7P HEX IP - Uncategorized American DJ - Free user manual and instructions
Find the device manual for free 7P HEX IP American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Model | 7P HEX IP |
| Light Source | 7 x 12W RGBWA+UV LEDs |
| Beam Angle | 25° |
| IP Rating | IP65 (weather resistant) |
| DMX Channels | 7/11/14 channel modes |
| Control | DMX512, Master/Slave, Sound Active, Standalone |
| Display | 4-button LED display |
| Power Consumption | 120W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 11.2 x 9.8 x 10.2 in (284 x 249 x 259 mm) |
| Weight | 6.8 lbs (3.1 kg) |
| Housing Material | Aluminum die-cast |
| Cooling | Passive convection |
| Mounting Options | Floor standing, hanging via omega bracket |
| Operating Temperature | -10°C to 45°C |
| Included Accessories | Power cable, mounting bracket, user manual |
| Maintenance | Clean lens surface with soft cloth; keep vents unobstructed |
| Safety Features | Overheat protection, safety cable loop |
| Spare Parts | LED modules, power supply, display board available |
| Repairability | Modular design; replaceable components |
Frequently Asked Questions - 7P HEX IP American DJ
How do I set DMX address on the 7P HEX IP?
Press the Menu button to enter the menu, navigate to DMX Address using Up/Down, press Enter, set the address with Up/Down, and press Enter again to confirm.
What is the IP rating and can I use it outdoors?
The IP65 rating means it is dust-tight and protected against low-pressure water jets. It can be used outdoors but not submerged.
How do I switch between sound active and DMX mode?
In the Menu, select Operating Mode and choose between DMX, Sound Active, Master/Slave, or Standalone using Up/Down and Enter.
Can I use the 7P HEX IP without a DMX controller?
Yes, it has sound active and standalone modes. In sound active, it reacts to music via built-in microphone. Standalone runs built-in color macros.
How to reset the fixture to factory defaults?
Go to Menu → Factory Reset and press Enter. Confirm by selecting Yes and pressing Enter.
What is the recommended cleaning procedure?
Use a soft, lint-free cloth slightly dampened with water or mild cleaner. Do not use abrasive chemicals. Clean the lens and vents regularly.
How do I link multiple fixtures in Master/Slave?
Set one fixture as Master (choose Master/Slave mode) and others as Slave (set to Slave mode). Connect them via DMX cable from Master's DMX Out to Slave's DMX In.
Can the fixture be mounted upside down?
Yes, it has a bracket that allows hanging. Ensure the safety cable is attached to the designated loop for secondary support.
What is the maximum ambient temperature for operation?
The maximum ambient operating temperature is 45°C (113°F). Do not operate in higher temperatures to avoid overheating.
How do I replace a blown LED?
Contact American DJ or an authorized service center. The LED modules are replaceable, but repair should be done by a qualified technician.
User questions about 7P HEX IP American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 7P HEX IP - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7P HEX IP by American DJ.