JB 3016 - Disk array Infortrend - Free user manual and instructions
Find the device manual for free JB 3016 Infortrend in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Disk Array Enclosure |
| Form Factor | 3U Rackmount |
| Drive Bays | 16 x 3.5-inch SAS/SATA |
| Dimensions (W x D x H) | 19 x 25.6 x 5.2 inches (482 x 650 x 132 mm) |
| Weight | Approximately 25 kg (empty) |
| Power Supply | Dual redundant 650W hot-swappable PSUs |
| Cooling | Dual redundant hot-swappable fan modules |
| Host Interface | 1 x mini-SAS HD (SFF-8644) per controller |
| Controller | Single or dual active-active controllers |
| RAID Support | RAID levels 0, 1, 5, 6, 10, 50, 60 (with controller) |
| Expansion | Up to 4 cascaded units via SAS |
| Management | Web GUI, CLI, SNMP, LCD panel |
| Supported Drives | SAS (12 Gbps) or SATA (6 Gbps) HDD/SSD |
| Max Capacity | Up to 256 TB (with 16 TB drives) |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Operating Humidity | 20% to 80% non-condensing |
| Safety Compliance | CE, FCC, UL, RoHS |
| Maintenance | Clean with dry cloth; ensure adequate airflow |
| Repairability | Hot-swap drives/PSU/fans; user-replaceable modules |
| Spare Parts | Drives, PSU, fan, controller, backplane (order from Infortrend) |
Frequently Asked Questions - JB 3016 Infortrend
How do I initialize the JB 3016 disk array?
Connect the unit to a SAS host via the mini-SAS HD port. Install drives and power on. Use the web GUI or LCD panel to configure RAID and create volumes. Refer to the manual for detailed steps.
What RAID levels are supported?
The JB 3016 supports RAID 0, 1, 5, 6, 10, 50, and 60 when equipped with a controller module. As a JBOD enclosure, it requires an external RAID controller for RAID functionality.
Can I mix SAS and SATA drives?
Yes, the JB 3016 supports both SAS and SATA drives, but mixing them in the same RAID group is not recommended. SAS drives are preferred for performance and reliability.
How do I replace a failed drive?
Locate the failed drive via the LED indicator (amber/red). Press the release button, pull the carrier out, insert a new drive, and lock it. The array will automatically rebuild if configured with redundancy.
What is the maximum number of enclosures I can daisy-chain?
You can cascade up to 4 JB 3016 units via the SAS expansion ports to increase capacity and scalability.
Does the JB 3016 come with a controller?
The base model is a JBOD enclosure without an internal RAID controller. However, Infortrend offers versions with single or dual active-active controllers for RAID functionality.
How do I power on and off the unit?
Press the power button on the front panel to turn on/off. For a clean shutdown, first stop I/O via the management interface and then press the button. Always use the dual power supplies for redundancy.
What troubleshooting steps for a fan error?
Check the LCD or management GUI for fan status. Ensure the fan module is securely seated. If the error persists, replace the hot-swappable fan module with a new one from Infortrend.
Can the JB 3016 be mounted in a rack?
Yes, it is a 3U rackmount enclosure. Use the included rack rails and screws to secure it in a standard 19-inch rack. Ensure proper ventilation and weight distribution.
Where can I download the user manual?
The user manual is available for free download in PDF format from notice-facile.com or the Infortrend support page. Enter your email to receive a translated version if needed.
User questions about JB 3016 Infortrend
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Disk array in PDF format for free! Find your manual JB 3016 - Infortrend and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JB 3016 by Infortrend.