Spectra IV SD423-F0-X - Surveillance Camera Pelco - Free user manual and instructions
Find the device manual for free Spectra IV SD423-F0-X Pelco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | PTZ Dome Camera |
| Model | Spectra IV SD423-F0-X |
| Brand | Pelco |
| Image Sensor | 1/4.7" CMOS, 2 Megapixels |
| Resolution | 1920 x 1080 at 30 fps |
| Lens | 4.5–90 mm, f/1.6–2.8, 20x optical zoom |
| Pan Range | 360° continuous |
| Tilt Range | 0° to 90° |
| Minimum Illumination | 0.005 lux (color), 0.0005 lux (B/W) |
| Video Compression | H.264, H.265, MJPEG |
| Day/Night | True Day/Night with IR cut filter |
| Wide Dynamic Range | Up to 130 dB |
| Network Interface | 10/100 Base-T Ethernet, PoE+ |
| Power Supply | 24 VAC or PoE+ (IEEE 802.3at) |
| Power Consumption | 20 W typical |
| Dimensions | 6.5 in dia. x 8.7 in height (165 x 221 mm) |
| Weight | 3.5 lb (1.6 kg) |
| Operating Temperature | –40°F to 122°F (–40°C to 50°C) |
| Weather Rating | IP66, NEMA 4X |
| Installation | Pendant, wall, or pole mount |
| Maintenance | Clean dome with soft, dry cloth; avoid solvents |
| Security | HTTPS, IP filtering, user authentication |
| Spare Parts | Available through Pelco authorized distributors |
| Warranty | 3 years standard |
Frequently Asked Questions - Spectra IV SD423-F0-X Pelco
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds. The camera will reboot with default settings.
What is the default IP address of the Pelco Spectra IV?
The default IP address is 192.168.0.50. Subnet mask is 255.255.255.0.
Can I use PoE to power the camera?
Yes, the camera supports PoE+ (IEEE 802.3at) and can be powered via Ethernet.
What is the maximum microSD card size supported?
The camera supports microSD cards up to 256 GB for onboard storage.
Does the camera support ONVIF?
Yes, the Spectra IV is ONVIF Profile S and G compliant.
How do I set up motion detection?
Access the camera web interface, go to Events > Motion Detection, and configure the detection zones and sensitivity.
What is the frame rate at 2MP?
The camera can stream 1920x1080 at up to 30 frames per second.
Are there any special cleaning requirements for the dome?
Use a soft, lint-free cloth lightly dampened with water. Do not use alcohol or ammonia-based cleaners.
Can I mount the camera outdoors?
Yes, the camera is IP66 rated and suitable for outdoor use in extreme temperatures.
What software is compatible with the Spectra IV?
The camera works with Pelco VideoXpert, Endura, and third-party VMS via ONVIF.
User questions about Spectra IV SD423-F0-X Pelco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual Spectra IV SD423-F0-X - Pelco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spectra IV SD423-F0-X by Pelco.