KR654CRES - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free KR654CRES BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric drill |
| Brand | Black & Decker |
| Model | KR654CRES |
| Rated power | 650 W |
| Variable no-load speed | 0 - 2800 rpm |
| Chuck | 13 mm keyless chuck |
| Drilling capacity (steel) | 13 mm |
| Drilling capacity (wood) | 25 mm |
| Drilling capacity (masonry) | 13 mm |
| Rotation direction switch | Yes |
| Speed regulator | Electronic speed control |
| Power cord | 2 meters |
| Length | 30 cm |
| Weight | 1.8 kg |
| Power supply | Mains 220-240 V, 50 Hz |
| Safety class | Class II (double insulation) |
| Sound level (acoustic pressure) | 87 dB(A) |
| Sound level (acoustic power) | 98 dB(A) |
| Vibrations (metal drilling) | 5.5 m/s² |
| Vibrations (wood drilling) | 4.5 m/s² |
| Maintenance and cleaning | Clean with a dry cloth; lubricate the chuck periodically; check the brushes |
| Safety | Wear eye and ear protection; do not use in humid environment |
| Spare parts and repairability | Brushes, chuck, switch available |
| General information | User manual of 80 pages; manual available in several languages |
Frequently Asked Questions - KR654CRES BLACK & DECKER
How to change the chuck of the Black & Decker KR654CRES drill?
To change the chuck, loosen the center screw (if present) with a screwdriver, then turn the chuck counterclockwise to remove it. Install the new chuck by hand-tightening, then tighten the center screw.
The drill does not start, what to do?
First check the power supply and the cord. Make sure the speed switch is not blocked. If the problem persists, the brushes may be worn: replace them.
How to adjust the speed of the drill?
The drill is equipped with an electronic speed control: the more you press the trigger, the higher the speed. Use the presetting wheel to limit the maximum speed.
What is the power of the KR654CRES drill?
The KR654CRES model has a rated power of 650 watts, suitable for drilling in wood, metal and masonry.
Can you screw with this drill?
Yes, thanks to the rotation direction switch and speed control, you can use the drill for screwing and unscrewing. Use a suitable bit.
How to clean the drill after use?
Unplug the appliance. Clean the housing with a damp cloth and dry it. Never immerse the drill in water. The ventilation openings can be dusted with a soft brush.
Which drill bits to use with the KR654CRES?
Use drill bits with cylindrical shank up to 13 mm diameter. For wood, up to 25 mm; for steel and masonry, up to 13 mm.
Should the chuck be lubricated?
Yes, it is recommended to apply a drop of lubricant to the chuck jaws from time to time to ensure proper tightening.
How to use the hammer mode?
The KR654CRES model is not a hammer drill. To drill into masonry, use a carbide-tipped drill bit and apply constant pressure.
Where to find the user manual?
The manual is available for free download on notice-facile.com as an 80-page PDF. You can also request a translated version in your language.
User questions about KR654CRES BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual KR654CRES - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KR654CRES by BLACK & DECKER.