WTF-F1000 - Machine à effets lumineux Showtec - Free user manual and instructions
Find the device manual for free WTF-F1000 Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine (Light Effects Machine) |
| Model | WTF-F1000 |
| Brand | Showtec |
| Heater Power | 1000 W |
| Warm-up Time | Approx. 4 minutes |
| Fluid Consumption | ~60 ml/min (max output) |
| Tank Capacity | 1 L |
| Fog Output | ~10,000 cu ft/min |
| Dimensions (L x W x H) | 400 x 300 x 200 mm |
| Weight | 8 kg |
| Power Supply | AC 230V / 50-60 Hz |
| Power Consumption | 1000 W |
| Fuse Rating | 10 A |
| Control Methods | Manual, Remote Control (optional), DMX (optional) |
| Features | Continuous or timer-based fog output, adjustable volume |
| Fluid Type | Water-based fog fluid (water-glycerin mix) |
| Maintenance | Clean heater core and pump regularly; use only recommended fluid |
| Safety Features | Thermal overload protection; low-fluid auto shut-off |
| Spare Parts Available | Heater core, pump, fuse, nozzle, remote control |
| Repairability | Modular design allows replacement of key components |
| Operating Environment | Indoor use only; temperature 10-40°C |
| Certifications | CE, RoHS |
| Included Accessories | Power cable, user manual |
Frequently Asked Questions - WTF-F1000 Showtec
What type of fluid should I use with the WTF-F1000?
Always use high-quality, water-based fog fluid specifically designed for fog machines. Avoid oil-based fluids as they can damage the heater core and produce unpleasant odors. Showtec recommends its own brand of fog fluid for best results.
How long does the WTF-F1000 take to warm up?
The warm-up time is approximately 4 minutes. The machine will not produce fog until it reaches the optimal operating temperature. A ready indicator light will show when the machine is ready.
Can I use the WTF-F1000 outdoors?
The WTF-F1000 is designed for indoor use only. Exposure to wind, rain, or extreme temperatures can affect performance and safety. If used outdoors, it must be sheltered from moisture and wind, and the ambient temperature should be between 10-40°C.
How do I clean the WTF-F1000?
After each use, run a cleaning cycle with distilled water or a specialized fog machine cleaner to remove residue from the heater core. Regularly check and clean the nozzle to prevent clogging. Avoid using harsh chemicals.
What safety precautions should I take when operating the WTF-F1000?
Place the machine on a stable, heat-resistant surface. Keep at least 1 meter clearance from flammable materials. Do not block air vents. The machine gets hot during use, so allow it to cool before touching or moving. Use only the specified power supply.
Can I connect the WTF-F1000 to a DMX controller?
The WTF-F1000 does not come with DMX as standard, but it can be used with an optional DMX control module. If equipped, it uses standard 3-pin XLR connectors for DMX input and output. Check your manual for DMX addressing.
Why is my WTF-F1000 not producing fog?
Possible causes: the machine is still warming up, the fluid tank is empty, the pump is clogged, or the thermal overload has tripped. Check the fluid level, wait for warm-up, and ensure proper ventilation. If the problem persists, consult the troubleshooting section of the manual.
How much fog fluid does the WTF-F1000 consume?
At maximum output, the machine consumes approximately 60 ml of fluid per minute. This equates to about 16-17 minutes of continuous fog from a full 1L tank. Actual consumption depends on the output setting and ambient conditions.
What is the maximum continuous run time for the WTF-F1000?
The machine is designed for intermittent use. For continuous operation, it is recommended to allow cool-down periods every 15-20 minutes to prevent overheating. The thermal protection will shut off the machine if it gets too hot.
Where can I find spare parts for the WTF-F1000?
Spare parts such as heater cores, pumps, fuses, and remote controls are available from Showtec authorized dealers or online distributors. Use only genuine parts to maintain safety and performance.
User questions about WTF-F1000 Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Machine à effets lumineux in PDF format for free! Find your manual WTF-F1000 - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WTF-F1000 by Showtec.