IXO 6 - Screwdriver BOSCH - Free user manual and instructions
Find the device manual for free IXO 6 BOSCH in PDF.
| Product type | Cordless screwdriver |
| Brand | Bosch |
| Model | IXO 6 |
| Rated voltage | 3.6 V |
| No-load speed | 0 – 215 min-1 |
| Maximum screw torque (hard/soft) according to ISO 5393 | 3.0 Nm / 4.5 Nm |
| Maximum screw diameter | 5 mm |
| Battery type | Integrated Lithium-Ion |
| Battery capacity | 1.5 Ah (5.4 Wh) |
| Maximum charge time | 3.5 h |
| Charge temperature range | 0 °C … +45 °C |
| Operating and storage temperature range | -20 °C … +50 °C |
| Weight according to EPTA Procedure 01:2014 | 0.3 kg |
| Sound pressure level | < 70 dB(A) |
| Vibrations (screwing) | ah = 2.5 m/s2, K = 1.5 m/s2 |
| Power supply | Lithium-Ion battery 3.6 V, charging via micro-USB |
| Main functions | Screwing and unscrewing, LED lighting, automatic spindle lock (Auto-Lock), charge level indicator, rotation direction selector |
| Compatible accessories | Offset chuck, angle attachment (optional) |
| Maintenance and cleaning | Clean ventilation slots, keep gripping surfaces clean |
| Safety | Electronic Cell Protection (ECP), automatic shutdown in case of deep discharge, insulation of gripping surfaces |
| Spare parts and repairability | Repair by a Bosch authorized service center; original spare parts available |
| General information | The battery is integrated; do not expose to water or temperatures > 130 °C; separate disposal according to EU regulations |
Frequently Asked Questions - IXO 6 BOSCH
User questions about IXO 6 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Screwdriver in PDF format for free! Find your manual IXO 6 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IXO 6 by BOSCH.
USER MANUAL IXO 6 BOSCH
German
Safety instructions
General Power Tool Safety Warnings
WARNING
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. ▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
Battery tool use and care
▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. ▶ Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. ▶ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. ▶ Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. ▶ Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. ▶ Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. ▶ Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Safety Warnings for Screwdrivers
▶ Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. ▶ Use suitable detectors to determine if there are hidden supply lines or contact the local utility company for assistance. Contact with electric cables can cause fire and electric shock. Damaging gas lines can lead to explosion. Breaking water pipes causes property damage. ▶ Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions. ▶ Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. ▶ Always wait until the power tool has come to a complete stop before placing it down. The application tool can jam and cause you to lose control of the power tool.
Protect the power tool against heat, e.g. against continuous intense sunlight, fire, water, and moisture.
There is a risk of explosion.
Safety instructions for power supply
This power supply is not intended for use by children or persons with physical, sensory or mental limitations or a lack of experience or knowledge. This power supply can be used by children aged 8 or older and by persons who have physical, sensory or mental limitations or a lack of experience or knowledge if a person responsible for their safety supervises them or has instructed them in the safe operation of the power supply and they understand the associated dangers. Otherwise, there is a risk of operating errors and injuries.
Do not expose the power supply to rain or wet conditions. Water entering the power supply will increase the risk of electric shock.
Keep the power supply clean. Dirt poses a risk of electric shock. Always check the power supply before use. Stop using the power supply if you discover any damage. Do not open the power supply yourself, and have it repaired only by a qualified specialist using only original replacement parts. Damaged power supplies increase the risk of electric shock.
Product Description and Specifications
Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury.
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The power tool is intended for screwing in and loosening screws.
Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) Screwdriver bit A) (2) Tool holder (3) Rubber cap (4) Battery charge indicator (5) Rotational direction switch (6) Hole for attaching strap (7) Charge contacts (8) On/off switch (9) Worklight (10) Handle (insulated gripping surface)
28 | English
(11) Micro USB port (12) Charging cable (13) Charger (14) Off-set angle adapter A) (15) Angle screw adapter A) (16) Unlocking ring A)
A) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.
Technical Data
| Cordless screwdriver IXO | ||
| Article number | 3 603 JC7 0.. | |
| Rated voltage V= 3.6 | ||
| No-load speed min | -1 | 0–215 |
| Max. torque, hard/soft screwdriving application according to ISO 5393 | Nm 3.0/4.5 | |
| Max. screw diameter mm 5 | ||
| Weight according to EPTA-Procedure 01:2014 | kg 0.3 | |
| Permitted ambient temperature | ||
| – during charging °C 0 ...+45 | ||
| – during operation A)B) and during storage | °C -20 ... +50 | |
| Battery Li-ion | ||
| Capacity Ah 1.5 | ||
| Energy Wh 5.4 | ||
| Number of battery cells 1 | ||
| Charger | ||
| Article number 2 609 120 713 (EU) | 2 609 120 718 (UK) | |
| 2 609 120 717 (AUS) | ||
Cordless screwdriver IXO
| max. charging time hrs 3.5 | |
| Protection class | ☐ / II |
| Charging cable | |
| Article number 1 607 000 CG9 | |
| Charging station | |
| Article number | 1 600 A01 B581 600 A01 AU1 |
A) Overheat protection stops the power tool at temperatures > +65 °C.
B) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power tool is less than 70 dB(A). The noise level when working can exceed the volume stated.
Wear hearing protection
Vibration total values a_h (triax vector sum) and uncertainty K determined according to EN 62841-2-2:
Screwdriving: a_h = 2.5 m/s², K = 1.5 m/s²
The vibration level and noise emission value given in these instructions have been measured in accordance with a standardised measuring procedure and may be used to compare power tools. They may also be used for a preliminary estimation of vibration and noise emissions.
The stated vibration level and noise emission value represent the main applications of the power tool. However, if the power tool is used for other applications, with different application tools or is poorly maintained, the vibration level and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total working period.
To estimate vibration and noise emissions accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. This may significantly reduce vibration and noise emissions over the total working period.
Implement additional safety measures to protect the operator from the effects of vibration, such as servicing the power tool and application tools, keeping their hands warm, and organising workflows correctly.
Assembly
Battery Charging (see figure A)
Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool. Note the mains voltage! The voltage of the power source must match the voltage specified on the rating plate of the charger. Chargers marked with 230 V can also be operated with 220 V.
Note: The battery is supplied partially charged. To ensure full battery capacity, fully charge the battery in the charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging process does not damage the battery. The lithium-ion battery is protected against deep discharge by the "Electronic Cell Protection (ECP)". When the battery is discharged, the power tool is switched off by means of a protective circuit: The application tool no longer rotates.
Do not continue to press the On/Off switch after the power tool has automatically switched off. The battery can be damaged.
Battery charge indicator during operation
The battery charge indicator (4) displays the state of charge of the battery when the power tool is switched on.
LED Capacity
| Continuous light 3 x green 60 – 100 % |
| Continuous light 2 x green 30 – 60 % |
| Continuous light 1 x green 10 – 30 % |
| Flashing light 3 x green 0 – 10 % |
The battery charge indicator shuts down after 30 seconds if the power tool is not running.
To charge the battery, plug the charging cable (12) into the port on the bottom of the handle and into the charger (13). Then plug the mains cable of the charger (13) into the mains socket.
Battery charge indicator during charging
The battery charge indicator (4) indicates the charging progress. During the charging procedure, the indicator flashes.
LED Capacity
Slowly flashing light 1 x green 0 - 30 %
Slowly flashing light 2 x green: 30 - 60 %
Slowly flashing light 3 x green: 60 - 100 %
Continuous light 3 x green: 100 %
During the charging process, the handle of the power tool will heat up. This is normal. If you are not planning to use the power tool again soon, disconnect the charger from the mains. The power tool cannot be used during the charging process. It is not defective if it does not work during the charging process. Follow the instructions on correct disposal.
Protect the charger against moisture.
The battery charge indicator shuts down after 30 seconds if the power tool is not running.
Changing the tool (see figure B)
Do not use two-sided screwdriver bits that are longer than 25 mm. Insert the screwdriver bit (1) directly into the tool holder (2).
Off-Set Angle Adapter/Angle Screw Adapter (see figures C - F)
Note: The power tool is not intended for use with the grass shears attachment (1 600 A00 10D).
You can drive in screws close to edges using the off-set angle adapter (14). The angle screw adapter (15) allows you to drive in screws in hard-to-reach areas.
Assembly (see figures C - D)
To fit the adapters, pull off the rubber cap (3) towards you. Then the adapters can be attached. The attachments can be mounted offset by 45° respectively.
Removal (see figures E - F)
To remove the attachments, turn the unlocking ring (16) in the rotational direction ① and pull the adapter off towards you. Then reattach the rubber cap (3).
32 | English
Operation
Starting Operation
Setting the rotational direction
The rotational direction switch (5) is used to change the rotational direction of the power tool. However, this is not possible while the on/off switch (8) is being pressed.
Do not use the rotational direction switch (5) when the power tool is in operation, as this may damage it.
Clockwise rotation: To drive in screws, slide the rotational direction switch (5) forward to the stop.
Anti-clockwise rotation: To loosen or unscrew screws, slide the rotational direction switch (5) backwards.
Switching on/off
To start the power tool, press and hold the on/off switch (8).
The worklight (9) lights up when the on/off switch (8) is lightly or fully pressed, allowing the work area to be illuminated in poor lighting conditions.
To switch off the power tool, release the on/off switch (8).
Adjusting the Speed
You can adjust the speed of the power tool by pressing in the on/off switch (8) to varying extents.
A light pressure on the on/off switch (8) results in a low rotational speed. Increased pressure on the switch causes an increase in speed.
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder, are locked when the on/off switch (8) is not pressed.
This allows screws to be driven in even when the battery is discharged and enables the power tool to be used as a screwdriver.
If the drill spindle is blocked, do not press the on/off switch (8) for longer than 15 seconds. Otherwise, the power tool may become damaged.
Practical advice
Only apply the power tool to the screw/nut when the tool is switched off. Rotating tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorised to repair Bosch power tools.
After-sales service and advice on using products
Our after-sales service can answer questions concerning product maintenance and repair, as well as spare parts. You can find exploded drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
34 | English
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng - BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN - BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape - BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
For the region: Russia, Belarus, Kazakhstan, Ukraine
Warranty service and repair of power tools, in compliance with the requirements and standards of the manufacturer, are carried out in the territory of all countries only at Robert Bosch branded or authorized service centers. WARNING! The use of counterfeit products is dangerous to use, may cause damage to your health. The manufacture and distribution of counterfeit goods is prosecuted under the Law in administrative and criminal cases.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the nameplate of the product.
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable for road-transport by the user without further restrictions.
When shipping by third parties (e.g.: by air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
36 | English
Disposal
The machine, rechargeable batteries, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into household waste!
Only for EU countries:
According to Directive 2012/19/EU, power tools that are no longer usable, and according to Directive 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see "Transport", page 35).
Integrated batteries may only be removed for disposal by qualified personnel. Opening the housing shell can destroy the power tool.
Before you can remove the battery from the power tool, you will need to use the power tool until the battery is completely discharged. Unscrew the screws on the housing and remove the housing shell in order to remove the battery. To prevent a short circuit, disconnect the connectors on the battery one at a time and then isolate the poles. Even when fully discharged, the battery still contains a residual capacity which can be released in case of a short circuit.
Transport
Bosch Service Center
Telegrafvej 3
2750 Ballerup
Denmark
Tel.: (08) 7501820 (in Sweden)
Fax: (011) 187691
Transport
1 600 A00 1YA
1 600 A00 1Y8
1 600 A01 PW2
CE
|
| de | EU-Konformitätserklärung | Wir erklären in alleiniger Verantwortung, dass die genannten Produkte allen einschlägigen Bestimmungen der nachfolgend aufgeführten Richtlinien und Verordnungen entsprechen und mit folgenden Normen übereinstimmen.Technische Unterlagen bei: * | |
| Akku-Schrauber | Sachnum-mer | ||
| en | EU Declaration of Con-formity | We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards.Technical file at: * | |
| Cordless Screwdriver | Article num-ber | ||
| fr | Déclaration de conformité UE | Nous déclarons sous notre propre responsabilité que les produits décrits sont en conformité avec les directives, règlements normatifs et normes énumérés ci-dessous.Dossier technique auprès de : * | |
| Visseuse sans fil | N° d'article | ||
| es | Declaración de conformidad UE | Declaramos bajo nuestra exclusiva responsabilidad, que los productos nombrados cumplen con todas las disposiciones correspondientes de las Directivas y los Reglamentos mencionados a continuación y están en conformidad con las siguientes normas.Documentos técnicos de: * | |
| Atornilla-dora accionada por acumula-dor | N° de articulo | ||
| pt | Declaração de Confor-midade UE | Declaramos sob nossa exclusiva responsabilidade que os produtos mencionados cumprem todas as disposições e os regula-mentos indicados e estão em conformidade com as seguintes normas.Documentação técnica pertencente à: * | |
| Aparafusadora sem fio | N.° do produ-to | ||
| it | Dichiarazione di conformità UE | Dichiariamo sotto la nostra responsabilità che i prodotti indicati sono conformi a tutte le disposizioni pertinenti delle Diretti- | |
| II | CE | ||
| Avvitato-re a batte-ria | Codice pro-dotto | ve e dei Regolamenti elencati di seguito,nonché alle seguenti Normative.Documentazione Tecnica presso: * | |
| nl | EU-conformiteitsver-klaring | Wij verklaren op eigen verantwoordelijkheiddat de genoemde producten voldoen aan al-le desbetreffende bepalingen van de hierna genoemde richtlijnen en verordeningen en overeenstemmen met de volgende normen.Technisch dossier bij: * | |
| Accu-schroe-vendraai-er | Productnum-mer | ||
| da | EU-overensstemmelse-serklæring | Vi erklærer som eneansvarlige, at det bes-krevne produkt er i overensstemmelse medalle gældende bestemmelser i følgende di-rektiver og forordninger og opfylder følgen-de standarder.Tekniske bilag ved: * | |
| Akku-skrue-trækker | Typenummer | ||
| sv | EU-konformitetsförkla-ring | Vi förklarar under eget ansvar att denämnda produkterna uppfyller kraven i allagällande bestämmelser i de nedan angivna direktiven och förordningarnas och att de stämmer överens med följande normer.Teknisk dokumentation: * | |
| Sladdlös skruvdra-gare | Produktnum-mer | ||
| no | EU-samsvarserklæring | Vi erklærer under eneansvar at de nevnteproduktene er i overensstemmelse med allerelevante bestemmelser i direktivene og fo-rordningene nedenfor og med følgende standarder.Teknisk dokumentasjon hos: * | |
| Akku-skrutrek-ker | Produktnum-mer | ||
| fi | EU-vaatimustenmukai-suusvakuutus | Vakuutamme täten, että mainitut tuotteet vastaavat kaikkia seuraavien direktiivien jaasetusten asiaankuuluvia vaatimuksia jaovat seuraavien standardien vaatimusten mukaisia.Tekniset asiakirjat saatavana: * | |
| Akkuruu-vinvään-nin | Tuotenum-ro | ||
| el | Δήλωση πιστότητας ΕΕ | Δηλώνουμε με αποκλειστική μας ευθύνη, ότιτα αναφερόμενα προϊόντα αντιστοιχούν σεόλες τις σχετικές διατάξεις των πιο κάτω | |
CE
III
| Δραπανοκατσάβιδομπαταρίας | Αριθμόςευρετηρίου | αναφερόμενων οδηγιών και κανονισμών και ταυτίζονται με τα ακόλουθα πρότυπα.Τεχνικά έγγραφα στη:* | |
| tr | AB Uygunluk beyanı | Tek sorumlu olarak, tanımlanan ürününaşağıdaki yönetmelik ve direktiflerin geçerlibütün hükümlerine ve aşağıdaki standartla-ra uygun olduğunu beyan ederiz.Teknik belgelerin bulunduğu yer:* | |
| Akülü vi-dalamamakinesi | Ürün kodu | ||
| pl | Deklaracja zgodnościUE | Oświadczamy z pełną odpowiedzialnością,że niniejsze produkty odpowiadają wszyst-kim wymaganiom poniżej wyszczegół-nionych dyrektyw i rozporządzeń, oraz że są zgodne z następującymi normami.Dokumentacja techniczna:* | |
| Wkrętar-kaakumula-torowa | Numer kata-logowy | ||
| cs | EU prohlášení oshodě | Prohlašujeme na výhradní zodpovědnost,že uvedený výrobek splňuje všechna příslušná ustanovení níže uvedených směrnic anařízení aje vsouladu snásledujícími nor-mami:Technické podklady u:* | |
| Aku-mulátoro-výšroubovák | Objednacíčíslo | ||
| sk | EÚ vyhlásenie ozhode | Vyhlasujeme na výhradní zodpovednosť, že uvedený výrobok splňa všetky príslušné ustanovenia nižšie uvedených smerníc ana-riadení aje vsúlade snasledujúcimi norma-mi:Technické podklady má spoločnosť:* | |
| Aku-mulátoro-výskrutko-vač | Vecné číslo | ||
| hu | EU konformitási nyilat-kozat | Egyedüli felelőséggel kijelentjük, hogy a megnevezett termékek megfelelnek az aláb-biakban felsorolásra kerülő irányelvek és rendeletek valamennyi idevágó előírásainak és megfelelnek a következő szabványoknak.Műszaki dokumentumok megőrzési pontja:* | |
| Akku-mulátoroscsavaro-zógép | Cikkszám | ||
| ru | Заявление осоответствии ЕС | Мы заявляем под нашу единоличнуюответственность, что названныепродукты соответствуют всем | |
| IV | CE | ||
| Аккумуля торный шурупове рт | Товарный No | действующим предписаниямнижеуказанных директив ираспоряжений, а также нижеуказанныхнорм.Техническая документация хранится y: * | |
| uk | Заява про відповідність ЄС | Мизаявляємо під нашу одноособовувідповідальність, що названі виробивідповідають усім чинним положеннямнищеозначених директив ірозпоряджень, а також нижчеозначенимнормам.Технічна документація зберігається y: * | |
| Акумуляторний шурупове рт | Товарний номер | ||
| kk | ЕО сәйкестік мағлүмдамасы | Өз жауапкершілікпен біз аталған өнімдертөменде жзылған директикалар менжарлықтардың тиісті қағидаларынасәйкестігін және төмендегі нормаларғасай екенін білдіреміз.Техникалық құжаттар: * | |
| Аккумуля торлы бурауыш | Өнім нөмірі | ||
| ro | Declarație de conformitate UE | Declarăm pe proprie răspundere că produsele mentionate corespund tuturor dispozițiilor relevante ale directivelor și reglementărilor enumerate în cele ce urmează șisunt în conformitate cu următoarele standarde.Documentație tehnică la: * | |
| Maşină de găurit și înșuru-bat cu acumulator | Număr de identificare | ||
| bg | ЕС декларация за съответствие | С пълна отговорност ние декларираме, чепосочените продукти отговарят на всичкивалидни изисквания на директивите иразпоредбите по-долу и съответства на следните стандарти.Техническа документация при: * | |
| Акумулат орен винтовер т | Каталожен номер | ||
| mk | EU-Изјава за сообразност | Со целосна одговорност изјавуваме, дека опишаните производи се во согласностсо сите релевантни одредби на следнитерегулативи и прописи и се во согласност | |
CE
V
| Батериски одвртува ч | Број на дел/ артикл | со следните норми.Техничка документација кај: * | |
| sr | EU-izjava o usaglašenosti | Na sopstvenu odgovornost izjavljujemo, da navedeni proizvodi odgovaraju svim dotičnim odredbama naknadno navedenih smer-nica u uredaba i da su u skladu sa sledećim standardima.Tehnička dokumentacija kod: * | |
| Akku-od-vrtač | Broj predme-ta | ||
| sl | Izjava o skladnosti EU | Izjavljamo pod izključno odgovornostjo, da je omenjen izdelek v skladu z vsemi rele-vantnimi določili direktiv in uredb ter ustre-za naslednjim standardom.Tehnična dokumentacija pri: * | |
| Akumula-torski vijačnik | Številka arti-kla | ||
| hr | EU izjava o sukladnosti | Pod punom odgovornošću izjavljujemo da navedeni proizvodi odgovaraju svim rele-vantnim odredbama direktiva i propisima navedenima u nastavku i da su sukladni sa sljedećim normama.Tehnička dokumentacija se može dobiti kod: * | |
| Aku-odvi-jač | Kataloški br. | ||
| et | EL-vastavusdeklarat-sioon | Kinnitame ainuvastutajatena, et nimetatud tooted vastavad järgnevalt loetletud direk-tiivide ja määruste köikidele asjaomastele nõuetele ja on kooskõlas järgmiste normide-ga.Tehnilised dokumendid saadaval: * | |
| Aku-kruvi-keeraja | Tootenumber | ||
| lv | Deklarācija par atbilsti-buES standartiem | Mēs ar pilnu atbildību paziņojam, ka šeit aplūkotie izstrādājumi atbilst visiem tālāk minētajās direktīvās un rīkojumos ietverta-jām saistošajām nostādnēm, kā arī seko-jošiem standartiem.Tehniskā dokumentācija no: * | |
| Akumula-tora skrūvgrie-zis | Izstrādājuma numurs | ||
| IT | ES atitikties deklaracija | Atsakingai pareiškiame, kad išvardyti gaminiai atitinka visus privalomus žemiau nurodytu direktyvų ir reglamentų reikalavimus ir šiuos standartus.Techninė dokumentacija saugoma:* | ||
| Akumuliatorinis suktuvas | Gaminio numeris | |||
| IXO 3 603 | JC70.. | 2006/42/EC2014/30/EU2011/65/EU | EN 62841-1:2015EN 62841-2-2:2014EN 55014-1:2006+A1:2009+A2:2011EN 55014-2:2015EN 50581:2012 | |
| BOSCH | * Robert Bosch Power Tools GmbH(PT/ECS)70538 StuttgartGERMANY | |||
| Henk BeckerChairman of Executive Management | Helmut HeinzelmannHead of Product Certification | |||
| Robert Bosch Power Tools GmbH, 70538 Stuttgart, GERMANYStuttgart, 04.04.2019 | ||||
- GERMAN
- SAFETY INSTRUCTIONS
- GENERAL POWER TOOL SAFETY WARNINGS
- WARNING
- SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
- KEEP WORK AREA CLEAN AND WELL LIT. CLUTTERED OR DARK AREAS INVITE ACCIDENTS
- ELECTRICAL SAFETY
- PERSONAL SAFETY
- POWER TOOL USE AND CARE
- BATTERY TOOL USE AND CARE
- SERVICE
- SAFETY WARNINGS FOR SCREWDRIVERS
- SAFETY INSTRUCTIONS FOR POWER SUPPLY
- PRODUCT DESCRIPTION AND SPECIFICATIONS
- INTENDED USE
- PRODUCT FEATURES
- ENGLISH
- NOISE/VIBRATION INFORMATION
- WEAR HEARING PROTECTION
- ASSEMBLY
- BATTERY CHARGING (SEE FIGURE A)
- BATTERY CHARGE INDICATOR DURING OPERATION
- BATTERY CHARGE INDICATOR DURING CHARGING
- LED CAPACITY
- PROTECT THE CHARGER AGAINST MOISTURE
- CHANGING THE TOOL (SEE FIGURE B)
- OFF-SET ANGLE ADAPTER/ANGLE SCREW ADAPTER (SEE FIGURES C - F)
- ASSEMBLY (SEE FIGURES C - D)
- REMOVAL (SEE FIGURES E - F)
- OPERATION
- STARTING OPERATION
- SETTING THE ROTATIONAL DIRECTION
- SWITCHING ON/OFF
- ADJUSTING THE SPEED
- FULLY AUTOMATIC SPINDLE LOCK (AUTO-LOCK)
- PRACTICAL ADVICE
- MAINTENANCE AND SERVICE
- MAINTENANCE AND CLEANING
- AFTER-SALES SERVICE AND ADVICE ON USING PRODUCTS
- GREAT BRITAIN
- IRELAND
- AUSTRALIA, NEW ZEALAND AND PACIFIC ISLANDS
- REPUBLIC OF SOUTH AFRICA
- CUSTOMER SERVICE
- GAUTENG - BSC SERVICE CENTRE
- KZN - BSC SERVICE CENTRE
- WESTERN CAPE - BSC SERVICE CENTRE
- BOSCH HEADQUARTERS
- FOR THE REGION: RUSSIA, BELARUS, KAZAKHSTAN, UKRAINE
- TRANSPORT
- DISPOSAL
- ONLY FOR EU COUNTRIES
- BATTERY PACKS/BATTERIES
- LI-ION
- CE
- III
- V
Brand : BOSCH
Model : IXO 6
Category : Screwdriver