700 - Pregnant MISSION - Free user manual and instructions
Find the device manual for free 700 MISSION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | Mission |
| Model | 700 |
| Category | Passive Speaker |
| Speaker Configuration | 2-Way |
| Woofer Size | 6.5 inches (165 mm) |
| Tweeter Size | 1 inch (25 mm) soft dome |
| Power Handling (RMS) | 100 Watts |
| Power Handling (Peak) | 150 Watts |
| Impedance | 8 Ohms |
| Frequency Response | 45 Hz - 22 kHz |
| Sensitivity | 87 dB (2.83V/1m) |
| Recommended Amplifier Power | 25 - 120 Watts |
| Crossover Frequency | 2.5 kHz |
| Enclosure Type | Bass reflex with rear port |
| Cabinet Material | MDF with vinyl veneer |
| Dimensions (W x H x D) | 8.3 x 14.2 x 10.6 inches (210 x 360 x 270 mm) |
| Weight (per speaker) | 12.5 lbs (5.7 kg) |
| Binding Posts | Gold-plated, bi-wire capable |
| Finish Options | Black ash, Cherry, Walnut |
| Magnetic Grille | Yes, removable |
| Warranty | 5 years (limited) |
| Recommended Placement | Bookshelf or stand, 6-12 inches from wall |
Frequently Asked Questions - 700 MISSION
How do I connect the Mission 700 speakers to my amplifier?
Use high-quality speaker wire with banana plugs or bare wire. Connect the positive (red) terminal of the speaker to the positive output of your amplifier, and negative (black) to negative. Ensure the amplifier is off when making connections.
What is the recommended amplifier power for the Mission 700?
The recommended amplifier power is between 25 and 120 Watts RMS per channel at 8 Ohms. Using an amplifier within this range ensures optimal performance without damaging the speakers.
Can I bi-wire or bi-amp the Mission 700?
Yes, the Mission 700 features gold-plated binding posts that allow bi-wiring or bi-amping. Remove the jumper plates between the terminals and use two separate cables for the low and high frequency sections. Ensure your amplifier supports this configuration.
What is the best placement for the Mission 700 bookshelf speakers?
Place the speakers at ear level when seated, ideally on sturdy stands or shelves. Keep them 6-12 inches away from the rear wall to avoid bass boom. Angle them slightly towards the listening position for optimal stereo imaging.
How should I clean and maintain the Mission 700 speakers?
Use a soft, dry microfiber cloth to gently dust the cabinet. For grilles, vacuum with a soft brush attachment. Avoid using any liquid cleaners or abrasives, as they may damage the finish. Check speaker connections periodically.
What type of speaker wire should I use with the Mission 700?
Use 16-14 AWG stranded copper speaker wire for runs up to 50 feet. For longer runs, use 12 AWG. Ensure the wire is properly stripped and securely connected to avoid signal loss.
Can I use the Mission 700 as a center channel or surround speaker?
Yes, the Mission 700 can be used as a center or surround speaker in a home theater setup. For center channel, place it horizontally on a shelf or stand. Ensure all speakers in the system have matching tonal characteristics.
What is the frequency response of the Mission 700?
The frequency response is 45 Hz to 22 kHz. This means it can reproduce deep bass notes and clear high frequencies, suitable for music and movie playback.
How do I break in the Mission 700 speakers?
New speakers benefit from a break-in period of 20-50 hours at moderate volume. Play a variety of music with dynamic range. This allows the suspension components to loosen and achieve optimal sound quality.
What should I do if the sound from my Mission 700 is distorted?
Check the amplifier volume: distortion often occurs when the amplifier is clipping. Ensure the speaker wires are securely connected and not touching each other. Verify that the speaker impedance matches your amplifier's rating. If the problem persists, try a different source or amplifier.
User questions about 700 MISSION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual 700 - MISSION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 700 by MISSION.