.5 x 8.5 x 11.2 inches (216 x 216 x 285 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| DMX Channels | 4, 7, or 11 selectable |
| Control Modes | DMX512, Master/Slave, Sound Active, Standalone |
| IP Rating | IP65 (weather resistant) |
| Housing Material | Aluminum and Polycarbonate |
| Cooling | Passive convection |
| Fuse | 1A, 250V (replaceable) |
| Accessories Included | Mounting bracket, power cord, user manual |
| Cleaning | Use dry cloth; avoid solvents |
| Safety | Do not stare at beam; maintain ventilation |
| Spare Parts | LED boards, power supply, control PCB available |
| Repairability | Modular design; user replaceable fuse and LEDs |
Frequently Asked Questions - ENCORE LP32IP American DJ
How do I set the DMX address on the ENCORE LP32IP?
Press the MENU button until the display shows DMX Address. Use the UP and DOWN buttons to select the desired address, then press ENTER to confirm.
Can I use this fixture outdoors?
Yes, the ENCORE LP32IP has an IP65 rating, making it weather resistant and suitable for outdoor use.
What are the available control modes?
The fixture supports DMX512, Master/Slave, Sound Active, and Standalone modes. You can switch modes via the control panel.
How do I replace the fuse?
Unplug the unit. Locate the fuse holder near the power input. Use a small screwdriver to open it, replace the fuse with a 1A 250V fuse of the same type, and close the holder.
What is the recommended cleaning method?
Disconnect power and allow to cool. Use a soft dry cloth to gently wipe the lens and housing. Avoid using abrasive materials or solvents.
How many DMX channels does it use?
The ENCORE LP32IP can be set to 4, 7, or 11 channels depending on the desired control level. Refer to the manual for channel assignments.
Can I daisy-chain multiple units?
Yes, in Master/Slave mode, connect a DMX cable from the Master's DMX out to the Slave's DMX in. Up to 32 units can be linked.
What does the display show when sound active mode is enabled?
The display will show Soun and the fixture will respond to bass frequencies. You can adjust sensitivity via the control panel.
Is the fixture compatible with third-party DMX controllers?
Yes, it uses standard DMX512 protocol, so it works with any DMX controller that supports the selected channel mode.
How do I reset the fixture to factory defaults?
Press and hold the MENU button for 5 seconds. The display will show DEFA. Press ENTER to confirm and reset all settings.
User questions about ENCORE LP32IP American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ENCORE LP32IP - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ENCORE LP32IP by American DJ.