Archer VR600v - Router TP-LINK - Free user manual and instructions

Product type	DSL/WiFi modem router
Brand	TP-Link
Model	Archer VR600v
Connectivity	VDSL2/ADSL2+, Gigabit Ethernet, dual-band AC WiFi
WiFi standards	IEEE 802.11a/b/g/n/ac
Max WiFi speed	Up to 600 Mbps (2.4 GHz + 5 GHz)
Ports	1 DSL port, 1 Gigabit WAN port, 4 Gigabit LAN ports, 2 RJ11 phone ports
VoIP functions	2 phone jacks for VoIP service
Power supply	12V/1A power adapter
Dimensions (L x D x H)	Approximately 200 x 130 x 35 mm
Weight	Approximately 340 g
Operating temperature	0°C to 40°C
Operating humidity	10% to 90% RH (non-condensing)
Security	WPA/WPA2-PSK, SPI firewall, MAC filtering
Management	Web interface (http://tplinkmodem.net), Tether app
LED indicators	Power, DSL, Internet, WLAN, LAN 1-4, Telephone 1-2, WPS
Maintenance and cleaning	Unplug before cleaning; use a soft dry cloth. Do not use chemicals.
Safety instructions	Keep away from water, fire, humidity or any heat source. Do not disassemble or repair yourself.
Spare parts and repairability	Not applicable (device not user-repairable). Contact technical support.

Frequently Asked Questions - Archer VR600v TP-LINK

How to access the router's administration interface?

Open a browser and type http://tplinkmodem.net or 192.168.1.1. Create a password or use admin as the username and password.

What to do if the authentication page does not appear?

Check that the computer receives an IP address automatically. Make sure you correctly type http://tplinkmodem.net. Try another browser or restart the router.

How to reset the router to factory settings?

With the router powered on, press and hold the RESET button until the LEDs flash, then release. You can also do it from the admin interface: System Administration > Restore.

I forgot the Wi-Fi password, how to find it?

The default password is printed on the label under the router. If it has been changed, log in to the admin interface and go to Wi-Fi or Wireless to view or change the password.

The DSL or Power LEDs do not light up normally, what to do?

Check the connections (telephone cable and power). If the problem persists, reset the router. Remove the DSL filter and connect directly. Contact your ISP if nothing works.

How to configure the router in modem-only mode?

Connect the Ethernet cable from your existing modem to the WAN port of the router. Access the interface, then WAN > WAN Configuration to change the physical WAN type.

Can I use the Tether app to manage the router?

Yes, the Tether app from TP-Link allows you to easily manage the router from a smartphone. Scan the QR code on the package to download it. Note that some models are not compatible.

How to install the router for the first time?

Plug the telephone cable into the DSL port, then the power adapter. Wait 2 minutes for the Power and DSL LEDs to be solid. Log in to the interface and follow the Quick Setup.

What to do if I cannot access the Internet?

Check the connections. Log in to the interface and make sure the VCI/VPI (or VLAN) settings, connection type, username and password provided by your ISP are correct. Restart or reset the router if necessary.

Is the router compatible with existing boxes?

Yes, you can use the Archer VR600v in WiFi Router mode behind an existing modem. Connect the Ethernet cable from the modem to the router's WAN port and configure the WAN connection type accordingly.

USER MANUAL Archer VR600v TP-LINK

Wireless DSL Modem Router

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support.

© 2024 TP-Link 7106511773 REV1.5.3

CONTENTS

1 / Deutsch 6 / English 11 / Español 16 / Ελληνικά 22 / Français 27 / Italiano 32 / Português 37 / Suomi 42 / Svenska 47 / Nederlands 52 / Norsk 57 / Dansk

Hardware installation

Connect the Hardware

If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection.

* Image may differ from actual product.

4 Wait for 2 minutes. The Power and DSL LEDs will be on and stable. If there is only one LED, it will flash slowly instead.

Note: If the LED status is different, please refer to FAQ > Q2.

Configure via Web Browser

1 Connecting your computer to the modem router via a wired or wireless connection

Wired

Connect your computer to the LAN (or 1/2/3/4) port using an Ethernet cable.

Wireless

Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router.

2 Configuring the modem router via a web browser

A Launch a web browser and type in

http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B Create a password for future login attempts, or use admin for both username and password for some routers.

C Go to Quick Setup or Quick Start page and follow the step-by-step instructions to complete the initial configuration.

Now you can enjoy your internet.

Already Have a Modem?

If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below and set up.

1 Connect your computer to the router (LAN 1/2/3 port) via a wired or wireless connection.

Note: The SSIDs (network names) and wireless password are printed on the product label.

2 Configuring the modem router via a web browser

A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

http://tplinkmodem.net

B Create a password for future login attempts, or use admin for both username and password for some routers.

3 Connect the modem to the router's WAN port via an Ethernet cable.

4 Go to WAN > WAN Configuration to change WAN PHYSICAL TYPE and finish the setup.

Now you can enjoy your internet. For more advanced settings, refer to the User Guide on TP-Link's official website at www.tp-link.com.

Tether App

The TP-Link Tether app provides a simple, intuitive way to access and manage your router. You can block unwelcome devices, set up Parental Controls, configure your wireless settings and more.

Scan the QR code to download the TP-Link Tether app from the Apple App Store or Google Play.

Note: Tether is not supported by some routers. Please check the app description before downloading.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login page does not appear?

A1. If the computer is set to a static or fixed IP address, change the settings to obtain an IP address automatically from the modem router.

A2. Verify http://tplinkmodem.net is correctly entered in the web browser and press Enter.

A3. Use another web browser and try again.

A4. Reboot your modem router and try again.

A5. Disable and enable the active network adapter.

Q2. What can I do if the LED status is not correct?

A1. Check your cables and make sure they are all plugged in correctly, including the telephone lines and power adapter.

A2. Restore your modem router to its factory default settings.

A3. Remove the DSL splitter, directly connect the modem router to the phone jack and then reconfigure the modem router by following the instructions in this Quick Installation Guide.

A4. Contact your ISP to verify if the DSL line is in good status.

A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q3. What can I do if I cannot access the internet?

A1. Make sure the telephone and Ethernet cables are plugged in correctly. A2. Try to log in to the web management page of the modem router using the default address at http://tplinkmodem.net. If you can, try the following answers. If you cannot, change your computer to obtain an IP address automatically from the modem router. A3. Consult your ISP and make sure all the VPI/VCI (or VLAN ID), Connection Type, account username and password are correct. If they are not, replace them with the correct settings and try again. A4. Restore the modem router to its factory default settings and reconfigure the modem router by following the instructions in this Quick Installation Guide. A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q4. What can I do if I forget my password?

- Web management page password:

A. Refer to FAQ > Q5 to reset the router, and then create a password for future login attempts, or use admin for both username and password for some routers.

- Wireless network password:

A1. The default Wireless Password/PIN is printed on the product label of the modem router. A2. If the default wireless password has been changed, log in to the web management page of the router to retrieve or reset your wireless password.

Q5. How do I restore the modem router to its factory default settings?

A1. With the modem router powered on, press and hold down the RESET button of the modem router until there is an obvious change of LEDs, and then release the button. A2. Log in to the web management page of the modem router and go to the system management page to restore the modem router.

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

For TP-Link Branded Products Only.

For the information about warranty period, policy and procedures, please visit https://www.tp-link.com/en/support

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in accordance with TP-Link's guidelines for a period that depends on the local service, from the date of original retail purchase by the end-user purchaser.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives (EU)2015/863, 2014/53/EU, 2009/125/EC and 2011/65/EU.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/.