TECO TWW53HFWDG - Air-conditioner

TWW53HFWDG - Air-conditioner TECO - Free user manual and instructions

Find the device manual for free TWW53HFWDG TECO in PDF.

📄 23 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice TECO TWW53HFWDG - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Air Conditioner
Model TWW53HFWDG
Brand TECO
Cooling Capacity (BTU/h) 12,000
Heating Capacity (BTU/h) 12,000 (Heat Pump)
Power Supply 220-240V ~ 50Hz
Power Consumption (Cooling) 1100 W
Energy Efficiency Class A
Refrigerant R410A
Airflow Rate 400 m³/h
Noise Level 55 dB (Low Speed), 60 dB (High Speed)
Dimensions (W x D x H) 430 x 350 x 700 mm
Weight 30 kg
Coverage Area Up to 30 m²
Functions Cool, Heat, Fan, Dehumidify, Auto, Sleep, Timer, Swing
Filter Type Washable Pre-Filter + Activated Carbon
Remote Control Yes (Included)
Self-Evaporative System Yes (Most water evaporated, occasional drainage needed)
Auto Restart Yes (After power failure)
Installation Kit Included Window Kit, Exhaust Hose, Drain Hose

Frequently Asked Questions - TWW53HFWDG TECO

How do I clean the air filter?
Turn off and unplug the unit. Remove the filter cover, take out the filter, and wash it with lukewarm water and mild detergent. Let it dry completely before reinstalling. Clean every 2 weeks for optimal performance.
Why is my air conditioner not cooling?
Check if the filter is dirty. Clean it if necessary. Ensure all windows and doors are closed. Verify that the exhaust hose is properly installed and not kinked. Also check if the set temperature is lower than the room temperature.
How do I set the timer?
Press the Timer button on the remote or unit. Use the + or - buttons to set the desired time (1-24 hours). The timer can be set for auto-off or auto-on depending on the mode.
What does the error code E4 mean?
Error code E4 usually indicates a problem with the room temperature sensor. Try resetting the unit by unplugging it for 5 minutes. If the error persists, contact a qualified technician.
Does the unit have a heating function?
Yes, the TECO TWW53HFWDG is a heat pump model that provides both cooling and heating. In heating mode, it reverses the refrigeration cycle to warm the room.
How often do I need to drain the water?
In cooling mode, the self-evaporative system recycles most condensate. Under high humidity, the tank may fill. The unit will beep and display 'FL' when it needs draining. Use the drain hose at the back to empty the tank.
Can I use an extension cord?
No, it is not recommended. The air conditioner draws high power and extension cords can overheat. Plug directly into a grounded wall outlet.
What is the recommended room size?
The unit is suitable for rooms up to approximately 30 square meters (320 square feet) under standard conditions. Larger rooms may require a more powerful unit.
How do I use the swing function?
Press the Swing button on the remote control to activate horizontal louver movement. The louvers will oscillate to distribute air evenly throughout the room.
My remote control is not working. What should I do?
First, check the batteries and replace if needed. Ensure there are no obstructions between the remote and the unit. Also, the remote needs to be within 8 meters and pointed at the receiver. If still faulty, contact support.

User questions about TWW53HFWDG TECO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air-conditioner in PDF format for free! Find your manual TWW53HFWDG - TECO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TWW53HFWDG by TECO.

USER MANUAL TWW53HFWDG TECO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TECO

Model : TWW53HFWDG

Category : Air-conditioner