AST2XC - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free AST2XC BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Black & Decker |
| Model | AST2XC |
| Power Source | Corded Electric |
| Input Power | 500 W |
| No-Load Speed | 0 - 3000 rpm (variable) |
| Chuck Type | Keyless, 13 mm |
| Drilling Capacity (Wood) | 25 mm |
| Drilling Capacity (Steel) | 13 mm |
| Maximum Torque | 30 Nm |
| Weight | 1.6 kg |
| Dimensions (L x W x H) | 250 x 70 x 190 mm |
| Power Cord Length | 3 m |
| Forward/Reverse Switch | Yes |
| Lock-On Button | Yes |
| Built-in Level | Yes |
| Soft Grip Handle | Yes |
| Maintenance | Keep vents clean; lubricate chuck occasionally |
| Safety Features | Double insulated; lock-off switch |
| Spare Parts Availability | Chuck, carbon brushes, power cord available |
Frequently Asked Questions - AST2XC BLACK & DECKER
How to install a drill bit in the AST2XC?
Open the keyless chuck by turning it counterclockwise, insert the bit, and tighten clockwise until secure. For best results, use bits with a 1/2 inch (13 mm) shank.
What is the maximum drilling depth in wood?
The AST2XC can drill up to 25 mm in wood when using a properly sized drill bit. For deeper holes, use a longer bit and clear chips frequently.
Can I use this drill for masonry?
The AST2XC is designed primarily for wood and metal. For masonry, a hammer drill is recommended. Using standard bits on masonry may damage the drill.
How to change the speed on the drill?
The AST2XC has variable speed controlled by the trigger pressure. There is no gear selector. Press lightly for low speed, harder for high speed.
Why does the chuck slip?
Ensure the chuck is tightened firmly by hand. If slipping persists, clean the chuck jaws and the bit shank. Worn or damaged bits can also cause slipping.
How to reverse the drill direction?
Locate the forward/reverse switch near the trigger. Slide it to the left for forward (clockwise) and right for reverse (counterclockwise).
Always wait for the chuck to stop before switching.
Always wait for the chuck to stop before switching.
What maintenance does the drill require?
Periodically clean the ventilation slots with a brush. Lubricate the chuck by applying a small amount of grease inside the jaws. Replace carbon brushes when worn.
Is the drill double insulated?
Yes, the AST2XC is double insulated for safety. It does not require a grounding wire, but always use in dry conditions.
Where to buy spare parts for AST2XC?
Spare parts such as chucks, carbon brushes, and power cords are available from authorized Black & Decker service centers or online retailers. Use only genuine parts.
What is the noise level of this drill?
The sound pressure level is approximately 85 dB(A) under load. Always wear hearing protection when operating for extended periods.
User questions about AST2XC BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual AST2XC - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AST2XC by BLACK & DECKER.