Wave Packets - Synthesizer Auza - Free user manual and instructions
Find the device manual for free Wave Packets Auza in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Synthesizer Module |
| Brand | Auza |
| Model | Wave Packets |
| Category | Digital Synthesizer |
| Sound Engine | Virtual Analog & Wavetable |
| Polyphony | 8 Voices |
| Oscillators | 2 per Voice (with sub-oscillator) |
| Oscillator Waveforms | Saw, Square, Triangle, Sine, Noise, plus 64 Wavetables |
| Filter | Multi-mode (Low-pass, High-pass, Band-pass, Notch) 24dB/oct |
| Envelope Generators | 2 ADSR (Amp & Filter) |
| LFO | 1 (with sync, key sync, and wave shaping) |
| Effects | Reverb, Delay, Chorus, Distortion |
| Arpeggiator | Yes (various modes and patterns) |
| Sequencer | 16-Step Polyphonic Sequencer |
| MIDI Connectivity | USB-MIDI (Type B), MIDI In/Out (5-pin DIN) |
| Audio Outputs | 2x 1/4" TS (Left/Mono, Right) |
| Headphone Output | 1/8" Stereo Jack |
| Display | 128x64 OLED Display |
| Power Supply | 9V DC (center-positive, 500mA) via included adapter |
| Dimensions (W x D x H) | 32.0 cm x 20.0 cm x 6.0 cm |
| Weight | 1.5 kg |
| Construction | Metal chassis with plastic side panels |
| Warranty | 2 Years (limited) |
Frequently Asked Questions - Wave Packets Auza
How do I connect the Auza Wave Packets to my computer?
Use a USB cable (Type B to Type A) to connect the Wave Packets to your computer. It will be recognized as a MIDI device. For audio, connect the audio outputs to your audio interface or speakers.
How do I save and load patches?
Press the Save button to store the current patch into one of 128 user memory slots. To load, press Load and select a patch using the data knob.
Can I use the arpeggiator with an external sequencer?
Yes, the arpeggiator can sync to external MIDI clock. Set the sync source to MIDI in the global settings.
How do I update the firmware?
Download the latest firmware from the Auza website, copy to a FAT32 formatted USB drive, insert into the Wave Packets's USB port, and follow the on-screen instructions.
What type of power adapter do I need?
The Wave Packets requires a 9V DC power supply with center-positive polarity and at least 500mA current. Use only the included adapter to avoid damage.
Can I use it as a standalone synth without a computer?
Absolutely. The Wave Packets has built-in sounds, arpeggiator, and sequencer. Connect headphones or speakers to the audio outputs for standalone use.
How do I clean the synth?
Wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid harsh chemicals or abrasive materials.
What is the maximum polyphony?
The Wave Packets offers 8 voices of polyphony, meaning up to 8 notes can sound simultaneously.
Can I use external effects pedals?
Yes, connect external effects pedals between the audio outputs and your mixer/audio interface. The Wave Packets works well with both guitar pedals and rack effects.
Is there a risk of overheating?
The Wave Packets is designed to operate within a safe temperature range. Ensure adequate ventilation around the unit and avoid placing it in direct sunlight or near heat sources.
User questions about Wave Packets Auza
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Wave Packets - Auza and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Wave Packets by Auza.