CD60RE - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free CD60RE BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Corded electric drill |
| Brand | Black & Decker |
| Model | CD60RE |
| Power supply | Mains, 230 V ~ 50 Hz |
| Power | 600 W |
| No-load speed | 0 – 2,800 rpm (variable) |
| Chuck type | Keyless, capacity 1.5 – 13 mm |
| Drilling capacity (wood) | 25 mm |
| Drilling capacity (metal) | 10 mm |
| Reverse rotation | Yes |
| Variable speed trigger | Yes |
| Continuous lock button | Yes |
| Power cord | 2 m |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 30 x 20 x 8 cm |
| Maintenance and cleaning | Clean with a dry cloth; lubricate the chuck if necessary |
| Safety | Unplug before any maintenance; wear protective goggles |
| Spare parts and repairability | Parts available; contact after-sales service |
| General information | Domestic use; not suitable for intensive professional use |
Frequently Asked Questions - CD60RE BLACK & DECKER
How to change the chuck of the CD60RE drill?
To change the chuck, loosen it fully by turning the collar. Remove the drill bit then unscrew the chuck completely by turning it counterclockwise. Use an Allen key to unlock the set screw if necessary. Mount the new chuck by hand-tightening and then tighten firmly.
How to reverse the rotation direction?
Use the reverse button located above the trigger. Push it to the left for clockwise rotation (drilling/screwing) or to the right for reverse (unscrewing). Never change direction while the drill is running.
What speed to use for drilling metal?
For metal, use a slow speed (light trigger pressure) and a suitable drill bit. Start with a pilot hole using a fine bit, then gradually increase. Apply moderate pressure and use drilling lubricant if necessary.
How to adjust the drilling depth?
The CD60RE does not have an integrated depth stop. You can use an optional side stop or mark the depth on the bit with adhesive tape. This simple method allows drilling to the desired depth without damaging the workpiece.
Can I use hammer drill bits with this drill?
No, the CD60RE is a non-hammer drill. It is not designed for drilling masonry. Use it only for wood, metal, and plastic. For concrete or brick, choose a hammer drill.
What to do if the drill does not start?
First check that the power outlet works and the cord is not damaged. Make sure the lock button is not engaged. If the problem persists, the carbon brush or switch may be defective; contact after-sales service.
How to clean the CD60RE drill?
Always unplug the drill before cleaning. Use a soft, dry cloth to wipe the housing. Do not use water or solvents. For the chuck, blow out dust with compressed air. Lightly lubricate the jaws if tightening becomes difficult.
How to store the drill safely?
Store the drill in a dry place, protected from dust and out of reach of children. Wind the cord without forcing it. Avoid extreme temperatures. Store it in its original case if possible.
What types of drill bits can I use with the CD60RE?
Use cylindrical shank bits with a diameter between 1.5 and 13 mm, suitable for the keyless chuck. Prefer HSS bits for metal, wood bits for wood, and carbide-tipped bits for hard plastics.
Is the drill suitable for screwing?
Yes, the CD60RE can be used for screwing thanks to its variable speed trigger and reverse rotation. Use a suitable screwdriver bit in the chuck. Adjust the torque by applying moderate pressure to avoid stripping heads.
User questions about CD60RE BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual CD60RE - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CD60RE by BLACK & DECKER.
USER MANUAL CD60RE BLACK & DECKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLACK & DECKER
Model : CD60RE
Category : Drill