FTXA25C2V1BB - Air-conditioner DAIKIN - Free user manual and instructions
Find the device manual for free FTXA25C2V1BB DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split System Air Conditioner |
| Model Number | FTXA25C2V1BB |
| Cooling Capacity (kW) | 2.5 kW (approx. 8,530 Btu/h) |
| Heating Capacity (kW) | 3.2 kW (approx. 10,920 Btu/h) |
| Power Supply | 220-240 V ~ 50 Hz |
| Indoor Unit Dimensions (W x H x D) | 795 x 287 x 230 mm |
| Outdoor Unit Dimensions (W x H x D) | 745 x 548 x 300 mm |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 30 kg |
| Refrigerant Type | R-32 |
| Energy Efficiency Ratio (EER) | 3.21 W/W (approx. 11.0 Btu/h·W) |
| Seasonal Efficiency (SEER / SCOP) | SEER: 6.1 / SCOP: 4.0 |
| Main Functions | Cooling, Heating, Fan Only, Dehumidification, Auto Mode |
| Fan Speeds | 4 speeds (Auto, Low, Medium, High) plus Quiet Mode |
| Air Flow Direction Control | Auto swing (vertical and horizontal) with remote control |
| Timer | 24-hour on/off timer |
| Remote Control | Infrared remote control with LCD display |
| Filter Type | Washable, antibacterial, and deodorizing filter |
| Filter Cleaning Indicator | Yes (timed cleaning reminder) |
| Self-Diagnosis | Error code display on indoor unit |
| Safety Features | Auto restart, overvoltage protection, compressor delay start |
| Installation | Wall-mounted indoor unit, outdoor unit on bracket or ground |
| Refrigerant Piping (Liquid/Gas) | 6.35 mm (1/4 inch) / 9.52 mm (3/8 inch) |
| Operating Temperature Range | Cooling: -10°C to 46°C; Heating: -15°C to 24°C |
| Sound Pressure Level (Indoor) | 19 - 39 dB(A) (depending on fan speed) |
Frequently Asked Questions - FTXA25C2V1BB DAIKIN
How do I clean the air filter on the FTXA25C2V1BB?
Open the front panel, remove the filter, wash with water and mild detergent, dry thoroughly, and reinstall. The flashing filter indicator on the unit reminds you when cleaning is needed.
What does error code 'A1' mean on the Daikin FTXA25C2V1BB?
Error code 'A1' indicates a PCB (Printed Circuit Board) malfunction. Contact a qualified technician for repair.
Can the FTXA25C2V1BB be used for heating?
Yes, it is a heat pump model that provides both cooling and heating. The heating capacity is approximately 3.2 kW.
What type of refrigerant does the FTXA25C2V1BB use?
It uses R-32 refrigerant, which is more environmentally friendly with lower Global Warming Potential compared to R-410A.
How do I set the timer on the remote control?
Press the TIMER button, then use the TEMP buttons to set the desired time (0.5 to 24 hours). Press TIMER again to confirm. The unit will turn on or off at the set time.
What is the minimum outdoor temperature for cooling operation?
The cooling operation is possible down to -10°C outdoor temperature.
How do I use the 'Quiet' mode?
Press the QUIET button on the remote control. The fan will operate at a very low speed to reduce noise. Note: Cooling or heating capacity may be slightly reduced.
Does the FTXA25C2V1BB have a dehumidification mode?
Yes, press the MODE button until 'DRY' appears on the display. The unit will remove moisture from the air with minimal cooling.
What is the recommended room size for this air conditioner?
With a cooling capacity of 2.5 kW, the FTXA25C2V1BB is suitable for rooms up to approx. 25-30 m² (depending on insulation and sunlight).
How do I reset the filter cleaning indicator?
After cleaning the filter, press and hold the FILTER RESET button (or a combination of buttons, see manual) for 3 seconds until the indicator light turns off.
User questions about FTXA25C2V1BB DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual FTXA25C2V1BB - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTXA25C2V1BB by DAIKIN.