MWP-32 - Fan MPM - Free user manual and instructions
Find the device manual for free MWP-32 MPM in PDF.
| Product Type | Fan |
| Brand | MPM |
| Model | MWP-32 |
| Power Supply | 220-240V ~ 50Hz |
| Power Consumption | 60 W |
| Speed Settings | 3 (Low, Medium, High) |
| Oscillation | Yes, 90° |
| Tilt Adjustment | Yes, manual tilt |
| Blade Diameter | 32 cm |
| Height | 130 cm (adjustable) |
| Weight | 4.5 kg |
| Control Type | Manual buttons on base |
| Remote Control | Not included |
| Timer | Not available |
| Safety Feature | Overheat protection |
| Material | Plastic and metal |
| Color | White/Grey |
| Noise Level | ≤ 55 dB |
| Cleaning | Wipe with damp cloth; detachable front grille |
| Spare Parts | Contact MPM support |
Frequently Asked Questions - MWP-32 MPM
User questions about MWP-32 MPM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Fan in PDF format for free! Find your manual MWP-32 - MPM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MWP-32 by MPM.
USER MANUAL MWP-32 MPM
EN We wish you satisfaction from using the product and invite you to check a wide range of other MPM appliances
natural_image
Yellow and black industrial fan with four blades, mounted on a stand (no visible text or symbols)MPM agd S.A.



SICHERHEITSHINWEISE
-Read carefully this manual before using the appliance.
-Close supervision is necessary when using the appliance near children.
- Do not hang the power cord over sharp edges and do not allow the power cord to touch hot surfaces.
-Always unplug the appliance when it is not in use or before cleaning.
- Do not use the appliance if it is damaged, also if the power cord or plug is damaged - return the appliance for repair to an authorized service centre.
-To avoid the risk of damage or injury, always use the attachments recommended by the manufacturer.
- Do not immerse the appliance, its cord and plug in water or any other liquids, keep it dry at all times.
-Do not leave the appliance switched on when unattended.
-Always switch off the appliance before unplugging it.
-Do not place the appliance in vicinity of heat sources.
- Do not use the appliance for the purposes different than it was designed for.
-Do not use the appliance outdoors.
- Never insert your fingers nor any other items through the guard when the appliance is running.
-Before moving the appliance to another location disconnect it from the power source.
-Do not cover the front and rear guard!
- Do not place the appliance near open windows - raindrops may cause a short circuit and electrical shock! It is advisable not to place fans in rooms with high humidity, such as bathrooms.
- This appliance is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
- Do not switch on the appliance without front and rear guard mounted.
- The appliance may be switched on only after complete assembly. Partially assembled unit does not provide safe and proper operation.
-The appliance shall be plugged to an outlet with a protective earth pin.
-Do not plug the power cord with wet hands.
-This appliance is intended for household use only.
- Do not remove the plug from the mains by pulling by the cord.
- Store the appliance and its cord out of reach of children under 8 years of age.
-In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
-Before removing the cover, make sure that the fan is disconnected from the power source.
- WARNING! Do not allow small children to play with the foil as there is a danger of suffocation!
DESCRIPTION OF THE APPLIANCE:
-
Base
-
Propeller with a diameter of 340 mm
-
Cover fixing screws
-
Front and rear guard
-
On/Off switch and speed controls
-
Non-slip feet
-
Hooks for coiling power cord
-
Carrying handle
-
Body rim
-
Circulator body angle adjustment knobs
USING THE APPLIANCE:
NOTE! Before switching on, make sure the circulator is placed on a flat, stable and dry surface! NOTE! Before switching on, make sure the speed of the propeller is set to '0' and then plug the power cord to the wall outlet.
-
Set the desired rotation speed using controls (5): „0” – switched off, „1” – speed I, „2” – speed II, „3” – speed III
-
The direction of air flow is adjustable:
- vertically by tilting the body rim (9)
-
horizontally by turning the circulator cover (4) to the right or left.
-
The total height of the air circulator 470 mm.
CLEANING AND MAINTENANCE:
- Before cleaning the appliance, unplug it from the power outlet.
- The motor cover, controls cover (5) and the base (1) may be cleaned with a damp cloth and a mild detergent.
-
The guards (4) may be occasionally wiped with a brush to remove dust from the holes, rinse in water and dry thoroughly.
-
To clean the blades of the propeller (2) from dust, remove the front guard (4) and then remove the propeller (2) from the motor shaft, wipe it with a damp cloth and wipe dry.
Technical data sheet
| MPM AGD S.A. MODEL: MWP-32 | |||
| Description Symbol Value Unit | |||
| Maximum flow rate of the fan F 43,72 m | ^3/min | ||
| Fan power P 42,78 W | |||
| Operating value SV 1,02 (m | ^3/min)/W | ||
| Power consumption in standby mode | P_SB | 0 | W |
| Fan's sound power level | L_WA | 59,7 | dB(A) |
| Maximum air speed | c | 2,753 | m/s |
| Standards used for measuring the operational values | EN IEC 60879: 2019 EN IEC 60704-2-7:2020 EN IEC 60704-1: 2021 EN 50564: 2011 | ||
| To get additional information, contact | MPM AGD S.A. ul. Brzozowa 3 Milanówek 05-822, Polska tel. (22) 380-52-00 BDO: 000027599 | ||
TECHNICAL DATA:
The technical parameters are given on the data plate of the product.
Length of power cord: 1,52 m
NOTE! MPM agd S.A. reserves its right to modify the technical data!
CE
Proper disposal of the product (waste electrical and electronic equipment)

Marking on the product indicates that after the service-life of the product expires, it should not be disposed with other type of municipal waste. Used equipment may have a negative impact on the environment and health of people due to potentially containing hazardous substances, mixtures and components. Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points, the user should contact the municipal point of electric waste collection or used equipment processing department.