NH-D9 DX-3647 4U - PC Fan Noctua - Free user manual and instructions

Product Type	CPU Cooler (PC Fan)
Brand	Noctua
Model	NH-D9 DX-3647 4U
Socket Compatibility	Intel LGA 3647 (Square ILM)
Dimensions (with fan)	95 x 95 x 126 mm
Weight (with fan)	530 g
Fan Model	Noctua NF-A9 PWM
Fan Speed	2000 RPM (max)
Airflow	78.9 m³/h (max)
Noise Level	22.8 dB(A) (max)
Power Input	12V DC, 0.06A
Thermal Resistance	0.28 K/W (typical)
Main Features	4U low-profile design, copper base, aluminium fins, nickel plating, PWM control
Maintenance	Clean with compressed air or soft brush; avoid liquids
Safety Precautions	Ensure proper mounting to motherboard; keep fan free of obstructions
Spare Parts Available	Replacement fan, mounting kit, thermal compound
Warranty	6 years (manufacturer limited)

Frequently Asked Questions - NH-D9 DX-3647 4U Noctua

Is the NH-D9 DX-3647 4U compatible with my Intel Xeon Scalable processor?

Yes, it is designed for Intel Xeon Scalable (LGA3647) processors with Square ILM. It supports all Xeon Scalable CPUs, including Platinum, Gold, Silver, and Bronze series.

What are the exact dimensions of this cooler?

The NH-D9 DX-3647 4U measures 95 mm (width) x 95 mm (depth) x 126 mm (height) with the fan installed. This height ensures compatibility with 4U rackmount cases.

Does the cooler come with thermal paste?

Yes, it includes a tube of Noctua NT-H1 premium thermal compound for optimal thermal transfer.

Can I install a second fan for push-pull configuration?

Yes, the NH-D9 DX-3647 4U supports an optional second NF-A9 fan using included fan clips. This can improve airflow and cooling performance.

What is the noise level at typical operation?

The fan operates at up to 2000 RPM with a maximum noise of 22.8 dB(A). At lower speeds via PWM control, it becomes nearly inaudible.

How do I clean the cooler?

Use compressed air or a soft brush to remove dust from the fins and fan. Do not use water or solvents. For deep cleaning, remove the fan and clean separately.

Is this cooler compatible with dual-socket motherboards?

Yes, it is designed for single-socket use but can be installed on dual-socket boards as long as there is enough clearance between the sockets.

What mounting tools are included?

The package includes a full mounting kit: backplate, screws, standoffs, and a Noctua NM-IMB Phillips screwdriver. No additional tools are required.

How long is the warranty period?

Noctua offers a 6-year manufacturer's warranty for the NH-D9 DX-3647 4U, covering defects in materials and workmanship.

Can I use this cooler with an LGA2011 or LGA2066 socket?

No, the NH-D9 DX-3647 4U is exclusively designed for the LGA3647 socket. For other sockets, consider Noctua's NH-D9L or NH-U9 series.

USER MANUAL NH-D9 DX-3647 4U Noctua

Our DX line of coolers has become a default choice in high performance quiet cooling solutions for Intel Xeon CPUs and the latest DX-3647 revision supports LGA3647 (both Square and Narrow ILM) based Xeon platforms. Each Noctua product is double checked for flawless operation by our quality control team before it leaves the factory and I'm confident that you will be able to sense some of the research, attention and care we've put into making this product. Enjoy your NH-D9 DX-3647 4U!

Yours sincerely,

This manual will guide you through the installation process of the SecuFirm2 ^TM mounting system step by step.

Prior to installing the cooler, please consult the compatibility list on our website (www.noctua.at/compatibility) and verify that the cooler is fully compatible with your motherboard. Please also make sure that your PC case offers sufficient clearance for the cooler and that there are no compatibility issues with any other components (e.g. tall RAM modules). Double check that the heatsink and fan clips do not make contact with the VGA card or other PCIe cards. Noctua cannot be held responsible for any damage or losses caused by compatibility issues.

Should you encounter any difficulties, please check the FAQs on our website (www.noctua.at/faqs) and don't hesitate to contact our support team at [e-mail].

Multilingual versions of this manual are available on our website: www.noctua.at/manuals

Required mounting parts:

Technical line drawings of two mechanical components with mounting holes and mounting brackets (no text or symbols)

2x NM-XFB6
brackets for square type sockets
2x NM-XFB7
brackets for square type sockets

Two identical isometric diagrams of a mechanical bracket or frame structure, no text or symbols present.

Plastic processor clip square type Plastic processor clip narrow type

Two simple line drawings: a cylindrical component and a diagonal line (no text or symbols)

4x NM-SSC2 Short screws NM-SMT4 mounting tool

1 Determining the socket type (square vs narrow) and selecting the appropriate brackets

Please first check if your motherboard uses square or narrow type socket(s):

Select the NM-XFB6 brackets for square type sockets and the NM-XFB7 brackets for narrow type sockets.

This manual shows the installation procedure on square type sockets, but the procedure is identical on narrow type platforms.

Installing the brackets2

Take the fans off the cooler. Use the included mounting tool and the short screws to install the appropriate brackets to the cooler.

Technical line drawing of a CPU cooling fan assembly with internal cooling pipes and mounting holes (no text or labels)

3D technical illustration of a heat exchanger or cooling unit with cooling fins and cooling elements (no text or symbols)

Technical line drawing of a heat exchanger or cooling unit with cooling fins and cooling elements (no text or symbols)

Caution: Gently tighten the screws until they stop, but don't use excessive force (max. torque xx Nm).

3 Putting the CPU into the processor clip and fixing It to the heatsink

The LGA3647 platform uses a plastic clip that fixes the CPU to the heatsink and ensures that it is properly inserted into the socket. There are different clips for square and narrow type sockets. Please first select the clip that matches your socket type.

Pure technical line drawing of a rectangular component with mounting holes and mounting brackets (no text or symbols)

Put the clip upside down so that the long heatsink latches and posts for heatsink alignment are facing downwards.

Pure technical line drawing of a structural beam with supports (no text or symbols)

Orient the CPU so that the heatspreader is facing downwards and the golden contacts are facing upwards. Be careful not to touch the contacts. Then put the CPU into the clip, align the CPU's pin 1 (golden triangle indicator) with the triangle pin 1 indicator of the clip. Snap the CPU into the clip. Note that you may need to flex the clip a bit for it to latch onto the CPU. Verify that the clip is fully attached to the CPU before proceeding.

Technical line drawing of a mechanical assembly with a red arrow indicating a component (no text or symbols present)

Technical line drawing of a mechanical assembly with mounting brackets and a highlighted section (no text or symbols)

Caution: Some LGA3647 CPUs have a so called OmniPath fabric connector. If your CPU is of this type, you need a different processor clip. Please contact [e-mail] if you have a CPU with OmniPath fabric connector.

Isometric line drawing of a mechanical component with no text or symbols

3D diagram of a heat exchanger or cooling unit with red heating element and cooling fins (no text or symbols)

Turn the heatsink upside down so that the base is facing upwards. Carefully put it down onto the tips of the heatpipes and secure it with your hand so that it cannot tilt and that the fins cannot get bent. Remove the plastic protection cover from the base of the heatsink and be careful not to damage the layer of pre-applied thermal compound.

Caution: If you are not using the heatsink for the first time and it therefore doesn't have a fresh layer of pre-applied thermal compound anymore, you need to apply a thin layer of thermal compound to the CPU yourself before clipping it to the heatsink. If there are residual traces of previous thermal paste or thermal pads on your CPU or on the heatsink, please clean them off first.

Put the processor clip and CPU assembly onto the heatsink's base so that the posts of the clip go through the holes of the heatsink's mounting brackets. Push the clip towards the heatsink base until the latches snap to the mounting brackets.

Technical diagram of a heat exchanger or cooling unit with red arrows indicating mounting points (no text or symbols present)

Verify that all the latches have snapped to the mounting brackets and that the CPU and clip are fully attached to the heatsink.

4 Installing the heatsink to the socket

Remove the plastic dust cover from the CPU socket and put the heatsink and CPU assembly onto the socket, aligning the CPU's pin 1 indicator with the pin 1 indicator of the socket.

Isometric technical diagram of a heat exchanger or cooling unit with cooling fins and cooling tower (no text or labels)

Start fastening the heatsink to the socket by tightening the outer screws (number 1 & 2), starting with the screw at pin 1.

Then tighten the two center screws (number 3 & 4), starting with the screw that is on the opposite side of pin 1:

Caution: Gently tighten the screws until they stop, but don't use excessive force (max. torque xx Nm).

Isometric technical illustration of a heat exchanger or cooling unit with cooling fins and red sensors (no text or symbols)

Installing the fans5

Reattach the fans to the heatsink using the supplied steel clips:

Technical line drawing of a dual-chamber HVAC fan assembly with cooling fins and internal cooling unit (no text or symbols)

Technical line drawing of a CPU fan assembly with cooling fins and heat exchangers (no text or labels)

Technical line drawing of a CPU fan assembly with cooling fins and heat sinks (no text or symbols)

Connect the fans to the motherboard's CPU fan header(s). You can use the supplied y-cable to connect both fans to a single header.

! Removing the heatsink from the socket and the CPU from the heatsink

To remove the heatsink from the socket, please first loosen the screws on the side (number 2) and then loosen the screws at the corners (number 1).

As the CPU is attached to the heatsink through the processor clip, removing the heatsink also removes the processor from the socket. To remove the processor from the heatsink, please first unclip the latches of the processor clip from the mounting brackets on one side.

Then take a flat head screwdriver, slide it in between the heatsink and the CPU from the side and twist it carefully until the thermal compound that holds the CPU to the heatsink becomes loose.

Unclip the latches of the processor clip on the other side and take it off. Be careful not to break the latches and make sure that the CPU doesn't fall off.

Transporting your system!

As it is not possible to reliably calculate or control the forces that act upon a system during transport (e.g. in shipping), we generally recommend, for safety reasons, taking the cooler off. Noctua cannot be held responsible for any damage that may arise due to excessive stress during transport if you keep the heatsink installed.

Warranty, Support and FAQs!

Even with high-grade products and strict quality control, the possibility of defects cannot be eliminated entirely. Therefore, we aim at providing the highest possible level of reliability and convenience by offering a warranty period of 6 years and direct, fast and straightforward RMA service.

Should you encounter any problems with your NH-D9 DX-3647 4U, please don't hesitate to contact our support team: [e-mail]

Please also consult the FAQ section on our website: www.noctua.at/faqs