T6 - Regulator Gamesir - Free user manual and instructions

Product Type	Bluetooth Game Controller
Brand	GameSir
Model	T6
Compatibility	iOS 11.0 or higher
Connectivity	Bluetooth
Battery Charging	Micro-USB, 2–2.5 hours
Automatic Power-Off	After 5 minutes idle (connected) or 2 minutes (disconnected)
Low Battery Indication	Rapid red flashing LED
Joystick Calibration	Yes (press A+LB for 3 seconds)
Button Customization	Via Geekgamer app (Basic, MOBA, Macro)
Dimensions (approx.)	140 x 90 x 50 mm
Weight (approx.)	150 g
Package Contents	Controller, Micro-USB cable, User manual
Warranty	12-month replacement
Customer Support	Email: [e-mail], Hotline: [phone]
Cleaning	Soft dry cloth; avoid chemicals
Safety	Keep away from children under 3; avoid high temperatures, direct sunlight, disassembly
Charging Indicator	Red flashing (charging), steady red (full)
Auto Sleep	Yes, press A/B/LT/LB to wake

Frequently Asked Questions - T6 Gamesir

How do I connect the GameSir T6 to my iPhone?

Press and hold button B and the power button simultaneously until the LED flashes blue. Then, on your iPhone, go to Bluetooth settings and pair with 'GameSir-T6'. The LED will turn solid blue when connected.

What app do I need for button mapping?

You need the Geekgamer app, available on the App Store. Scan the QR code in the manual to download it.

How do I charge the controller?

Use the included Micro-USB cable to connect the controller to a USB power source. Charging time is about 2 to 2.5 hours. The LED flashes red while charging and turns steady red when fully charged.

The controller won't pair. What should I do?

Try forced clear pairing: while the controller is on, press and hold A + B + LT for 3 seconds until the blue light flashes quickly. Then turn off the controller, press the mode button (B + power) to enter pairing mode again, and reconnect.

How do I calibrate the joystick?

In the power-on state, press and hold A + LB for 3 seconds until the LED turns purple. Rotate the joystick to the outermost edge 3-5 times, then release. Wait 1-2 seconds; the purple light will flash slowly. Press A to exit calibration.

Does the controller automatically turn off?

Yes. If connected but idle for 5 minutes, it will power off automatically. If not connected within 2 minutes after turning on, it will also power off. Low battery will also cause auto power-off.

How do I wake the controller from sleep?

Press any of the A, B, LT, or LB buttons to wake it from automatic sleep.

Can I use the controller with Android devices?

The T6 is designed for iOS 11.0 or higher. It does not support Android devices.

What is the warranty on the GameSir T6?

GameSir offers a 12-month replacement warranty from the date of receipt. Contact customer service at [e-mail] for support.

How should I clean the controller?

Use a soft, dry cloth to clean the surface. Do not use chemicals like gasoline or thinner. Avoid getting moisture into the ports.

USER MANUAL T6 Gamesir

GameSir • Gaming is Winning.™

© 2019 GameSir Inc. All rights reserved. Product may vary slightly from those pictures.

GameSir®

GameSir T6

Bluetooth Controller

User Manual ▶

POWER UP YOUR GAMESIR DEVICE

https://gamesir.hk/

We hope this manual answering any questions you may have had. If you have any further questions, please contact us:

GameSir Facebook: https://www.facebook.com/myGamesir

Twitter: https://twitter.com/rnygamesir

Customer Service: [e-mail]

PACKAGE CONTENTS

GameSir T6 Bluetooth Controller

Micro-USB charging cable

User Manual

SYSTEM REQUIREMENT

iOS 11.0 (or higher)

REGISTRATION

Register your GameSir ID online at https://gamesir.hk/ to get real-time information on your product's warranty status and a series of exclusive benefits from GameSir.

YOUR BENEFITS

* 12-month replacement of the same model from the date you received it.

* Contact us for free online technical support

Website: https://gamesir.hk

E-mail: [e-mail]

Hotline: [phone] (USA & Canada)

Service Hours: Sat.-Sun. 9:00 AM-6:00 PM PST

Mon.-Wed. 6:00 AM-6:00 PM PST

Thur.-Fri. 6:00 AM-3:00 PM PST

DEVICE LAYOUT

A Joystick A Button B Button

©

D LED Indicator Light E LT Button

F LB Button

G Power Button H Micro-USB

Micro-USB charging cable

CONNECT GAMESIR T6 TO THE iPhone

Step 1

Scan the QRB below, then download and install Geekgamer from App Store.

Step 2

Connect GameSir T6 to the iPhone via Bluetooth

Press and hold the button B of the controller and switch it on at the same time, the indicator light will flash in blue; turn on Bluetooth in the iPhone, then search and pair with GameSir-T6. If the connection indicator light stays blue, the pairing is completed.

Step 3

Add and edit game settings

a. Open Geekgamer, select , then select the corresponding game configuration, add and enter.

b. Add the background image of button mapping, then adjust the button mapping in the background.

c. Press and hold the blank area to add a virtual button. After the addition is successful, a circular icon with <?> pops up, then you can drag it and adjust its position. Press the button of the controller that needs to trigger the virtual button, then the <?> will become the corresponding button. After the setting is completed, save and close. You can start the game now.

d. Double click the virtual button to enter the , you can adjust the Basic mode, MOBA custom and Macro define.

FORCED CLEAR PAIRING

a. Forced clear the combination button: in the switch-on state, press and hold button A + B + LT for 3 seconds at the same time, the blue light flashes quickly.
b. Enter the forced pairing mode: forcibly disconnect the currently connected device, close the gamepad, then press the corresponding mode combination button to power on, wait for other devices to connect.

JOYSTICK CORRECTION

In the power-on state, press button A+LB for 3 seconds at the same time to enter the joystick correction mode. Then the indicator light stays purple. Rotate the joystick to the outermost edge for 3-5 turns and then release it, waiting for 1-2 seconds. If the correction is successful, the purple light flashes slowly at this time, then press button A to exit the correction mode. The indicator light returns to the same state as before the joystick is corrected.

CHARGING

When charging in the power-on state, the indicator light flashes in red + current status light.

When the battery is full, the indicator light stays red + current status light. When charging in the power-off state, the indicator light flashes in red, and when the battery is full, the indicator stays red.

When the power is below the battery low voltage alarm, the indicator light flashes in red quickly.

Charging time : 2 - 2.5 Hours.

AUTOMATIC POWER-OFF

The controller is in the connected state, and if without any operation over 5 minutes it will power off automatically.

The controller is not connected over 2 minutes when it is power-on, and it will automatically power off.

When the power is below the battery low voltage alarm, the controller will automatically power off.

AUTOMATIC SLEEP

The controller is in the connected state, if there is no operation for over 5 minutes, it will automatically sleep. In the automatic sleep, press any button of A, B, LT, LB to wake up.

简体中文

包装内容

盖世小鸡T6手游单手手柄

Micro-USB 充电数据线

使用说明书

合格证

系统要求

苹果 (iOS11以上)

设备布局

摇杆

LED指示灯

开关键

A按键

LT按键

Micro-USB接口

B按键

LB按键

数据线

连接方法

NOTICE Please read this Precautions carefully.

- CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.

• DO NOT use the product near fire.

- DO NOT expose to direct sunlight or high temperatures.

- DO NOT leave the product in a humid or dusty environment.

- DO NOT impact the product or cause it to fall due to strong impact.

- DO NOT touch USB port directly or it might cause malfunctions.

• DO NOT strongly bend or pull cable parts.

- Use a soft, dry cloth while cleaning.

• DO NOT use chemicals such as gasoline or thinner.

- DO NOT disassemble, repair or modify.

- DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.

- DO NOT look directly at the optical light. It might damage your eyes.

- If you have any quality concerns or suggestions, please contact GameSir or your local distributor.

注意事项