SIP Audio Converter - Hi-Fi System 2N - Free user manual and instructions
Find the device manual for free SIP Audio Converter 2N in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SIP Audio Converter / Intercom |
| Category | Hi-Fi System (Intercom/Paging) |
| Brand | 2N |
| Model | SIP Audio Converter |
| Dimensions (W x H x D) | 200 x 45 x 150 mm |
| Weight | 1.5 kg |
| Power Supply | PoE (802.3af) or 12V DC, 10W max |
| Audio Inputs | 1x Line-in (3.5mm), 1x Mic |
| Audio Outputs | 1x Line-out (3.5mm), 1x Speaker (4Ω, 2W) |
| Network Interface | 10/100 Mbps Ethernet, RJ-45 |
| Supported Protocols | SIP (RFC 3261), RTP, RTCP, HTTP/HTTPS |
| Audio Codecs | G.711, G.722, G.729, Opus |
| Main Functions | SIP call, audio streaming, intercom, paging, multicast |
| Management | Web GUI, SNMP, REST API |
| Mounting | Desktop or wall mount, optional 19" rack kit |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean with soft dry cloth; no liquids |
| Safety | Class 2 device, indoor use only, avoid moisture |
| Spare Parts & Repairability | Contact 2N authorized service; no user-serviceable parts |
| General Information | Free manual available at notice-facile.com |
Frequently Asked Questions - SIP Audio Converter 2N
How do I connect the SIP Audio Converter to my network?
Connect the device to your LAN using an Ethernet cable. Ensure your network supports DHCP or assign a static IP via the web interface at the default IP (if known). The device supports PoE, so no separate power is needed if your switch provides it.
What audio codecs does the 2N SIP Audio Converter support?
It supports G.711 (A-law/μ-law), G.722, G.729, and Opus. These codecs ensure compatibility with most SIP-based systems and good audio quality.
Can I use this device for paging announcements?
Yes, the SIP Audio Converter supports multicast paging. Configure a multicast address in the web interface and your PBX can send page commands to all devices on that group.
How do I reset the device to factory defaults?
Press and hold the reset button (located on the rear panel) for at least 10 seconds using a paperclip. The device will reboot with default settings (IP: 192.168.1.100, no password).
What is the maximum speaker output power?
The built-in speaker output delivers 2W into a 4Ω load. For higher volume, connect an external amplified speaker to the line-out.
Does the device support SIP TLS/SRTP for encrypted communication?
Yes, if you need secure communications, enable TLS for SIP and SRTP for audio in the security settings. Make sure your PBX also supports these protocols.
How do I update firmware on the SIP Audio Converter?
Download the latest firmware from the 2N support website. Log into the web GUI, go to Administration > Firmware, upload the .bin file, and restart. Do not power off during update.
Can I connect a microphone directly to the device?
Yes, there is a dedicated microphone input (3.5mm). Use an electret condenser mic; the device provides bias voltage. Configure the mic gain from the web interface.
What is the default IP address of the device?
Out of the box, it attempts to obtain an IP via DHCP. If that fails, it uses a fallback IP of 192.168.1.100. Check your router's DHCP list or use the 2N Discovery Tool to find the assigned IP.
Is the device compatible with any SIP PBX?
It works with most standards-compliant SIP PBXs such as Asterisk, 3CX, FreePBX, and cloud platforms like Teams or Zoom via SIP trunk. Ensure codec and port settings match.
User questions about SIP Audio Converter 2N
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual SIP Audio Converter - 2N and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SIP Audio Converter by 2N.