ARUV241BTE5 - Air-conditioner LG - Free user manual and instructions
Find the device manual for free ARUV241BTE5 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model Number | ARUV241BTE5 |
| Cooling Capacity (BTU/h) | 24,000 |
| Heating Capacity (BTU/h) | 24,000 (Heat Pump) |
| Energy Efficiency Ratio (EER) | 12.0 |
| Seasonal Energy Efficiency Ratio (SEER) | 18.0 |
| Power Supply (V/Hz/Ph) | 230V / 50Hz / 1Ph |
| Refrigerant Type | R32 |
| Indoor Unit Dimensions (WxHxD, mm) | 1050 x 370 x 290 |
| Outdoor Unit Dimensions (WxHxD, mm) | 870 x 655 x 320 |
| Indoor Unit Weight (kg) | 13.5 |
| Outdoor Unit Weight (kg) | 38.0 |
| Operating Modes | Cool, Heat, Fan, Dry, Auto |
| Fan Speeds | 3 + Auto |
| Airflow Volume (m³/h) | 700 |
| Noise Level Indoor (dB(A)) | 42 (Low), 48 (High) |
| Noise Level Outdoor (dB(A)) | 52 |
| Timer Function | On/Off Timer (24h) |
| Remote Control | Infrared (included) |
| Air Filter | Washable, Anti-bacterial |
| Self-Diagnosis | Yes |
| Defrost Function | Automatic (Heating mode) |
| Installation Type | Wall-mounted |
| Safety Features | Overload Protection, Auto Restart |
| Maintenance | Clean filter every 2 weeks |
Frequently Asked Questions - ARUV241BTE5 LG
How often should I clean the air filter?
Clean the air filter every 2 weeks to maintain efficiency. Use a vacuum or wash with mild detergent and let it dry completely before reinstalling.
What is the recommended temperature setting for cooling?
For optimal comfort and energy savings, set the thermostat to 24-26°C (75-78°F) in cooling mode.
How do I use the timer function?
Press the Timer button on the remote. Use the + or - buttons to set the desired on/off time up to 24 hours. Confirm by pressing the Timer button again.
What does the 'Auto Clean' function do?
The Auto Clean function dries the indoor unit's heat exchanger to prevent mold and bacteria growth after operation. It runs for about 30 minutes when you turn off the unit.
Why is my air conditioner not cooling properly?
Check if the air filter is dirty, ensure all doors and windows are closed, and verify the unit is set to Cool mode with a temperature lower than the room temperature. If the problem persists, contact a technician.
Can I use an extension cord?
No. Always plug the air conditioner directly into a dedicated power outlet with the correct voltage rating. Extension cords may cause overheating or fire hazards.
How do I set the fan speed?
Press the Fan Speed button on the remote to cycle through Low, Medium, High, and Auto. In Auto mode, the fan speed adjusts based on the temperature difference.
What is the difference between Cool and Dry mode?
Cool mode lowers the temperature and dehumidifies. Dry mode primarily removes humidity with minimal cooling, running the fan at low speed.
How do I reset the air conditioner?
Unplug the unit for 5 minutes, then plug it back in. This will reset the control board. If issues persist, consult the manual or a service center.
Does the unit have a heating function?
Yes, the ARUV241BTE5 is a heat pump model that can provide heating. Switch the mode to Heat and set the desired temperature. Note that heating efficiency decreases in extremely cold weather.
User questions about ARUV241BTE5 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual ARUV241BTE5 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARUV241BTE5 by LG.