KD351CRE - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free KD351CRE BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Corded electric drill |
| Brand | Black & Decker |
| Model | KD351CRE |
| Power supply | Mains 230 V ~ 50 Hz |
| Power | 650 W |
| No-load speed | 0-2800 rpm (variable) |
| Chuck | Keyless, 10 mm (3/8") |
| Drilling capacity wood | 25 mm |
| Drilling capacity steel | 10 mm |
| Drilling capacity concrete | 12 mm |
| Handle | Ergonomic with rubber coating |
| Power cord | 2 m |
| Weight | 1.6 kg |
| Dimensions (L x W x H) | 260 x 190 x 70 mm |
| Functions | Drilling, screwdriving (with bit) |
| Safety | Double insulation, trigger switch with lock |
| Maintenance and cleaning | Clean with a dry cloth, avoid moisture |
| Spare parts and repairability | Motor brushes available, interchangeable chuck |
| General information | 2-year warranty |
Frequently Asked Questions - KD351CRE BLACK & DECKER
How to change the chuck of the Black & Decker KD351CRE drill?
To change the chuck, first screw a locking screw (if present) into the chuck, then use an Allen key to unscrew the center screw. Then turn the chuck counterclockwise to remove it. To install the new chuck, screw it on by hand then tighten with the key.
How to reverse the rotation direction of the drill?
Use the rotation direction switch located above the trigger. Push it to the left for clockwise rotation (drilling) and to the right for counterclockwise (unscrewing). Make sure the drill is stopped before changing direction.
What is the power of the Black & Decker KD351CRE drill?
The KD351CRE drill has a power of 650 W, making it suitable for drilling in wood, metal, and light concrete.
How to adjust the speed of the drill?
The drill is equipped with an electronic variable speed trigger: the harder you press, the faster it goes. There is no staged speed selector.
What type of chuck does the KD351CRE have?
It comes with a keyless chuck of 10 mm (3/8 inch), allowing easy bit changes by hand.
How to maintain the Black & Decker KD351CRE drill?
Regularly clean the ventilation slots with a soft brush. Keep the drill clean and dry. Replace the motor brushes when worn (approximately every 50 hours of heavy use).
What is the maximum drilling capacity in wood?
The drilling capacity in wood is 25 mm with a standard wood drill bit. For larger diameters, use a hole saw.
Is the drill suitable for drilling concrete?
Yes, it can drill concrete up to 12 mm with a masonry bit. For heavier work, a hammer drill is recommended.
How to use the trigger lock?
The drill has a built-in trigger lock: press the lock button on the side of the handle to keep the drill running continuously. To deactivate, press the trigger again.
Where to find spare parts for the KD351CRE?
Spare parts such as motor brushes, the chuck, or the power cord are available at authorized Black & Decker dealers or on online spare parts websites.
User questions about KD351CRE BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual KD351CRE - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KD351CRE by BLACK & DECKER.