SKB510F1AS - Refrigerator ZANUSSI - Free user manual and instructions

Product Type	Refrigerator with freezer compartment
Brand	Zanussi
Model	SKB510F1AS
Total Net Capacity	510 L
Refrigerator Net Capacity	360 L
Freezer Net Capacity	150 L
Energy Efficiency Class	A+
Annual Energy Consumption	280 kWh
Climate Class	SN-ST
Noise Level	42 dB(A)
Defrost System	Frost free (No Frost)
Control Type	Electronic with LED display
Temperature Control	Separate for fridge and freezer
Shelves Material	Safety glass
Number of Shelves	4 adjustable shelves in fridge
Door Bins	3 door bins in fridge, 2 in freezer
Ice Maker	Manual ice cube tray
Power Supply	220-240 V, 50 Hz
Rated Current	1.2 A
Overall Dimensions (HxWxD)	185 x 60 x 65 cm
Net Weight	70 kg
Reversible Door	Yes
Refrigerant	R600a
Spare Parts Availability	At least 7 years after purchase
Repairability Index	8.4 / 10

Frequently Asked Questions - SKB510F1AS ZANUSSI

How do I adjust the temperature on my Zanussi SKB510F1AS refrigerator?

Use the electronic control panel on the front of the appliance. Press the Fridge or Freezer button to adjust the temperature in steps. The recommended temperature is 4°C for the fridge and -18°C for the freezer.

What should I do if the refrigerator is not cooling properly?

First, check that the appliance is plugged in and the power is on. Ensure the temperature settings are correct. Verify that the door seals are clean and intact. If the problem persists, check for blocked air vents inside the fridge. If it still fails, contact customer support.

How often should I defrost the freezer?

Your Zanussi SKB510F1AS is equipped with No Frost technology, which automatically prevents ice buildup, so manual defrosting is not required. However, if you notice excessive ice, ensure the door is closing properly and the seal is clean.

Can I reverse the door opening direction?

Yes, the door is reversible. Refer to the user manual for detailed instructions. You will need to reposition the hinges and door handles. It is recommended to have two people for this task.

What is the recommended temperature for storing fruits and vegetables?

For optimal freshness, store fruits and vegetables in the crisper drawer at around 4-5°C. Keep them separate to avoid ethylene gas affecting sensitive produce.

How do I clean the interior of the refrigerator?

Unplug the appliance first. Remove all food and shelves. Clean the interior with a soft cloth and a solution of warm water and mild detergent. Avoid abrasive cleaners. Rinse and dry thoroughly before placing food back. Clean the door seals with a damp cloth.

Why is there water at the bottom of the fridge?

Check the defrost drain hole at the back of the fridge interior. It may be blocked. Clean it with a cotton swab or a pipe cleaner. Also ensure the water collection tray is properly positioned.

What should I do if the alarm is sounding?

The audible alarm may indicate a door left open for too long or a temperature rise. Check that both doors are closed properly. If the alarm continues, check the temperature display for error codes and consult the manual.

Is it normal for the refrigerator to make noise?

Some noises are normal: a humming from the compressor, a gurgling from refrigerant flow, and occasional clicking from the thermostat. However, loud or repetitive sounds may indicate an issue; check for loose parts or contact service.

How long will the food stay cold during a power outage?

In case of a power failure, the insulation keeps food cold for several hours. Avoid opening the doors. A fully loaded fridge can stay cold for about 4-6 hours, and a freezer for up to 24 hours if unopened.

USER MANUAL SKB510F1AS ZANUSSI

TABLE OF CONTENTS

1. ABOUT SAFETY....2
2. SAFETY INSTRUCTIONS....4
3. INSTALLATION....6
4. CONTROL PANEL 8
5. DAILY USE....9
6. ADVICE AND TIPS....9
7. MAINTENANCE AND CLEANING.... 10
8. TROUBLESHOOTING....11
9. NOISE....14
10. TECHNICAL DATA.... 14
11. INFORMATION FOR TEST INSTITUTES....14

FOR PERFECT RESULTS

5.2 Movable shelves

8. TROUBLESHOOTING

WARNING!

1. SAFETY INFORMATION......16
2. SAFETY INSTRUCTIONS....18
3. INSTALLATION....20
4. CONTROL PANEL....22
5. DAILY USE....23
6. HINTS AND TIPS....23
7. CARE AND CLEANING....24
8. TROUBLESHOOTING....25
9. NOISES....28
10. TECHNICAL DATA....28
11. INFORMATION FOR TEST INSTITUTES....29

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

⚠ Warning / Caution-Safety information

i General information and tips

Environmental information

Subject to change without notice.

1. ⚠️ SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or

usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
• This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Do not let children play with the appliance. Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• Keep all packaging away from children and dispose of it appropriately.

1.2 General Safety

This appliance is intended to be used in household and similar applications such as:

Farm houses; staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels, bed and breakfast and other residential type environments.

To avoid contamination of food respect the following instructions:

Do not open the door for long periods; clean regularly surfaces that can come in contact with food and accessible drainage systems;

Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

- WARNING: Do not damage the refrigerant circuit.

- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

- Do not use water spray or steam to clean the appliance.

- Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents, or metal objects.

- When the appliance is empty for a long period, switch it off, defrost, clean, dry, and leave the door open to prevent mould from developing within the appliance.

- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre, or similarly qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must install this appliance.

- Remove all the packaging.

- Do not install or use a damaged appliance.

- Do not use the appliance before installing it in the built-in structure due to safety reasons.

- Follow the installation instructions supplied with the appliance.

• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

- Make sure the air can circulate around the appliance.

- At first installation or after reversing the door, wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.

• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
• Do not install the appliance close to radiators or cookers, ovens or hobs.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too cold.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.
• The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately.

2.2 Electrical connection

WARNING!

Risk of fire and electric shock.

WARNING!

When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING!

Do not use multi-plug adapters and extension cables.

• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is

access to the mains plug after the installation.

- Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

2.3 Use

WARNING!

Risk of injury, burns, electric shock or fire.

The appliance contains flammable isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.

• Do not change the specification of this appliance.
• Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items touch the plastic parts of the appliance.
• Do not store flammable gas and liquid in the appliance.
• Do not put flammable products or items that are wet with flammable products in, near, or on the appliance.
• Do not touch the compressor or the condenser. They are hot.

2.4 Internal lighting

WARNING!

Risk of electric shock.

The type of lamp used for this appliance is for household appliances only. Do not use it for house lighting.

2.5 Care and cleaning

WARNING!

Risk of injury or damage to the appliance.

• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

2.6 Service

• To repair the appliance, contact the Authorised Service Centre. Use only original spare parts.
• Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts

3. INSTALLATION

WARNING!

Refer to Safety chapters.

WARNING!

Refer to the installation instruction document to install your appliance.

are only available to professional repairers, and that not all spare parts are relevant for all models.

- Door gaskets will be available for 10 years after the model has been discontinued.

2.7 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets from being closed inside the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.

WARNING!

Fix the appliance in accordance with the installation instruction document to avoid a risk of instability of the appliance.

3.1 Dimensions

Overall dimensions1)

H 1 mm 1021

W 1 mm 548

D 1 mm 549

1) The height, width, and depth of the appliance without the handle and feet.

Space required in use1)

H 2 (A+B) mm 1066

W 2 mm 548

D 2 mm 551

A mm 1030

Space required in use ¹⁾

B mm 36

1) The height, width, and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air.

Overall space required in use ¹⁾

H 3 (A+B) mm 1066

W 3 mm 548

D 3 mm 1071

1) The height, width, and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment.

3.2 Location

To ensure the appliance's best functionality, you should not install it near a heat source (oven, stoves, radiators, cookers or hobs) or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet.

3.3 Positioning

This appliance should be installed in a dry, well-ventilated indoor position.

This appliance is intended to be used at ambient temperatures ranging from 10°C to 38°C.

If you have any doubts regarding where to install the appliance, please turn to the vendor, our customer service, or the nearest Authorised Service Centre.

It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.

3.4 Electrical connection

- Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.

- The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with

4. CONTROL PANEL

4.1 Switching on

1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise to a medium setting.

current regulations, consulting a qualified electrician.

• The manufacturer declines all responsibility if the above safety precautions are not observed.
• This appliance complies with the E.E.C. Directives.

3.5 Ventilation requirements

The airflow behind the appliance must be sufficient.

CAUTION!

Refer to the installation instructions for the installation.

3.6 Door reversibility

Please refer to the separate document with instructions on installation and door reversal.

CAUTION!

At every stage of reversing the door protect the floor from scratching with a durable material.

4.2 Switching off

To turn off the appliance, turn the temperature regulator to the "O" position.

4.3 Temperature regulation

The temperature is regulated automatically. However, you can set a temperature inside the appliance yourself.

Choose the setting keeping in mind that the temperature inside the appliance depends on:

• room temperature, • frequency of opening the door, • quantity of food stored,

5. DAILY USE

5.1 Positioning the door shelves

To permit storage of food packages of various sizes, the door shelves can be placed at different heights.

1. Gradually pull the shelf up until it comes free.
2. Reposition as required.

5.2 Movable shelves

The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

6. HINTS AND TIPS

6.1 Hints for energy saving

- Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly

- appliance location. A medium setting is generally the most suitable one.

To operate the appliance:

1. Turn the temperature regulator clockwise to obtain a lower temperature inside the appliance.
2. Turn the temperature regulator counterclockwise to obtain a higher temperature inside the appliance.

Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.

5.3 Vegetable drawer

There is a special drawer in the bottom part of the appliance suitable for storage of fruits and vegetables.

distributed. Position of the door bins does not affect energy consumption.

• Do not open the door frequently or leave it open longer than necessary.
• Do not set too high temperature to save energy unless it is required by the characteristics of the food.
• If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
• Ensure a good ventilation. Do not cover the ventilation grilles or holes.

6.2 Hints for fresh food refrigeration

• The medium temperature setting ensures good preservation of fresh food. Higher temperature setting inside the appliance may lead to shorter shelf life of food.
• Cover the food with packaging to preserve its freshness and aroma. Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
• To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
• It is recommended to defrost the food inside the fridge.
• Do not insert hot food inside the appliance. Make sure it has cooled

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 Cleaning the interior

Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dried thoroughly.

down at room temperature before inserting it.

- To prevent food waste the new stock of food should always be placed behind the old one.

6.3 Hints for food refrigeration

• Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
• Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
• It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator. • Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
• Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
• Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack. • Always refer to the expiry date of the products to know how long to keep them.

CAUTION!

Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.

CAUTION!

The accessories and parts of the appliance are not suitable for washing in a dishwasher.

7.2 Periodic cleaning

The equipment has to be cleaned regularly:

1. Clean the inside and accessories with lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.

7.3 Defrosting of the refrigerator

Frost is automatically eliminated from the evaporator of the refrigerator compartment during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.

It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside.

For this purpose use the tube cleaner provided with the appliance.

7.4 Period of non-operation

When the appliance is not in use for long period, take the following precautions:

1. Disconnect the appliance from electricity supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door open to prevent unpleasant smells.

8. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Solution
The appliance does not operate.	The appliance is switched off.	Switch on the appliance.
The mains plug is not connected to the mains socket correctly.		Connect the mains plug to the mains socket correctly.
There is no voltage in the mains socket.		Connect a different electrical appliance to the mains socket. Contact a qualified electrician.
The appliance is noisy. The appliance is not supported properly.		Check if the appliance stands stable.
The compressor operates continually.	Temperature is set incorrectly.	Refer to "Control Panel" chapter.
Many food products were put in at the same time.		Wait a few hours and then check the temperature again.
The room temperature is too high.		Refer to "Installation" chapter.
Food products placed in the appliance were too warm.		Allow food products to cool to room temperature before storing.
The door is not closed correctly.		Refer to "Closing the door" section.
Door is misaligned or interferes with ventilation grill.	The appliance is not level-led.	Refer to installation instructions.
Door does not open easily. You attempted to re-open the door immediately after closing.		Wait a few seconds between closing and re-opening of the door.
The lamp does not work. The lamp is in stand-by mode.		Close and open the door.
	The lamp is defective. Refer to "Replacing the lamp" section.
There is too much frost and ice.	The door is not closed correctly.	Refer to "Closing the door" section.
The gasket is deformed or dirty.		Refer to "Closing the door" section.
Food products are not wrapped properly.		Wrap the food products better.
Temperature is set incorrectly.		Refer to "Control Panel" chapter.
Appliance is fully loaded and is set to the lowest temperature.		Set a higher temperature. Refer to "Control Panel" chapter.
Temperature set in the appliance is too low and the ambient temperature is too high.		Set a higher temperature. Refer to "Control Panel" chapter.
Water flows on the rear plate of the refrigerator.	During the automatic defrosting process, frost melts on the rear plate.	This is correct.
There is too much condensed water on the rear wall of the refrigerator.	Door was opened too frequently.	Open the door only when necessary.
Door was not closed completely.		Make sure the door is closed completely.
Stored food was not wrapped.		Wrap food in suitable packaging before storing it in the appliance.
Water flows inside the refrigerator.	Food products prevent the water from flowing into the water collector.	Make sure that food products do not touch the rear plate.
The water outlet is clogged. Clean the water outlet.
Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor.		Attach the melting water outlet to the evaporative tray.
The temperature in the appliance is too low/too high.	The temperature is not set correctly.	Set a higher/lower temperature.
The door is not closed correctly.		Refer to "Closing the door" section.
The food products' temperature is too high.		Let the food products temperature decrease to room temperature before storage.
Many food products are stored at the same time.		Store less food products at the same time.
The door has been opened often.		Open the door only if necessary.
	There is no cold air circulation in the appliance.	Make sure that there is cold air circulation in the appliance. Refer to "Hints and Tips" chapter.

If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

8.2 Replacing the lamp

The appliance is equipped with a long-life LED interior light.

It is strongly recommended to use original spare parts only.

Use LED bulbs (E14 base) only. The maximum power is shown on the lamp unit.

CAUTION!

Disconnect the plug from the mains socket.

1. Using a screwdriver, remove the screw from the lamp cover.
2. Detach the lamp cover in the direction of the arrows.

1. Replace the bulb with one that has identical characteristics and is specifically designed for household appliances.
2. Reassemble the lamp cover.
3. Tighten the screw to the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door. Make sure that the light switches on.

8.3 Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to the installation instructions.
3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.

9. NOISES

10. TECHNICAL DATA

The technical information is located on the rating plate on the internal side of the appliance and on the energy label.

The QR code on the energy label supplied with the appliance

provides a web link to the information related to the performance of the appliance in the EU EPREL database.

Keep the energy label for reference together with the user manual and all

other documents provided with this appliance.

It is also possible to find the same information in EPREL using the link

https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.

11. INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances

shall be as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.

12. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of

appliances marked with the symbol 📁 with the household waste. Return the product to your local recycling facility or contact your municipal office.

1. SAFETY INSTRUCTIONS....32
2. INSTALLATION....34
3. CONTROL PANEL.... 36
4. DAILY USE....37
5. ADVICE AND TIPS....37
6. CARE AND CLEANING....38
7. TROUBLESHOOTING....39
8. NOISE....42
9. TECHNICAL DATA....42
10. INFORMATION FOR TESTING INSTITUTES....42

FOR PERFECT RESULTS

repair information:

www.aeg.com/support

3.5 Ventilation requirements

5.2 Removable shelves

8. TROUBLESHOOTING

WARNING!