ESF28 - Scale Etekcity - Free user manual and instructions
Find the device manual for free ESF28 Etekcity in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Bathroom Scale |
| Model | ESF28 |
| Brand | Etekcity |
| Dimensions | 11.8 x 11.8 x 1.2 inches (30 x 30 x 3 cm) |
| Weight | Approx. 2.6 lbs (1.2 kg) |
| Power Source | 2 x AAA batteries (included) |
| Display | Large LCD with backlight |
| Weight Capacity | Up to 400 lbs (181 kg) |
| Measurement Units | kg, lb, st |
| Division | 0.1 lb / 0.05 kg |
| Platform Material | Tempered glass with anti-slip pads |
| Body Composition | Not supported (basic weight only) |
| Bluetooth Connectivity | Not available (standard model) |
| Auto-On | Step-on activation |
| Auto-Off | After 10 seconds of inactivity |
| Low Battery Indicator | Yes |
| Overload Indicator | Yes |
| Safety Features | Overload protection, anti-slip base |
| Cleaning | Wipe with a soft damp cloth; avoid abrasives |
| Storage | Store in a dry, flat place |
| Repairability | Non-repairable consumer product; replace batteries only |
Frequently Asked Questions - ESF28 Etekcity
How do I turn on the scale?
Simply step onto the scale. It will automatically turn on and begin measuring. No buttons are needed.
What batteries does the ESF28 require?
It uses 2 AAA batteries. They are included in the package. Open the battery compartment on the bottom to install.
How do I switch between lb, kg, and st?
Press the unit button on the back of the scale to toggle between lb, kg, and st. The scale must be turned on first.
The display shows 'Err' or 'O-Ld'. What does that mean?
'Err' usually indicates an unstable surface or improper use. Place the scale on a hard, flat floor. 'O-Ld' means overload. The weight exceeds the max capacity of 400 lbs (181 kg).
How do I clean the scale?
Use a soft, damp cloth to wipe the glass surface. Do not use abrasive cleaners or immerse the scale in water to avoid damage.
Why is my weight reading inconsistent?
Ensure the scale is on a hard, level surface. Avoid carpet. Also, measure at the same time of day for consistent results. The scale has 0.1 lb precision.
Does this scale have Bluetooth or an app?
No, the ESF28 is a basic digital scale without Bluetooth connectivity. It only displays weight on the screen.
How do I replace the batteries?
Turn the scale over, slide the battery cover off, remove old AAA batteries, and insert new ones with correct polarity. Close the cover.
The scale shows 'Lo' on the display. What should I do?
'Lo' indicates low battery. Replace the AAA batteries with fresh ones. The scale uses two AAA batteries.
What is the maximum weight this scale can measure?
The maximum weight capacity is 400 lb (181 kg). Exceeding this may damage the scale and cause inaccurate readings.
User questions about ESF28 Etekcity
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual ESF28 - Etekcity and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESF28 by Etekcity.