Z726XKW-2-60 - Lawn mower KUBOTA - Free user manual and instructions
Find the device manual for free Z726XKW-2-60 KUBOTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Zero-Turn Lawn Mower |
| Brand | Kubota |
| Model | Z726XKW-2-60 |
| Deck Width | 60 inches |
| Engine Power | 26 hp |
| Engine Type | Gasoline, air-cooled |
| Fuel Type | Gasoline |
| Cutting Height Range | 1.5 to 5 inches |
| Blade Engagement | Electric (PTO switch) |
| Drive System | Hydrostatic, dual lever |
| Fuel Capacity | 10 gallons |
| Weight | Approx. 1,200 lbs |
| Overall Length | 72 inches |
| Overall Width | 64 inches |
| Overall Height | 46 inches |
| Seat | High-back suspension seat |
| Hour Meter | Yes, standard |
| Anti-Scalp Wheels | Yes, 4 |
| Maintenance Interval | Change engine oil every 50 hours; air filter every 100 hours |
| Blade Replacement | Use genuine Kubota blades, torque to 50 ft-lbs |
| Safety Features | Operator presence control, parking brake, blade brake clutch |
| Parts Availability | Genuine parts from Kubota dealers |
| Manual Languages | English (96 pages) |
Frequently Asked Questions - Z726XKW-2-60 KUBOTA
How do I start the Z726XKW-2-60 mower?
Ensure the parking brake is engaged, blade clutch is disengaged, and move the throttle to the choke position. Turn the ignition key to start. Once running, push the throttle to full and release the brake.
What type of oil should I use for the engine?
Use SAE 10W-30 or 10W-40 automotive engine oil with API service classification SG, SH, SJ or higher. Change oil every 50 hours of operation.
How do I adjust the cutting height?
The cutting height is adjusted by a single lever on the operator's right side. Move the lever to the desired position (1.5 to 5 inches) and ensure all deck wheels are set accordingly.
What should I do if the mower vibrates excessively?
Check for debris under the deck, inspect blades for damage or imbalance, and ensure all blade bolts are torqued properly. Also verify that the deck is level.
How often should I clean the air filter?
Clean or replace the air filter every 100 hours of operation, or more often if operating in dusty conditions. Use a genuine Kubota filter.
Where can I find replacement parts for this mower?
Genuine Kubota parts are available at authorized Kubota dealers. You can also order online using the model number Z726XKW-2-60.
What is the proper way to engage the blades?
Ensure the mower is at full throttle, then push the electric PTO switch to the ON position. The blade clutch will engage. Never engage blades with the engine at idle.
How do I level the mower deck?
Park on a level surface, stop the engine, and check blade height. Adjust the deck hanger rods equally on both sides to achieve a 1/4 inch lower front blade tip. Refer to the manual for detailed steps.
What safety precautions should I take when operating?
Always wear eye and ear protection, avoid mowing on slopes over 15 degrees, keep bystanders away, and engage the parking brake before leaving the seat. Never bypass safety switches.
How do I transport the mower?
Set the deck to the highest cutting position, disengage the blades, and secure the mower on a trailer with tie-downs. Ensure the fuel valve is off and the battery is disconnected if storing.
User questions about Z726XKW-2-60 KUBOTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual Z726XKW-2-60 - KUBOTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Z726XKW-2-60 by KUBOTA.