CMNR 6184WWIFI - Refrigerator CANDY - Free user manual and instructions

Product type	Fridge-freezer combination
Brand	Candy
Model	CMNR 6184WWIFI
Climate class	SN, N, ST (10 °C to 38 °C)
Power supply	220-240 V ~ 50 Hz
Refrigerant	R600a (isobutane)
Connectivity	Built-in Wi-Fi (SmartFi+ via simplyFi app)
Display	Vertical or round touch screen depending on version
Main functions	Smart ECO, Fast Cooling, Fast Freezing, Vacation, Super Cooling, Super Freezing
Antibacterial system	UVA LEDs + mineral filter (photocatalysis)
Water dispenser	Yes, with internal tank (max line)
Defrost	Automatic (No Frost)
Interior lighting	Replaceable LED
Reversible door	Yes, reversible (right/left)
Levelling feet	Yes, adjustable at front
Maintenance and cleaning	Interior cleaning with baking soda, exterior with mild cleaner
Safety	Door open alarm, freezer overheat alarm, child lock via screen
Spare parts and repairability	LED, gaskets, hinges, thermostat (professional repair recommended)
General information	Manual available in multiple languages, 564 pages, free download

Frequently Asked Questions - CMNR 6184WWIFI CANDY

How to adjust the refrigerator temperature?

Press the Refrigerator button (or MODE icon on round screen), then use the + or - keys to adjust. The temperature flashes during adjustment.

How to enable Wi-Fi and connect the appliance to the simplyFi app?

Press the Wi-Fi icon for 3 seconds (it changes from white to blue). Download the simplyFi app, create a profile, and follow the on-screen instructions to register the appliance.

What to do if the water dispenser does not work?

Check that the water tank is filled (up to the Max line) and properly installed. Clean the dispenser lever. If the problem persists, contact after-sales service.

How to reverse the door opening direction?

Unplug the appliance and empty it. Follow the steps in the manual: remove the hinges, the doors, then reassemble on the other side. Intervention by a qualified technician is recommended.

How to clean the inside of the refrigerator?

Use warm water mixed with baking soda. Rinse with a damp sponge and dry. Do not use abrasive products.

Why is the door alarm sounding?

The alarm sounds if the refrigerator door remains open for more than 3 minutes. Close the door or press a button to stop it. It reactivates after 3 minutes if the door remains open.

How to activate Vacation mode?

Make sure there is no food in the refrigerator. Press the Option button until Vacation flashes, then press OK. The refrigerator compartment turns off, the freezer remains active.

What do the error codes E0, E1, E2 mean?

These codes indicate a sensor error. The appliance must be repaired by a professional. Contact after-sales service.

How to replace the interior LED bulb?

Unplug the appliance. Lift the lighting cover, unscrew the old LED counter-clockwise, then screw in a new identical LED. Replace the cover and plug back in.

What are the tips for saving energy?

Install the appliance away from heat sources, do not put hot food inside, do not open the door unnecessarily, set the thermostat to a moderate temperature, and regularly clean dust from the back.

USER MANUAL CMNR 6184WWIFI CANDY

ANTIBACTERIAL SYSTEM (if present)

WATER DISPENSER

SAFETY INFORMATION....29

COMBI REFRIGERATOR CANDY.... 36

Climate Class.... 36

TRANSPORTATION INSTRUCTIONS.... 36

INSTALLATION INSTRUCTIONS 37

STARTING TO USE....37

COMBI OPERATION 38

VERTICAL DISPLAY 38

ROUNDED DISPLAY....40

INTERNAL USER INTERFACE....41

TECHNICAL FEATURES 42

Freshness Control....42

ANTIBACTERIAL SYSTEM (if present) 42

WATER DISPENSER....42

Tips for keeping food perfect in the Fridge 43

Where to store your foods in the fridge.... 43

Storing Frozen Food 44

ENERGY SAVING 45

TAKE CARE....45

Defrosting 45

Cleaning and Care 45

CHANGING THE INTERNAL LIGHT 46

REVERSING THE DOOR SWING 46

TROUBLE SHOOTING....51

Thank you for purchasing this product.

Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners. This product is intended solely for household use or similar applications such as:

• the kitchen area for personnel in shops, offices and other working environments
• on farms, by clientele of hotels, motels and other environments of a residential type - bed and breakfasts (B & B)
• For catering services and similar applications, not for retail sale.

This appliance must be used only for the purpose of storing food. Any other use is considered dangerous, and the manufacturer will not be responsible for any omissions. Also, it is recommended that you take note of the warranty conditions. To obtain the best possible performance and trouble-free operation from your appliance, it is very important to carefully read these instructions. Failure to observe these instructions may invalidate your right to free service during the guarantee period.

SAFETY INFORMATION

This guide contains many important safety information.

Please, we suggest you keep these instructions in a safe place for easy reference and a good experience with the appliance.

The refrigerator contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with high compatibility with the environment, that are, however, flammable.

Caution: risk of fire

If the refrigerant circuit should be damaged:

- Avoid open flames and sources of ignition.

Thoroughly ventilate the room in which the appliance is situated.

WARNING!

- Care must be taken while cleaning/carrying the appliance to avoid touching the condenser metal wires at the back of the appliance, as you might injure your fingers and hands or damage your product.

- This appliance is not designed for stacking with any other appliance. Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

- Make sure that the mains cable is not caught under the appliance during and after carrying/moving the appliance, to avoid the mains cable becoming cut or damaged.

- When positioning your appliance, take care not to damage your flooring, pipes, wall coverings, etc. Do not move the appliance by pulling by the lid or handle. Do not allow children to play with the appliance or tamper with the controls. Our company declines to accept any liability should the instructions not be followed.

- Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water.

- Do not install the appliance near heaters or flammable materials.

- If there is a power failure do not open the lid.

Frozen food should not be affected if the failure lasts for less than 20 hours. If the failure is longer, then the food should be checked and eaten immediately or cooked and then refrozen.

- If you find that the lid of the chest freezer is difficult to open just after you have closed it, don't worry. This is due to the pressure difference which will equalize and allow the lid to be opened normally after a few minutes.

- Do not connect the appliance to the electricity supply until all packing and transit protectors have been removed.

- Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally.

- This freezer must only be used for its intended purpose (i.e. storing and freezing of edible foodstuff).

- Do not store medicine or research materials in the Wine Coolers. When the material that requires a strict control of storage temperatures is to be stored, it is possible that it will deteriorate or an uncontrolled reaction may occur that can cause risks.

- Before performing any operation, unplug the power cord from the power socket.

- On delivery, check to make sure that the product is not damaged and that all the parts and accessories

are in perfect condition.

- If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open flames. Open the window and let air into the room. Then call a service center to ask for repair.

- Do not use extension cords or adapters.

- Do not excessively pull or fold the power cord or touch the plug with wet hands.

- Do not damage the plug and/or the power cord; this could cause electrical shocks or fires.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.

- Do not place or store flammable and highly volatile materials such as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure alcohol, etc. These materials may cause an explosion.

- Do not use or store flammable sprays, such as spray paint, near the Wine Coolers. It could cause an explosion or fire.

- Do not place objects and/or containers filled with water on the top of the appliance.

- We do not recommend the use of extension leads and multi-way adapters.

- Do not dispose of the appliance on a fire. Take care not to damage the cooling circuit/pipes of the appliance in transportation and in use. In case of

damage, do not expose the appliance to fire, potential ignition source, and immediately ventilate the room where the appliance is situated.

- The refrigeration system positioned behind and inside the Wine Coolers contains refrigerant. Therefore, avoid damaging the tubes.

- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

- Do not damage the refrigerant circuit.

- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

- Do not use electrical appliances inside the food storage compartments, unless they are of the type recommended by the manufacturer.

- Do not touch internal cooling elements, especially with wet hands, to avoid cracks or injuries.

- Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of obstruction.

- Do not use pointed or sharp-edged objects such as knives or forks to remove the frost.

- Never use hairdryers, electrical heaters, or other such electrical appliances for defrosting.

- Do not scrape with a knife or sharp object to

remove frost or ice that occurs. With these, the refrigerant circuit can be damaged, the spill from which can cause a fire or damage your eyes.

• Do not use mechanical devices or other equipment to hasten the defrosting process.
• Absolutely avoid the use of open flame or electrical equipment, such as heaters, steam cleaners, candles, oil lamps, and the like, in order to speed up the defrosting phase.
• Never use water to wash the compressor position; wipe it with a dry cloth thoroughly after cleaning to prevent rust.
• It is recommended to keep the plug clean; any excessive dust residues on the plug can be the cause of fire.
• The product is designed and built for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or non-residential domestic household premises.
• The product must be correctly installed, located, and operated in accordance with the instructions contained in the User Instructions Booklet provided.
• The guarantee is applicable only to new products and is not transferable if the product is resold.
• Our company disclaims any liability for incidental or consequential damages.

- The guarantee does not in any way diminish your statutory or legal rights.

- Do not perform repairs on this Wine Cooler. All interventions must be performed solely by qualified personnel.

- If you are discarding an old product with a lock or latch fitted to the door, ensure that it is left in a safe condition to prevent the entrapment of children.

- This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or with a lack of experience and knowledge, provided that they have been given adequate supervision or instruction concerning how to use the appliance in a safe way and understand the hazards involved.

- Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.

- Locks: If your Fridge/Freezer is fitted with a lock, to prevent children being entrapped keep the key out of reach and not in the vicinity of the appliance. If disposing of an old Fridge/Freezer, break off any old locks or latches as a safeguard.

COMBI REFRIGERATOR CANDY

Climate Class

The appliance is designed to operate at the limited range of ambient temperature, depending on climate zones. Do not use the appliance at the temperature out of the limit. Climate class of your appliance is indicated on the label with technical description inside the fridge compartment.

Climate Class	Amb. T. (°C)	Amb. T. (°F)
SN	From 10 to 32	From 50 to 90
N	From 16 to 32	From 61 to 90
ST	From 16 to 38	From 61 to 100
T	From 16 to 43	From 61 to 110

TRANSPORTATION INSTRUCTIONS

The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. If during the course of transport the product has been transported horizontally, it must only be laid on its left hand side (when facing the door front) and it must not be operated for at least 4 hours to allow the system to settle after the appliance is brought back to upright position.

1. Failure to comply with the above instructions could result in damage occurring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.
2. The appliance must be protected against rain, moisture and other atmospheric influences.

INSTALLATION INSTRUCTIONS

1. If possible avoid placing the appliance near cookers, radiators or in direct sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

From Cookers 4" (100 mm)

From Radiators 12" (300 mm)

From Fridges 4" (100 mm)

1. Make sure that sufficient room, with an average temperature of between 16°C and 32°C, is provided around the appliance to ensure free air circulation. Ideally, a space of no less than 9 cm on the back and 2 cm on the sides.
2. The appliance should be located on a smooth surface.
3. It is forbidden to use the refrigerator outdoors.
4. Protection from moisture. Do not locate the freezer in moist space to avoid the metal parts rusting. And do not spray water on the freezer, otherwise it will weaken the insulation and cause current leakage.
5. Refer to "Cleaning and Care" section to prepare your appliance for use.
6. If the freezer is installed in unheated areas, garages, etc., in cold weather condensation may form on the outer surfaces. This is quite normal and is not a fault. Remove the condensation by wiping with a dry cloth.
7. Never place the refrigerator in a wall recess or into fitted cabinets or furniture. When it is working, the grille at the back may become hot and the sides warm. Do not drape the refrigerator with any covering.

STARTING TO USE

Before you start to use the freezer, please check that:

1. The interior is dry and air can circulate freely at the rear.
2. Clean the interior as recommended under "TAKE CARE" section (electric parts of the refrigerator can only be wiped by dry cloth).
3. Do not switch on until 4 hours after moving the fridge/freezer. The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes before switching back on to allow the coolant fluid to settle.
4. Before connecting the refrigerator to the mains supply, position the thermostat control dial. The thermostat control dial is located inside the fridge compartment.
5. Turn the thermostat knob to the "3" position and turn on the electricity. The compressor and the light inside the refrigerator will begin to work.
6. Before storing foods in your refrigerator, turn the refrigerator on and wait for 24 hours to make sure it is working properly and to allow the fridge/freezer to cool to the correct temperature.
7. Open the door 30 minutes later. If the temperature in the refrigerator has decreased noticeably, it shows that the refrigerator system works well. When the refrigerator operates for a period of time, the temperature controller will automatically set the temperature within limits.

COMBI OPERATION

Appliance connected to power at the first time: When the appliance is connected to power for the first time, the display will be lit for 2 seconds before going normal, and the appliance runs with intelligence function.

Display Control: When the refrigerator door is closed and there is no button operation for 3 minutes, the display light goes off.

When the display light is off, open the refrigerator door or click any button to light it up.

VERTICAL DISPLAY

TEMPERATURE SETTING: Click the "Fridge" or "Freezer" button and when it flickers in the symbol, temperatures can be set. Each time the button is clicked, the temperature changes accordingly. Temperatures cannot be set under functions of fast cooling, fast freezing, Smart ECO, and vacation. Under temperature setting, if there is no button operation for 5 seconds, the button stops flickering and the set temperature comes into effect.

SMART ECO: Activate the Smart Eco button to set the temperatures of the fridge in max. energy efficiency conditions (+4°C for fridge temperature, -18°C for freezer temperature).

To enter Smart Eco: Click "option" until it flickers and then click "OK" to enter this function.

To deactivate Smart Eco: Click "option" until it goes to Smart ECO, click "OK" to quit this function and the light goes off.

FAST COOLING: Activate Fast Cooling mode to start an additional pulse for a fast cooling of the fridge compartment. The function is activated and confirmed by the switching on of the dedicated LED icon.

To enter Fast Cooling: Click "option" until it flickers in "Fast Cooling" and then click "OK" to enter this function.

To deactivate Fast Cooling: Click "option" until it goes to "fast cooling" and then click "OK" to deactivate this function.

FAST FREEZING: Activate Fast Freezing to rapidly freeze large quantities of food while keeping intact nutritional food properties. When the light in Fast Freezing goes off and the freezer temperature goes back to the value before fast freezing. When Fast Freezing time is up (26 hours), it deactivates automatically. When it goes to Vacation, Fast Freezing stops.

To enter Fast Freezing: Click "option" until it flickers in "Fast Freezing" and then click "OK" to enter.

this function.

To deactivate Fast Freezing: Click "option" until it goes to "Fast Freezing" and then click "OK" to quit this function.

VACATION: In case of long stops, the Vacation function can be used. This function deactivates the fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge compartment before using this function. The function is activated and confirmed by the switching on of the dedicated LED icon. The light in Vacation goes off and the refrigerator temperature goes back to the value before Vacation.

Vacation quits under functions of Smart ECO and Fast Cooling.

To enter Vacation: Click "option" until it flickers in "Vacation" and then click "OK" to enter this function.

To deactivate Vacation: Click "option" until it goes to "Vacation" and then click "OK" to quit this function.

POWER OFF MEMORY: Refrigerator can automatically keep all the settings in case of power off. When the unit is plugged in again, the refrigerator will run with the settings before power off.

POWER-ON DELAY: To prevent harm to the refrigerator in case of sudden power cut and power on, the unit does not start immediately if the power off time is less than 5 minutes.

FREEZER OVER-TEMPERATURE ALARM (only in case of power on): When the freezer temperature is higher than 10°C at the first time connected to power, the symbol light of the freezer chamber goes on and the number representing temperature flickers.

Press any button or wait for 5 seconds, flickering stops and it goes back to the temperature that was set.

REFRIGERATOR DOOR OPENING ALARM: When the refrigerator is open over 3 minutes, the buzzer will buzz. Close the door or press any button to stop the alarm, but for the latter, the alarm will go again after 3 minutes.

SENSOR FAULT ALARM: When it shows "E0", "E1", "E2" or other abnormal symbols, it means sensor faults and the refrigerator needs repair.

ROUNDED DISPLAY

Rounded Display is a touch user interface. When the refrigerator is turned on, white LED lights will be enlightened. When the functions are pressed the icon lights change from white to blue.

SETTING TEMPERATURE: Press MODE icon to change the temperature.

- Refrigerator Temperature: Press the MODE icon once, the refrigerator digit blinks, and manage the temperature of the refrigerator with "+" and "-" buttons.

- Freezer Temperature: Press the MODE icon twice, the freezer digit blinks, and manage the temperature of the freezer with "+" and "-" buttons.

ECO MODE Icon: Press the Eco Mode icon to set temperatures of the fridge in maximum energy efficiency conditions (+5°C for fridge temperature, -18°C for freezer temperature). The function is activated and confirmed when the icon LED changes from white to blue.

If you want to exit the ECO mode function, you need to press the Eco Mode icon again and the refrigerator temperature turns back to normal operation.

SUPER COOLING Icon: Press the Super Cooling icon to start an additional pulse for a fast freezing of the fridge compartment. The function is activated and confirmed when the icon LED changes from white to blue.

If you want to exit the Super Cooling function, you need to press the Super Cooling icon again and the refrigerator temperature turns back to normal operation.

LOCK Icon: Press the Lock icon to block the display user interface. If the lock function is selected, the icon (LED) should turn into blue. When the Lock function is turned on, the user cannot set any new functions. To turn off the Lock function, the user must perform a long press on the icon for 3 seconds to unlock the display.

SUPER FREEZING Icon: Press the Super Freezing icon to rapidly freeze big quantities of food while keeping intact nutritional food properties. The function is activated and confirmed when the icon LED changes from white to blue.

If you want to exit the Super Freezing function, you need to press the Super Freezing icon again and the freezer temperature turns back to normal operation.

HOLIDAY Icon: In case of long stops, the Holiday function can be used. This function deactivates the fridge compartment, while leaving the freezer on. Ensure that there is no food inside the fridge compartment before using this function. The function is activated and confirmed when the icon LED changes from white to blue.

If you want to exit the Holiday function, you will need to press the Holiday icon again, the light in Holiday goes off and the refrigerator temperature goes back to the value before Holiday.

WI-FI Icon: This appliance is equipped with SmartFi+ technology that allows you to control it remotely via App. Press the Wi-Fi icon for 3 seconds to activate the Wi-Fi function and the icon light changes from white to blue.

Machine Enrollment (on App): Download the SimplyFi App on your device. The Candy SimplyFi App is available for devices running both Android and iOS, both for tablets and for smartphones. Get all the details of the SmartFi+ functions by browsing the App in DEMO mode.

Open the App, create the user profile and enroll the appliance following the instructions on the device display or the "Quick Guide" attached on the machine. This operation is necessary just for the first installation. To finalize the enrollment, follow the instructions on the smartphone's screen.

Refrigerator usage from remote by App: When the enrollment is completed, the Wi-Fi LED will be switched on. From now on it will be possible to manage the product by using the buttons on the display or using the App: both of them will be aligned according to the last command given.

INTERNAL USER INTERFACE

SET Button: Press the SET button to set the temperature until you reach the level you want, where level 1 is the warmest and level 4 is the coldest. Under normal operating conditions, we recommend using an intermediate setting (level 2).

Once the setting takes effect, it immediately enters the corresponding stall for operation control, and the stall indicator lights up for 3 seconds and then goes out. Factory default temperature is set to 2. Long press the "SET" key for more than 3 seconds to enter the hardware self-check program. The hardware self-check operation is effective within 10 minutes, and the long button operation after 10 minutes is invalid.

WI-FI Button: This appliance is equipped with SmartFi+ technology that allows you to control it remotely via App. Press the Wi-Fi icon for 3 seconds to activate the Wi-Fi function and the icon light changes from white to blue.

Machine Enrollment (on App): Download the SimplyFi App on your device. The Candy SimplyFi App is available for devices running both Android and iOS, both for tablets and for smartphones. Get all the details of the SmartFi+ functions by browsing the App in DEMO mode.

Open the App, create the user profile and enroll the appliance following the instructions on the device display or the "Quick Guide" attached on the machine. This operation is necessary just for the first installation. To finalize the enrollment, follow the instructions on the smartphone's screen.

Refrigerator usage from remote by App: When the enrollment is completed, the Wi-Fi LED will be switched on. From now on it will be possible to manage the product by using the buttons on the display or using the App: both of them will be aligned according to the last command given.

FAST COOL Button: when the "FAST COOL" button is pressed, the rapid cooling function is activated, according to the 21°C to refrigeration control gear. Maximum running time is 3 hours, after this time the temperature will be set to 1.

If the "SET" button is pressed during the process of speed cooling, the instant cooling function is immediately withdrawn and the default is entered into the next gear.

TECHNICAL FEATURES

FRESHNESS CONTROL

Thanks to freshness control, you can guarantee the right humidity level for vegetables and fruits in the crisper drawer (Fresh drawer). The humidity gets bigger as the rod goes from left to right.

ANTIBACTERIAL SYSTEM (if present)

LED UVA Lights activate a Titanium Filter producing a "photocatalysis" reaction which will destroy bacteria within the refrigerator air. This reaction works when the refrigerator door is closed to avoid purified air leakage.

In Total No Frost products, it is inserted in the sky box and it works every time the compressor works. The filter is permanent and therefore does not need changing.

The antibacterial system has to be turned off during the energy consumption test.

WATER DISPENSER

The water dispenser allows you to get chilled water without opening the fridge compartment door.

Before first use

Before using the water dispenser for the first time, remove and clean the water tank located inside the fridge compartment.

- Lift the water tank out of the fridge compartment.

- Open the water tank cover and then clean the water tank and cover in warm soapy water. Rinse thoroughly.

- After cleaning, attach the cover to the water tank and then replace the water tank back on the fridge door.

- Clean the dispenser pad outside the fridge door.

Filling the water tank with water

• Open the small cover.
• Fill the water tank with drinkable water up to the Max line.
• Close the small cover.

Dispensing

To dispense water, push the dispenser pad gently, using a glass or container. To stop the flow of water, pull your glass away from the dispenser pad.

Tips for keeping food perfect in the Fridge

Take extra care with meat and fish: cooked meats should always be stored on a shelf above raw meats to avoid bacterial transfer. Keep raw meats on a plate which is large enough to collect juices and cover it with cling film or foil.

Leave space around food: this allows cold air to circulate around the Fridge, ensuring all parts of the Fridge are kept cool.

Wrap up food!: to prevent transfer of flavors and drying out, food should be separately packed or covered. Fruit and vegetables need not be wrapped.

Pre-cooked food should be cooled properly: allow pre-cooked food to cool down before placing in the Fridge. This will help to stop the internal temperature of the Fridge from rising.

Shut the door!: to prevent cold air escaping, try to limit the number of times you open the door. When returning from shopping, sort foods to be kept in your Fridge before opening the door. Only open the door to put food in or take it out.

Where to store your foods in the fridge

Cool area: this is where to store foods which will keep longer if they are kept cool. Milk, eggs, yogurt, fruit juices, hard cheeses e.g. Cheddar. Opened jars and bottles of salad dressings, sauces and jams. Fats, e.g. Butter, margarine, low-fat spreads, cooking fats and lard.

Coldest area (0°C to 5°C): this is where foods which must be cold to keep them safe should be kept:

• Raw and uncooked foods should always be wrapped.
• Pre-cooked chilled foods, e.g. Ready meals, meat pies, soft cheeses.
• Pre-cooked meats e.g. Ham,
• Prepared salads (including pre-packed mixed green salads, rice, potato salad etc). Desserts, e.g. Fromage frais, home-prepared food and leftovers or cream cakes.

Crisper: this is the most humid part of the Fridge. Vegetables, fruit, fresh salad items, e.g. Unwashed whole lettuce, whole tomatoes, radishes etc can be stored here.

WE RECOMMEND THAT ALL PRODUCE KEPT IN THE SALAD BIN IS WRAPPED.

NOTE: Always wrap and store raw meat, poultry and fish on the lowest shelf at the bottom of the fridge. This will stop them dripping onto, or touching other foods. Do not store inflammable gases or liquids in the fridge.

Electrical operation after 3h on the freezer, the temperature in the cabinet above -12°C, the alarm light is lit, and buzzer sounds.

Storing Frozen Food

Clean and defrost your refrigerator regularly.	Freeze zzy drinks.
Prepare fresh food for freezing in small porons to ensure rapid freezing.	Consume ice-cream and water ices direct from freezer. It may cause “freezer burns” on lips.
Always choose high quality fresh food and be sure it is thoroughly clean before you freeze it.	Store poisonous or dangerous substances in the freezer.
Wrap all foods in aluminum foil or freezer quality plasc bags and make sure any air is excluded.
Wrap frozen food when you buy it and put it into the freezer shortly.
Keep food for as short a me as possible and adhere to “Best Before”, “Use By” dates.

For more about storing, download the App and visit "Tips & Hints".

ENERGY SAVING

For better energy saving we suggest:

• Installing the appliance away from heat sources and not exposed to direct sunlight and in a well-ventilated room.
• Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and therefore causing continuous functioning of the compressor.
• Do not excessively stuff foods so as to ensure proper air circulation. • Defrost the appliance in case there is ice to facilitate the transfer of cold.
• In case of absence of electrical energy, it is advisable to keep the refrigerator door closed.
• Open or keep the doors of the appliance open as little as possible.
• Avoid adjusting the setting to temperatures too cold.
• Remove dust present on the rear of the appliance.

TAKE CARE

Defrosting

This appliance has an automatic defrosting system, so there is no need to defrost it by hand.

Cleaning and Care

After defrosting, you should clean the fridge/freezer internally with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth and wipe dry. Wash the baskets in warm soapy water and ensure they are completely dry before replacing them in the fridge/freezer. Condensation will form on the back wall of the fridge; however, it will normally run down the back wall and into the drain hole behind the salad bin.

The drain hole will have a "cleaning spike" inserted into it. This ensures that small pieces of food cannot enter the drain. After you have cleaned the inside of your fridge and removed any food residues from around the hole, use the "cleaning spike" to make sure that there are no blockages. Use standard furniture polish to clean the fridge/freezer exterior. Make sure that the doors are closed to prevent polish getting on the magnetic door seal or inside.

The grille of the condenser at the back of the fridge/freezer and the adjacent components can be vacuumed using a soft brush attachment.

Do not use harsh cleaners, scouring pads, or solvents to clean any part of the fridge/freezer.

CHANGING THE INTERNAL LIGHT

1. Before carrying out the LED replacement, always disconnect the mains supply.
2. Hold and lift up the LED light cover.
3. Remove the old LED by unscrewing it in an anticlockwise direction.
4. Replace with a new LED light by screwing it in a clockwise direction, making sure that it is secure in the light holder.
5. Replace the light cover and reconnect your fridge to the mains supply, then switch it on.

REVERSING THE DOOR SWING: Disassemble the refrigerator door.

1. a. Use a tool to remove the screw from the hinge cover, and then remove the cover. Insert the communication line into the hole on the cabinet top.

b. Use a tool to remove the 4 screws from the upper hinge cover and then remove the cover.

Pry up the door bush and small end cap cover on the door.

c. Insert the door bush and door communication line into the hole on the door and then put on the small end cap cover.

d. Use a tool to remove the 2 screws as shown in the figure below to remove the hole cover on the cabinet top and get the

cabinet communication line out of the hole.

Pry up the small end cap cover on the door and get out the door bush and door communication line.

e. Insert the door bush into the round hole on the door and then put on the small end cap cover.

f. Move the refrigerator door upward over 500mm to remove the door.

1. a. Use a tool to remove the 3 screws from the middle hinge cover and then remove the middle hinge.

b. Move the freezer door upward over 500mm to remove the door.

c. Remove the adjustable front feet under the lower hinge; use a tool to remove the 4 screws from the lower hinge and then disassemble the lower hinge. Door disassembly is finished.

Assemble door, lower hinge accessories to the corresponding positions.

1. a. Use a tool to get the door bush out as shown in the below figure and assemble it to the corresponding position of the other side.

b. Use a tool to remove the screws of the stopper ass as shown in the below figure and then assemble them to the other side of the door.

c. Use a tool to remove the axle and two stoppers on the lower hinge and then assemble them to the position as shown in the below figure.

This situation applies to open door in right side. This situation applies to left side.

Assemble the refrigerator door and freezer door to the opposite side.

1. a. Remove the adjustable front foot as shown below by hand and then assemble the lower hinge to the other side of the cabinet and fix the screws by using a tool.

b. Assemble the shorter adjustable front foot to the lower hinge side and adjust the height of the foot to make the refrigerator stay in level.

1. Put on the freezer door and turn the middle hinge by 180° C and then assemble it to the other side of the cabinet; use a tool to screw up the 3 screws to fix the middle hinge.

1. Put on the refrigerator door and assemble the upper hinge to the other side of the cabinet; use a tool to screw up the 4 screws to fix the upper hinge.

After that, connect the door communication line and the cabinet communication line and then put on the upper hinge cover and fix it using a screw.

1. Assemble the hole cover to the other side of the cabinet and use a tool to screw up the hole cover.

Door disassembly is finished here.

Figure of door opening from the right.

Figure of door opening from the left

Double check that the door is aligned correctly and all the seals are closed on all sides. If necessary, re-adjust the levelling feet.

NOTE: If you want to have the door swing reversed, we recommend that you contact a qualified technician. You should only try to reverse the door yourself if you believe that you are qualified to do so. All parts removed must be saved to do the reinstallation of the door. You should rest the fridge freezer on something solid so that it will not slip during the door change process. Do not lay the fridge freezer flat as this may damage the coolant system. Ensure the fridge freezer is unplugged and empty. We recommend that 2 people handle the fridge freezer during assembly.

TROUBLESHOOTING

• If the appliance does not operate when switched on, check:
• Power cut: If the internal temperature of the Fridge/Freezer compartment is -18°C or less when the power returns, your food is safe. The food in your Fridge/Freezer will remain frozen for approx 16 hours with the door closed. Do not open the Fridge/Freezer door more than necessary.
• The product is designed and built for domestic household use only.
• The plug is inserted properly in the socket and that the power supply is on. (To check the power supply to the socket, plug in another appliance).
• The fuse has blown/circuit breaker has tripped/main distribution switch has been turned off.
• The temperature control has been set correctly.
• If the refrigerator is exceptionally cold, you may have accidentally adjusted the thermostat control dial to a higher position.
• If the refrigerator is exceptionally warm, the compressor may not be working. Turn the thermostat control dial to the maximum setting and wait a few minutes. If there is no humming noise, it is not working. Contact the local store where your purchase was made.
• If condensation appears outside of the Refrigerator, this may be due to a change in the room temperature. Wipe off any residue of moisture. If the problem continues contact the local store where your purchase was made.
• If the provided plug has been replaced, make sure the new plug is properly connected. If the appliance is still not operating after the above checks, please contact Customer Service.

SCRAPPING OLD APPLIANCES

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.

Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:

WEEE should not be treated as household waste.

WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.

Conformity

By placing the CE mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.

TABLE OF CONTENTS

SAFETY INFORMATION .... 54

COMBI CANDY 62

Climate class....62

TRANSPORT INSTRUCTIONS....62

INSTALLATION INSTRUCTIONS 63

START-UP 63

COMBINED OPERATION....64

VERTICAL DISPLAY UNIT 64

ROUND DISPLAY UNIT....66

INTERNAL USER INTERFACE 67

TECHNICAL CHARACTERISTICS 68

FRESHNESS CONTROL....68

WATER DISPENSER

ENERGY SAVING....98

CARE....98

Defrosting 98

ANTIBACTERIAL SYSTEM (if installed)

WATER DISPENSER

WATER DISPENSER

ANTIBACTERIAL SYSTEM (if present)

WATER DISPENSER

WATER DISPENSER....173

ANTIBACTERIAL SYSTEM (if present)

WATER DISPENSER

THE VERTICAL DISPLAY

WATER DISPENSER

Fill the glass

ANTIBACTERIAL SYSTEM (if so equipped)

WATER DISPENSER

DISPOSAL OF OLD APPLIANCES

ANTIBACTERIAL SYSTEM (if equipped)

ROUND DISPLAY....296

INTERNAL USER INTERFACE....297

TECHNICAL FUNCTIONS 298

FRESHNESS CONTROL.... 298

ANTIBACTERIAL SYSTEM (if present).... 298

VAN DISPENSER 298

VAN DISPENSER

1. a. Use a tool to loosen the 3 screws on the middle hinge cover, then remove it.

The doors are pre-assembled.

SET BUTTON: Press the "SET" button to set the temperature until you reach the desired level, where level 1 represents the highest and level 4 the lowest temperature. Under normal operating conditions, we recommend using the middle level (level 2).

When the setting takes effect, it immediately starts the corresponding stop for operational control, and the stop indicator lights up for 3 minutes and then turns off. The standard factory temperature is set to 2.

Press the "SET" button and hold for more than three seconds to enter the self-test program of the computer equipment. The self-test operation of the computer equipment starts within 10 minutes, and holding the button for a long time is not valid after 10 minutes.

WI-FI BUTTON: The device is equipped with SmartFi+ technology that allows remote control of the device via an app. Press and hold the Wi-Fi icon for three seconds to activate the Wi-Fi function, the icon light changes from white to blue.

Connecting the device (via the app): Download the SimplyFi app to your device. The Candy SimplyFi app is available for devices using Android and iOS operating systems, for tablets and smartphones. Learn all about SmartFi+ features by searching the app in DEMO mode. Open the app, create a user profile and connect the device by following the on-screen instructions or the "Quick Guide" provided with the device. This action is only necessary during the first installation. To complete the connection, follow the instructions shown on the smartphone screen.

ANTIBACTERIAL SYSTEM (if present)

WATER DISPENSER

Filling

To pour water, gently press the dispenser tap with a glass or container. To stop the water flow, remove the glass from the dispenser tap.

b. Using a tool, remove the screws from the top hinge cover, and then remove it.

Lift the door bushing and the small end cap cover on the doors.

c. Insert the door bushing and the connection line into the hole on the door, and then install the small end cap cover.

d. Using a tool, remove the two screws as shown in the figure below to remove the hole cover on the top of the cabinet, and then take out the cabinet connection line from the hole.

Lift the small end cap cover on the door and take out the door bushing and the door connection line.

e. Insert the door bushing into the round hole on the door, and then install the small end cap cover.

f. Move the refrigerator door upward more than 500 mm to remove the door.

1. a. Using a tool, remove the 3 screws from the middle hinge cover, and then remove the middle hinge.

b. Move the freezer door upward more than 500 mm to remove the door.

c. Remove the adjustable front foot under the bottom hinge; using a tool, remove the 4 screws from the bottom hinge, and then disassemble the bottom hinge. The door removal is complete.

Mounting the door and the bottom hinge accessories at the corresponding positions

1. a. Using a tool, take out the door bushing as shown in the figure below, and assemble it at the corresponding position on the other side.

b. Using a tool, remove the screws from the plug as shown in the figure below, and then assemble them on the other side of the door.

c. Using a tool, remove the shaft and the two plugs on the bottom hinge, and then assemble them at the position as shown in the figure below.

b. Assemble the shorter adjustable front foot on the side of the lower hinge and adjust the height of the foot so that the refrigerator is level.

1. Place the freezer door and rotate the middle hinge 180 degrees, then install it on the other side of the cabinet; using a tool, tighten the 3 screws to secure the middle hinge.

1. Set the refrigerator door and assemble the upper hinge on the other side of the compartment; using a tool, tighten the 4 screws to secure the upper hinge.

After that, connect the door wiring harness and the compartment wiring harness, then install the upper hinge cover and secure it with a screw.

1. Assemble the hole cover on the other side of the compartment and, using a tool, tighten the hole cover screws.

This appliance is marked according to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE).

SET button: Press the SET button to adjust the temperature until you reach the desired level, where level 1 is the warmest and level 4 is the coldest. Under normal operating conditions, we recommend using the middle level (level 2).

When the setting takes effect, it immediately starts the corresponding stop for operational control, and the stop indicator lights up for 3 minutes and then turns off. The standard factory temperature is set to 2.

Press and hold the "SET" button for more than 3 seconds to enter the hardware self-test program. The hardware self-test operation starts within 10 minutes, and holding the button for a long time is not valid after 10 minutes.

WATER DISPENSER

The water dispenser allows you to get cold water without opening the refrigerator compartment door.

Before first use

Before first use of the water dispenser, remove and clean the water tank located inside the refrigerator compartment.

• Lift and remove the water tank from the refrigerator compartment.
• Open the water tank lid, then clean the water tank and lid in warm soapy water. Rinse thoroughly.
• After cleaning, place the lid on the water tank, then return the water tank to the refrigerator door.
• Clean the dispenser faucet outside the refrigerator door.

A "cleaning tip" will be inserted into the drain opening. This will prevent small food particles from falling into the opening. After cleaning the inside of your refrigerator and removing food residue around that opening, use the "cleaning tip" to check if the opening is clogged. For cleaning the outside of the refrigerator/freezer, use common furniture polish. Make sure the appliance doors are closed so that the polish does not get on the magnetic gasket on the doors or inside the appliance.

c. Insert the door bushing and the connection line into the hole on the door, and then put the cover of the small end cap.

d. Using a tool, remove the two screws as shown in the figure below to remove the hole cover on the top of the compartment, and then pull the compartment connection line out of the hole.

Lift the cover of the small end cap on the door and take out the door bushing and the door connection line.

e. Insert the door bushing into the round hole on the door, and then put the cover of the small end cap.

f. Move the refrigerator door upward over 500mm to remove the door.

1. a. Using a tool, remove the 3 screws from the middle hinge cover, and then remove the middle hinge.

b. Move the freezer door upward over 500mm to remove the door.

c. Remove the adjustable front foot under the bottom hinge; using a tool, remove the 4 screws from the bottom hinge, and then disassemble the bottom hinge. The disassembly of the doors is complete.

Assembling the doors, accessories of the bottom hinge at the corresponding positions.

1. a. Using a tool, take out the door bushing as shown in the figure below and assemble it at the corresponding position on the other side.

b. Using a tool, remove the screws from the plug as shown in the figure below, and then assemble them on the other side of the door.

c. Using a tool, remove the shaft and two plugs on the bottom hinge, and then assemble them at the position as shown in the figure below.

Apply this situation for opening the door on the right side. Apply this situation to the left side.

Assembling the refrigerator door and freezer door on the opposite side

1. a. Manually remove the adjustable front foot as shown below, then assemble the lower hinge on the other side of the compartment and tighten the screws using the tool.

1. Position the freezer door and rotate the middle hinge 180 degrees, then place it on the other side of the compartment; use the tool to tighten 3 screws to secure the middle hinge.

1. Position the refrigerator door and assemble the upper hinge on the other side of the compartment; use the tool to tighten 4 screws to secure the upper hinge. After that, connect the door wiring and the compartment wiring, then install the upper hinge cover and secure it with the screw.
2. Assemble the hole cover on the other side of the compartment and use the tool to tighten the hole cover screws.

Image of doors opening from the left side

Make sure the doors are properly aligned and that the gaskets are sealed on all sides. If necessary, readjust the leveling feet.

NOTE: If you want to change the door swing direction, we recommend contacting a qualified technician. Attempt to change the door swing direction yourself only if you feel you are qualified. You must keep all removed parts to reinstall the doors. Lean the refrigerator/freezer against something stable to prevent it from slipping during the door swing reversal process. Do not lay the refrigerator/freezer on its back to avoid damaging the cooling system. Make sure the refrigerator/freezer is unplugged and empty. We recommend that two people handle the refrigerator/freezer during assembly.

TROUBLESHOOTING

ANTIBACTERIAL SYSTEM (if available)

WATER DISPENSER

WATER DISPENSER

ANTIBACTERIAL SYSTEM (if available)

VODOMAT

1. Place the freezer door and rotate the middle hinge 180° and attach it to the other side of the cabinet by tightening 3 screws with a tool to secure the middle hinge.

1. Place the refrigerator door and install the upper hinge on the other side of the cabinet by tightening 4 screws with a tool to secure the upper hinge.

After that, connect the door communication wire and the cabinet communication wire, then install the upper hinge cover and secure it with a screw.

WATER DISPENSER

Tips for perfect food storage in the refrigerator

1. Place the refrigerator door and install the upper hinge on the other side of the cabinet; secure the upper hinge by screwing in 4 screws using a tool.

WATER DISPENSER

ANTIBACTERIAL SYSTEM (if available)

WATER DISPENSER

ANTIBACTERIAL SYSTEM (if available)

WATER DISPENSER

into the refrigerator door.

WATER DISPENSER