NTG-1 - Microphone RODE - Free user manual and instructions
Find the device manual for free NTG-1 RODE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Shotgun Condenser Microphone |
| Capsule | 0.5" / 12.7 mm condenser |
| Polar Pattern | Supercardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 200 Ω |
| Sensitivity | -36 dB re 1 V/Pa (16 mV/Pa at 1 kHz) |
| Equivalent Noise | 14 dB SPL (A-weighted) |
| Maximum SPL | 135 dB SPL (at 1 kHz, 1% THD) |
| Signal-to-Noise Ratio | 80 dB |
| Power Requirement | +48 V phantom power (P48) |
| Output Connector | 3-pin XLR male |
| Dimensions (Length x Diameter) | 278 mm x 19 mm |
| Weight | 167 g |
| Included Accessories | Windscreen, RM2 stand mount, zip pouch |
| Construction Material | Rugged metal body |
| Warranty | 2 years |
| Cleaning Instructions | Wipe with a soft, dry cloth; store in pouch when not in use |
Frequently Asked Questions - NTG-1 RODE
What phantom power does the NTG-1 require?
The NTG-1 requires standard +48 V phantom power (P48) to operate.
Can I use the NTG-1 directly with a DSLR or mirrorless camera?
Yes, with an appropriate XLR to 3.5mm adapter or a recorder/interface that provides phantom power, you can connect it to cameras.
Does the NTG-1 come with a windscreen?
Yes, the NTG-1 includes a foam windscreen to reduce wind noise during outdoor use.
Is the NTG-1 compatible with boom poles?
Yes, it can be mounted on a boom pole using the included RM2 stand mount or a shock mount.
What is the recommended distance from the sound source?
For best results, position the microphone 30 to 60 cm (12-24 in) from the subject.
How can I minimize handling noise?
Use a shock mount (such as Rode SM3) to isolate the microphone from vibrations and handling rumble.
Is the NTG-1 suitable for both indoor and outdoor recording?
Yes, it performs well indoors and outdoors. For outdoor use, always attach the supplied windscreen to reduce wind interference.
What is the frequency response of the NTG-1?
The frequency response is 20 Hz to 20 kHz, providing a natural and detailed sound across the audible spectrum.
How do I clean and maintain the NTG-1?
Wipe the exterior with a soft, dry cloth. Avoid moisture and store in the provided pouch when not in use.
Is the NTG-1 repairable?
Yes, Rode offers repair services. Contact your local Rode distributor or authorized service center for assistance.
User questions about NTG-1 RODE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual NTG-1 - RODE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NTG-1 by RODE.