Shark - The Meg - Beam One - Lighting Showtec - Free user manual and instructions
Find the device manual for free Shark - The Meg - Beam One Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Beam Light |
| Brand | Showtec |
| Model | Shark - The Meg - Beam One |
| Light Source | 230 W Osram Sirius HRI or equivalent discharge lamp |
| Beam Angle | 2° (parallel beam) |
| Pan Range | 540° |
| Tilt Range | 270° |
| Colors | 14 dichroic filters + white; split colors possible |
| Gobos | 8 rotating gobos + 8 static; gobo shake |
| Prism | 8-facet rotating prism |
| Dimming | 0-100% linear; strobe effect |
| Control | DMX512; 16/20 channels; standalone and master/slave modes |
| Power Supply | AC 100-240V, 50/60Hz; 350W max power consumption |
| Dimensions (mm) | 430 x 350 x 520 (head and base) |
| Weight | Approx. 18.5 kg |
| Maintenance | Clean lenses with soft cloth; check fan filters monthly |
| Safety | CE certified; use safety cable; keep away from flammable materials |
| Spare Parts | Lamp, fuses, power supply module available from Showtec dealers |
| Manual Language | EN (English) |
| Manual Pages | 45 |
Frequently Asked Questions - Shark - The Meg - Beam One Showtec
How do I connect the Shark The Meg Beam One to a DMX controller?
Use standard 3-pin XLR cables. Connect the DMX input of the fixture to the output of your controller. Set the DMX address via the control panel (menu > DMX Settings). Ensure termination on the last fixture.
Can I use the fixture in sound-activated mode without a controller?
Yes. In standalone mode, select 'Sound Active' from the menu. The built-in microphone will trigger light shows to music. Adjust sensitivity via the menu.
How often should I replace the lamp?
The lamp life is typically 2000 hours. Replace when brightness drops or the lamp fails. Always allow the fixture to cool before replacing. Use only specified lamp type (e.g., Osram Sirius HRI 230W).
What does 'DMX address' mean and how do I set it?
The DMX address is the first channel the fixture responds to. For example, address 1 uses channels 1-20 (or 16 depending on mode). Set via menu > DMX Address using the up/down buttons. Each fixture must have a unique address to avoid conflicts.
Why is my fixture not moving or responding?
Check power and DMX cables. Ensure the DMX controller is sending data. Verify the fixture is not in 'Standalone' mode. Try resetting via menu > Factory Reset. If still not working, check fuses and lamp.
How do I clean the lenses and mirrors?
Use a soft, lint-free cloth slightly dampened with isopropyl alcohol. Gently wipe the front lens and any optical surfaces. Do not use abrasive cleaners. Clean periodically to maintain brightness.
Is it safe to mount the fixture overhead?
Yes, but always use a properly rated mounting clamp and safety cable. Ensure the surface can support at least 10 times the fixture weight. Regularly inspect brackets and hardware.
Can I control the fixture via a smartphone app?
No, the Shark The Meg Beam One does not have wireless control. DMX is the only control protocol. For wireless, you'd need an external DMX bridge.
What is the purpose of the 'prism' function?
The 8-facet rotating prism splits the beam into multiple rays, creating dramatic aerial effects. It can be rotated forward or backward at variable speeds via DMX.
How do I update the firmware?
Firmware updates are not user-replaceable for this model. If required, contact Showtec support or an authorized service center.
User questions about Shark - The Meg - Beam One Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Shark - The Meg - Beam One - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Shark - The Meg - Beam One by Showtec.