Nighthawk S8000 GS808E - Switch NETGEAR - Free user manual and instructions
Find the device manual for free Nighthawk S8000 GS808E NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Netgear |
| Model | Nighthawk S8000 GS808E |
| Ports | 8 x Gigabit Ethernet |
| Speed | 10/100/1000 Mbps |
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K entries |
| VLAN Support | Yes, up to 64 VLANs |
| QoS | Yes, with 4 hardware queues |
| Management | Web-based, no CLI |
| Power Supply | External AC adapter (12V, 1A) |
| Power Consumption | 6W (max) |
| Dimensions (WxDxH) | 158 x 101 x 29 mm |
| Weight | 0.35 kg |
| Mounting | Desktop, optional wall-mount |
| Cooling | Fanless, silent |
| LED Indicators | Power, per port link/activity |
| Warranty | Limited lifetime |
| Package Contents | Switch, power adapter, user manual, rubber feet |
| Operating Temperature | 0°C to 40°C |
| Safety Certifications | CE, FCC, RoHS |
Frequently Asked Questions - Nighthawk S8000 GS808E NETGEAR
How do I reset the Netgear Nighthawk S8000 GS808E to factory defaults?
Press and hold the Factory Reset button on the front panel for about 10 seconds using a paperclip until the LEDs flash. Release and the switch will reboot with default settings.
Does the GS808E support VLANs?
Yes, it supports up to 64 VLANs with 802.1Q tagging. You can configure them via the web interface under the VLAN menu.
What is the default IP address of the switch?
The default IP is 192.168.0.239 with subnet mask 255.255.255.0. The default username is 'admin' and password is 'password'.
How can I enable QoS on the switch?
Log into the web interface, go to QoS settings. You can set priority based on 802.1p or DSCP to optimize traffic for voice/video.
Is the Nighthawk S8000 GS808E fanless?
Yes, it is completely fanless and silent, making it ideal for home or office use.
Can I mount this switch on a wall?
Yes, the switch has two mounting slots on the bottom for wall-mounting. Use appropriate screws (not included).
What power adapter does the GS808E require?
It uses an external power adapter with 12V DC, 1A output. The barrel connector size is 2.5mm inner / 5.5mm outer.
Why are some ports not lighting up?
Check that the Ethernet cable is properly connected and the device on the other end is powered on. Also verify that the cable is not damaged. If the port is disabled, enable it in the web interface.
How do I access the web management interface?
Connect a computer to any port. Set your computer's IP to 192.168.0.x (e.g., 192.168.0.10). Open a browser and go to http://192.168.0.239. Login with default credentials.
Does this switch support PoE (Power over Ethernet)?
No, the GS808E does not support PoE. It only passes data. Use a PoE injector or a PoE switch for powered devices.
User questions about Nighthawk S8000 GS808E NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual Nighthawk S8000 GS808E - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nighthawk S8000 GS808E by NETGEAR.