Esotec MW 172 - Pregnant DYNAUDIO - Free user manual and instructions
Find the device manual for free Esotec MW 172 DYNAUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Mid-Woofer Speaker |
| Brand | Dynaudio |
| Model | Esotec MW 172 |
| Driver Size | 6.5 inches (165 mm) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 80 W |
| Power Handling (Peak) | 160 W |
| Sensitivity | 88 dB (2.83 V/1 m) |
| Frequency Response | 50 Hz - 4 kHz |
| Magnet Type | Ferrite |
| Voice Coil Diameter | 1.5 inches (38 mm) |
| Mounting Depth | 65 mm (2.56 in) |
| Mounting Diameter | 145 mm (5.71 in) |
| Weight | 1.2 kg (2.65 lbs) |
| Recommended Enclosure | Sealed or vented (0.5-1.0 cu ft) |
| Included Accessories | Mounting hardware, grille, wiring harness |
| Maintenance | Wipe with dry cloth; avoid moisture and solvents |
| Safety Precautions | Do not exceed rated power; secure mounting to prevent loosening |
| Spare Parts Availability | Contact authorized Dynaudio dealer for replacements |
Frequently Asked Questions - Esotec MW 172 DYNAUDIO
What is the recommended amplifier power for the Esotec MW 172?
The speaker handles 80 W RMS and 160 W peak. Use an amplifier delivering 50-120 W RMS per channel for optimal performance.
What is the impedance of this speaker?
The nominal impedance is 4 ohms, making it suitable for most car audio amplifiers.
What is the mounting depth required?
The mounting depth is 65 mm (2.56 inches). Ensure sufficient clearance behind the speaker.
Can I use this speaker in a sealed enclosure?
Yes, it works well in sealed enclosures from 0.5 to 1.0 cubic feet. Vented enclosures are also possible with proper tuning.
What is the frequency response of the MW 172?
The frequency response is 50 Hz to 4 kHz, making it ideal as a mid-woofer paired with tweeters or a subwoofer.
Does it come with a grille?
Yes, the package includes a protective grille and mounting hardware.
What is the sensitivity rating?
The sensitivity is 88 dB at 2.83 V/1 m, requiring moderate amplifier power for high volume.
Is the speaker compatible with factory wiring?
Yes, but ensure the wiring can handle up to 80 W RMS. Upgrading to thicker wire may improve performance.
How do I clean the speaker?
Wipe the cone and chassis with a dry, soft cloth. Do not use water or cleaning solvents.
What if the speaker gets damaged?
Contact an authorized Dynaudio dealer for repair or replacement parts. Do not attempt to repair yourself.
User questions about Esotec MW 172 DYNAUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Esotec MW 172 - DYNAUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Esotec MW 172 by DYNAUDIO.