TTE100 - Uncategorized Copernicus - Free user manual and instructions
Find the device manual for free TTE100 Copernicus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Timer |
| Brand | Copernicus |
| Model | TTE100 |
| Dimensions | 80 x 60 x 20 mm |
| Weight | 50 g (with battery) |
| Power Supply | 1 x AAA battery (included) |
| Display | LCD, 4-digit |
| Functions | Countdown, stopwatch, alarm, memory recall |
| Max Time Setting | 99 minutes 59 seconds |
| Accuracy | ±1 second per day |
| Material | ABS plastic |
| Color | White with grey buttons |
| Cleaning | Wipe with a soft, dry cloth |
| Safety Precautions | Keep away from water and heat sources |
| Battery Life | Approximately 1 year under normal use |
| Spare Parts | Battery cover, AAA battery |
| Repairability | Battery replacement only; non-repairable by user |
| Operating Temperature | 0°C to 40°C |
| Mounting | Tabletop or wall-mountable (adhesive strip included) |
| Warranty | 1 year limited |
Frequently Asked Questions - TTE100 Copernicus
How do I set the countdown time on the Copernicus TTE100?
Press the MODE button until the countdown mode is displayed. Use the HOUR and MIN buttons to set the desired time. Press START/STOP to begin.
What battery does the TTE100 use and how do I replace it?
It uses one AAA battery. Slide the battery cover on the back, remove the old battery, insert a new one observing polarity, and close the cover.
The display is dim or not working. What should I do?
First, check if the battery is installed correctly or replace it with a fresh one. If the issue persists, press the RESET button at the back with a pin.
Can I use the TTE100 as a stopwatch?
Yes, press MODE until the stopwatch icon appears. Press START/STOP to start and stop timing. Press RESET to zero.
How do I set the alarm?
Press MODE to reach alarm mode. Use HOUR and MIN to set the alarm time. Press START/STOP to activate. An alarm icon will show.
What is the maximum countdown time?
The maximum time is 99 minutes and 59 seconds. After that, the timer resets to zero.
Does the timer have a memory function?
Yes, after countdown ends, the last set time is stored. Press START/STOP again to repeat the same countdown.
How do I clean the TTE100?
Use a soft, dry cloth to wipe the surface. Do not use water or chemical cleaners, and avoid getting moisture into the device.
Can I mount the timer on a wall?
Yes, the timer has a wall-mountable design. Use the included adhesive strip or a small screw (not provided) through the keyhole slot on the back.
What should I do if the buttons are unresponsive?
Try pressing the RESET button with a pin. If that doesn't help, remove the battery for 10 seconds and reinsert it. Contact support if the problem continues.
User questions about TTE100 Copernicus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TTE100 - Copernicus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TTE100 by Copernicus.