IPC328SB-ADF28K-I0 - Security Camera UniView - Free user manual and instructions
Find the device manual for free IPC328SB-ADF28K-I0 UniView in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (IP) |
| Model | IPC328SB-ADF28K-I0 |
| Image Sensor | 3 Megapixel CMOS |
| Maximum Resolution | 2048 x 1536 (3MP) |
| Lens Type | Fixed focal, 2.8mm |
| Night Vision | Up to 30m IR distance |
| Day/Night Mode | Mechanical IR cut filter |
| Video Compression | H.265+, H.265, H.264+, H.264 |
| Frame Rate | 25/30 fps at 3MP |
| Smart Features | Motion detection, tampering alarm |
| Protection Rating | IP67 weatherproof |
| Power Supply | 12V DC or PoE (802.3af) |
| Power Consumption | ≤ 7W |
| Dimensions (W x H x D) | 70 x 70 x 180 mm (bullet type) |
| Weight | Approx. 0.5 kg |
| Operating Temperature | -30°C to 60°C |
| Storage Interface | Micro SD card (up to 256 GB) |
| Network Interface | 1 RJ45 10/100Mbps Ethernet |
| Audio | Built-in microphone |
| Alarm I/O | 1 alarm input / 1 alarm output |
Frequently Asked Questions - IPC328SB-ADF28K-I0 UniView
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip until you hear a beep. The camera will reboot with factory settings.
What power adapter do I need?
The camera supports 12V DC (2A) or PoE IEEE 802.3af. If using DC, ensure the power adapter is rated for 12V and at least 1A.
Can I view the camera remotely?
Yes, download the UniView app or use a web browser. Add the camera by scanning the QR code on the device label and set a password.
How do I mount the camera outdoors?
Use the included mounting bracket and screws. Ensure the mounting surface is solid. Route cables through the bracket to avoid water ingress, and seal connections with waterproof tape.
Why is the night vision not working?
Check that the IR LEDs are not obstructed. Ensure the camera is set to night mode (auto switch). If using PoE, verify the switch provides enough power.
What is the maximum SD card capacity?
The camera supports microSD cards up to 256 GB. Format the card as FAT32 before insertion.
How to update the firmware?
Download the latest firmware from the UniView website. In the camera’s web interface, go to Maintenance > Upgrade and select the file. Do not power off during update.
How do I enable motion detection alerts?
Log into the camera web interface, go to Event > Motion Detection. Draw a detection area and set sensitivity. Save settings and configure notification methods (email, app push).
The image is blurry, what can I do?
Clean the lens with a soft cloth. Ensure the focus is not adjusted – this camera has a fixed focus lens. Check the resolution settings in the camera setup.
Can I use this camera with an NVR?
Yes, it supports ONVIF Profile S and can be added to any compatible NVR. For best results, use a UniView NVR.
User questions about IPC328SB-ADF28K-I0 UniView
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual IPC328SB-ADF28K-I0 - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC328SB-ADF28K-I0 by UniView.