KR806 - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free KR806 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Corded electric drill |
| Brand | Black & Decker |
| Model | KR806 |
| Power consumption | 600 W |
| Supply voltage | 220-240 V ~ 50/60 Hz |
| No-load speed | 0-2800 rpm |
| Max drilling diameter (wood) | 25 mm |
| Max drilling diameter (metal) | 10 mm |
| Max drilling diameter (concrete) | 13 mm |
| Chuck | 13 mm keyed chuck |
| Hammer function | Yes |
| Variable speed | Yes, by trigger |
| Forward/reverse | Yes |
| Sound level | 92 dB(A) |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 25 x 20 x 8 cm |
| Cable length | 2 m |
| Protection class | II (double insulation) |
| Maintenance and cleaning | Disconnect before cleaning. Use a dry cloth. Do not use abrasive products. |
| Safety | Wear safety glasses. Do not use in explosive atmospheres. Keep children away. |
| Spare parts and repairability | Parts available on the Black & Decker website or from authorized dealers. |
| General information | User manual available for free download in PDF format. Domestic use. |
Frequently Asked Questions - KR806 BLACK & DECKER
How to change the drill bit on the KR806 drill chuck?
Use the supplied chuck key. Insert it into one of the holes on the chuck and turn counterclockwise to loosen. Replace the bit, then tighten by turning clockwise.
How to reverse the rotation direction?
Use the direction selector located above the trigger. Push it to the left for forward and to the right for reverse.
How to adjust the drilling speed?
The speed is variable: the more you press the trigger, the higher the speed. For better control, apply gradual pressure.
What is the maximum drilling diameter in wood?
The recommended maximum diameter in wood is 25 mm. Use appropriate drill bits and drill at low speed for large diameters.
Can I use the drill for screwdriving?
Yes, the KR806 drill can be used for screwdriving. Adjust the torque setting if your model has one (adjusting ring near the chuck). Otherwise, use a slow speed and do not force.
How to activate the hammer function?
The hammer function is activated by turning the ring located behind the chuck to the hammer symbol. To drill without hammer, set it to the drill symbol.
What is the power of the KR806 drill?
The Black & Decker KR806 drill has a power of 600 W. It is suitable for drilling in wood, metal, and concrete.
How to clean and maintain the drill?
Always unplug the device before cleaning. Clean the housing with a dry cloth. Never immerse the drill in water. Regularly check the condition of the cable and chuck.
What to do if the chuck no longer tightens properly?
Check that the chuck key is properly inserted and that you are tightening firmly. If the problem persists, the chuck may be worn: contact Black & Decker customer service for a replacement.
Where to download the complete user manual?
The free user manual is available for download in PDF format on the notice-facile.com website. Search for 'KR806 Black & Decker' to access the document.
User questions about KR806 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual KR806 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KR806 by BLACK & DECKER.