KC14GT - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free KC14GT BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Black & Decker |
| Model | KC14GT |
| Appliance type | Cordless drill |
| Power supply | Lithium-ion battery 14.4 V |
| No-load speed (1st gear) | 0 – 450 rpm |
| No-load speed (2nd gear) | 0 – 1500 rpm |
| Drilling capacity (wood) | 25 mm |
| Drilling capacity (metal) | 10 mm |
| Drilling capacity (masonry) | 12 mm |
| Chuck | 10 mm self-tightening chuck |
| Max torque (adjustable) | 20 Nm |
| Screwing (max.) | 8 mm |
| Weight (with battery) | 1.5 kg |
| Dimensions (L x W x H) | 220 x 65 x 180 mm |
| Main functions | Drilling, screwing, hammer |
| Maintenance and cleaning | Clean with a dry cloth, no solvents |
| Safety | Chuck brake, spindle lock |
| Spare parts and repairability | Batteries, charger, brushes available |
| General information | Manual 88 pages, multilingual |
Frequently Asked Questions - KC14GT BLACK & DECKER
How to change the battery of the KC14GT drill?
Press the unlock button located at the back of the drill and slide the battery downwards. Insert the new battery until it clicks into place with a click.
What is the battery charging time?
The full charging time is approximately 3 to 5 hours depending on the discharge level. Use only the charger supplied by Black & Decker.
How to adjust the tightening torque?
Turn the torque adjustment ring located behind the chuck. The numbers indicate the torque level (1 = low, 20 = high) to avoid unscrewing or damaging the material.
Can I drill into concrete with this drill?
Yes, the hammer function allows drilling into masonry up to 12 mm in diameter. Use a suitable hammer drill bit.
How to clean the drill?
Remove the battery and wipe the exterior with a dry cloth. Never use chemicals or water. The ventilation slots can be cleaned with compressed air.
What to do if the chuck jams?
Make sure the drill is off and the battery removed. Try to loosen the chuck manually, or use a chuck key if necessary.
Is the drill delivered with a battery and charger?
Yes, the KC14GT kit usually includes a 14.4V lithium-ion battery and a charger. Check the product sheet to confirm the package contents.
How to reverse the rotation direction?
Use the control button located above the trigger. Push it to the left or right to select forward or reverse rotation (unscrewing).
What drill bits can I use?
Use cylindrical shank bits with a maximum diameter of 10 mm. For wood, wood bits; for metal, HSS bits; for masonry, hammer bits.
The drill stops during use, what to do?
This may indicate a discharged battery. Recharge the battery. If the problem persists, the brushes may be worn and should be replaced by a professional.
User questions about KC14GT BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual KC14GT - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KC14GT by BLACK & DECKER.