IB-RPA100 - Uncategorized Icy Box - Free user manual and instructions

Product Type	External Hard Drive Enclosure
Compatible Drive	2.5-inch SATA HDD/SSD
Interface	USB 3.0 Type-A (backward compatible with USB 2.0/1.1)
Data Transfer Rate	Up to 5 Gbps (USB 3.0)
Supported Systems	Windows, macOS, Linux
Dimensions	130 x 80 x 15 mm
Weight	80 g
Power Supply	Via USB bus (5V, no external power needed)
Enclosure Material	Aluminum + ABS plastic
LED Indicator	Power and activity LED
Plug and Play	Yes, no driver required
UASP Support	Yes (USB Attached SCSI Protocol)
Ventilation	Passive, no fan
Maintenance	Wipe with a soft, dry cloth
Safety Precautions	Do not expose to liquids or excessive heat
Spare Parts	Not available; enclosure is not user-serviceable
Warranty	2 years limited

Frequently Asked Questions - IB-RPA100 Icy Box

What is the Icy Box IB-RPA100?

The Icy Box IB-RPA100 is an external hard drive enclosure designed for 2.5-inch SATA HDDs or SSDs. It connects via USB 3.0 for high-speed data transfer.

Does the IB-RPA100 require an external power supply?

No, it is bus-powered via the USB port. No external power adapter is needed.

Which operating systems are supported?

The enclosure is compatible with Windows, macOS, and Linux. It works plug-and-play without additional drivers.

Can I use a 3.5-inch hard drive with this enclosure?

No, the IB-RPA100 is specifically designed for 2.5-inch drives only (thickness up to 9.5 mm).

What is the maximum storage capacity supported?

The enclosure supports any 2.5-inch SATA drive. Capacity is limited only by the drive itself; currently up to 5 TB or more.

Does the IB-RPA100 support UASP?

Yes, it supports UASP (USB Attached SCSI Protocol) for faster read/write speeds when connected to a compatible host.

How do I install the drive?

Simply slide the cover off, insert the 2.5-inch SATA drive into the connector, push it down gently, and close the cover. No tools required.

Why is my drive not detected?

Ensure the USB cable is fully connected and the drive is properly seated. Try a different USB port or cable. If using a USB hub, connect directly to the computer.

Can I use this enclosure for backup?

Yes, it is ideal for portable backup. The USB 3.0 interface provides fast data transfers for backups and file storage.

Is the enclosure shockproof?

The aluminum body offers some protection, but it is not fully shockproof. Handle with care and avoid drops.

USER MANUAL IB-RPA100 Icy Box

Simple line drawing of a 3D cube with visible edges and faces (no text or symbols)

ICY BOX®

Quick installation guide IB-RPA100

VESA® adapter for Raspberry Pi® wall mount supported cases

3D rendered mechanical component with multiple ports and a central cavity (no text or symbols visible)

Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:

Warning levels

Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.

Warns of a directly hazardous situation causing death or serious injury.

Warns of a potentially hazardous situation that may cause death or serious injury.

CAUTION

Warns of a potentially hazardous situation that may cause minor injury.

IMPORTANT

Warns of a potential situation that may cause material or environmental damage and

disrupt operative processes.

1. Risk of electrical shock

Contact with parts conducting electricity

Risk of death by electrical shock

• Read the operating instructions prior to use
  • Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels

- Avoid contact with conducting parts

- Do not bring plug contacts in contact with pointed and metal objects

- Use in intended environments only

- Operate the device using a power unit meeting the specifications of the type plate only!

- Keep the device/power unit away from humidity, liquid, vapour and dust

• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs

Safety information

2. Hazards during assembly (if intended)

CAUTION

Sharp components

Potential injuries to fingers or hands during

assembly (if intended)

• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only

3. Hazards caused by a development of heat

IMPORTANT

Insufficient device/power unit ventilation

Overheating and failure of the device/power unit

• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
  • Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit

4. Hazards caused by very small parts and packaging

WARNING

Risk of suffocation

Risk of death by suffocation or swallowing

• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children

5. Potential data loss

IMPORTANT

Data lost during commissioning Potentially irreversible data loss

• Always comply with the information in the operating instructions/Manual
• Exclusively use the product once the specifications have been met
- Back up data prior to commissioning
- Back up data prior to connecting new hardware
- Use accessories enclosed with the product

Safety information

6. Cleaning the device

IMPORTANT

Harmful cleaning agents

Scratches, discolouration, damage caused by moisture or short circuit in the device

• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
  • Make sure there is no residual moisture after cleaning
  • We recommend cleaning devices using a dry, anti-static cloth

7. Disposing of the device

IMPORTANT

Environmental pollution, unsuitable for recycling

Potential environmental pollution caused by components, recycling circle interrupted

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.

If you have any questions, please do not hesitate to contact our support at [e-mail] or visit our website at www.raidsonic.de.

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

1x IB-RPA100, 1x set of screws and standoffs, 1x quick installation guide)

VESA® adapter for Raspberry Pi® wall mount supported cases

• Supports standard VESA ^ of 75 x 75 mm or 100 x 100 mm
- Mount your ICY BOX Pi ^ case to a monitor or TV
• Built with strong and durable 1.5 mm steel
- Adjustable standoffs to support majority of wall mount compatible cases

Assembly

Please follow the drawing to assemble the appropriated case to the IB-RPA100

Screw A

Screw B

Standoff C

Nut D

Standoff E

Screw F

Handbuch IB-RPA100

Diagram showing two screw-like components and a mechanical component with an arrow indicating direction (no text or symbols)

Top-down view of a device with two switches and three circular buttons, shown in two different orientations (no text or symbols)

Close-up of two cylindrical objects on a plain surface, one lying flat and one tilted upward (no text or symbols visible)

Close-up of a mechanical component with two white arrows pointing to specific features (no text or symbols visible)

Close-up of a white electronic device with two plus signs and three circular buttons below, no visible text or symbols.

Metal electrical enclosure with mounting holes and mounting brackets (no visible text or symbols)

Manual IB-RPA100

Exterior view of a white electronic device with internal ports (no visible text or symbols)

CE

© Copyright 2019 by RaidSonic Technology GmbH. All Rights Reserved

The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have. Raspberry Pi® is a trademark of the Raspberry Pi Foundation. All other trademarks and brand names are the Property of their respective owners.