KS635 - Service après-vente BLACK & DECKER - Free user manual and instructions
Find the device manual for free KS635 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Jigsaw |
| Brand | Black & Decker |
| Model | KS635 |
| Supply voltage | 230 V ~ 50 Hz |
| Power consumption | 500 W |
| No-load speed | 0 - 3000 min⁻¹ |
| Max. cutting depth in wood | 65 mm |
| Max. cutting depth in steel | 10 mm |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 250 x 80 x 190 mm |
| Main functions | Straight cut, curved cut, plunge cut, laser guide |
| Maintenance and cleaning | Clean with a dry cloth; do not use solvents; regularly check motor carbon brushes |
| Safety | Safety switch, shaft lock, blade protection cap |
| Spare parts and repairability | Replacement blades available; authorized Black & Decker after-sales service |
| General information | User manual included; 2-year warranty |
Frequently Asked Questions - KS635 BLACK & DECKER
How to change the blade on the KS635 jigsaw?
Unplug the tool, push the blade release lever forward, insert the new blade until it stops, then release the lever. Check that the blade is securely fastened before use.
What is the recommended speed for cutting wood?
For wood, use a high speed (2500-3000 min⁻¹). For harder materials, reduce the speed.
How to adjust the laser guide?
The laser guide is adjusted using a knob near the handle. Turn it to align the beam with the desired cutting line.
What to do if the saw does not start?
Check that the plug is properly connected and that the power cord is not damaged. If the problem persists, contact after-sales service.
How to clean the jigsaw?
Unplug the tool, use a dry cloth to remove dust. Do not use chemicals. Ventilation openings must be free of debris.
Can I cut metal with the KS635?
Yes, use a blade suitable for metal and set the speed to a low value (1500-2000 min⁻¹). Wear protective equipment.
Where to find replacement blades?
Replacement blades are available at Black & Decker dealers or online. Use T-shank blades (universal shank).
How to perform a plunge cut?
Tilt the saw base so that the blade gradually enters the material. Turn on the saw and lower it gently until the blade goes all the way through.
What does the red indicator light mean?
The red indicator light means that the motor carbon brushes are worn and need to be replaced. Contact an authorized service center.
How to store the jigsaw?
Store it in a dry, dust-free place. Use the supplied carrying case to protect the tool.
User questions about KS635 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Service après-vente in PDF format for free! Find your manual KS635 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KS635 by BLACK & DECKER.