LX-5 MKII - Pregnant MISSION - Free user manual and instructions
Find the device manual for free LX-5 MKII MISSION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Model | LX-5 MKII |
| Brand | Mission |
| Speaker Configuration | 2-way |
| Driver Complement | 1 x 25 mm tweeter, 1 x 130 mm cone woofer |
| Frequency Response | 42 Hz - 20 kHz |
| Sensitivity | 88 dB (2.83V @ 1m) |
| Impedance | 8 ohms |
| Recommended Amplifier Power | 25 - 120 W |
| Dimensions (H x W x D) | 360 x 210 x 275 mm |
| Weight | 6.5 kg per speaker |
| Enclosure Type | Bass reflex (rear port) |
| Grille | Removable magnetic grille |
| Terminals | Bi-wire compatible gold-plated binding posts |
| Power Supply | Passive (no external power required) |
| Placement | Bookshelf or stand-mount |
| Recommended Stand Height | 60 - 70 cm |
| Cabinet Finish | Vinyl veneer (black or walnut) |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Place on stable surface. Keep away from moisture and heat sources. |
| Spare Parts & Repairability | Contact authorized service center for replacement drivers or crossovers. |
| General Information | Designed for high-fidelity stereo and home theater applications. |
Frequently Asked Questions - LX-5 MKII MISSION
How do I connect the Mission LX-5 MKII speakers to my amplifier?
Use high-quality speaker cables with banana plugs or bare wire. Connect the positive terminal (red) to the amplifier's positive output and the negative terminal (black) to the amplifier's negative output. Ensure a secure connection.
What is the recommended amplifier power for the LX-5 MKII?
The recommended amplifier power is between 25 and 120 watts per channel into 8 ohms. Avoid using an amplifier with less than 25W to prevent distortion at high volumes.
Can I bi-wire or bi-amp the LX-5 MKII speakers?
Yes, the speakers have bi-wire compatible terminals. Remove the metal links between the terminals to use separate cables for the tweeter and woofer, or connect two amplifiers for bi-amping.
Where should I place the speakers for best sound?
Place speakers at ear level when seated, equidistant from the listening position. Keep at least 20 cm from the rear wall to avoid bass boom. Angle them slightly inward towards the listener.
Do I need to break in the speakers?
While not mandatory, a break-in period of 20-50 hours at moderate volume can improve sound quality as the drivers and suspension components loosen up.
What is the frequency response of the Mission LX-5 MKII?
The frequency response is 42 Hz to 20 kHz at ±3 dB, providing extended low-end bass and clear highs.
Can I use the LX-5 MKII as a center channel in a home theater?
While designed as bookshelf speakers, you can use a single LX-5 MKII as a center channel if placed horizontally. However, a dedicated center channel speaker is recommended for optimal dialogue clarity.
How do I clean the speaker grille and cabinet?
Remove the grille carefully. Clean the grille with a soft brush or vacuum on low suction. Wipe the cabinet with a dry, lint-free cloth. Avoid using water or cleaning agents.
What is the impedance rating of the LX-5 MKII?
The nominal impedance is 8 ohms, making them compatible with most stereo and home theater receivers.
Are the Mission LX-5 MKII speakers magnetically shielded?
No, they are not magnetically shielded. Keep them at least 30 cm away from CRT televisions or sensitive electronic devices to avoid interference.
User questions about LX-5 MKII MISSION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual LX-5 MKII - MISSION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX-5 MKII by MISSION.