BIK9 PP8TS2 PT CH - Oven BAUKNECHT - Free user manual and instructions

Product type	Built-in multifunction oven
Brand	Bauknecht
Model	BIK9 PP8TS2 PT CH
Installation	Built-in in a column or under counter
Usable volume	77 liters (approximate)
Dimensions (H x W x D)	59.5 x 59.5 x 56.8 cm (approximate)
Net weight	40 kg (approximately)
Power supply	220-240 V, 50/60 Hz
Total power	3400 W (approximate)
Cooking modes	9 modes, including convection, top/bottom heat, grill, fan-assisted grill
Special functions	Defrosting, keep warm, pizza cooking and low temperature cooking
Control type	Touch and rotary controls with digital display
Display	Integrated digital display
Cavity lighting	Replaceable LED bulb
Door and glazing	Cold door with soft opening and multiple glazing
Cavity material	Easy-to-clean glossy enamel
Cleaning and maintenance	Pyrolytic cleaning, removable racks and grids, removable door
Safety	Child lock, automatic shutdown, door cooling
Programming	Timer, duration, end of cooking and delayed start
Repairability and spare parts	Heating elements, bulbs, glass panes, thermostats and probes available as spare parts

Frequently Asked Questions - BIK9 PP8TS2 PT CH BAUKNECHT

How should I prepare the oven before first use?

Remove all packaging, accessories and stickers. Wash the cavity and accessories with warm water and dishwashing liquid, then wipe dry. Then heat the empty oven for 30 minutes at 200°C to eliminate new oven odours.

How do I select the convection mode?

Press the mode selection key until the convection mode is displayed. Set the desired temperature using the knob or the + / - keys. Preheat for 5 to 10 minutes before baking.

How do I activate pyrolytic cleaning?

Empty the oven completely and remove the grids and the baking tray. Close the door. Select the Pyrolysis function on the control panel, then confirm. The door locks automatically and the temperature rises to about 500°C to burn off residue. Allow to cool before wiping away the ashes.

What should I do if the oven no longer heats up?

First check the power supply and the clock setting. If an error code appears on the display, note the code, turn off the power for 30 seconds, then restart. If the fault persists, contact the Bauknecht after-sales service.

How do I turn on the cavity lighting while cooking?

The lighting comes on automatically when the door is opened or when an action is performed on the control panel. You can also press the lighting key if your model has one. An LED bulb provides good visibility with low energy consumption.

How do I change the oven bulb?

First switch off the power supply. Remove the grid supports to access the glass diffuser at the rear of the cavity. Unscrew the diffuser, replace the bulb with a compatible model rated for 300°C (type E14). Screw the diffuser back on and restore power to the appliance.

How do I use the delayed start?

Select the mode and temperature, then press the Clock / Programming key to set the desired end time. The oven automatically calculates the start time. Use this function with a separate timer for long cooking times.

What accessories are supplied with the oven?

The appliance is supplied with a metal grid, a baking tray and grid supports. Some models also include a rotisserie accessory or a cooking probe. All accessories are removable and dishwasher-safe.

How do I activate the child lock?

Press and hold the control lock key (often symbolized by a padlock) for 3 seconds until the symbol is displayed. The other keys then become inactive. To deactivate, press and hold the same key for 3 seconds.

How do I maintain the door gasket?

Clean the gasket regularly with a damp sponge and mild soap, then wipe it dry. Avoid using sharp objects or abrasive products that could tear the gasket. A gasket in good condition ensures the door closes properly and reduces energy consumption.

USER MANUAL BIK9 PP8TS2 PT CH BAUKNECHT

ENERG

енергия · ενεργεια

BAUKNECHT

BIK9 PP8TS2 PT CH

A+++

A++

A+

A

B

C

D

A+

73 _L

0.91 kWh/cycle*

0.7 kWh/cycle*