PBA-6001MK2 - Battery charger DENVER - Free user manual and instructions

Product type	Battery charger / Power Bank
Brand	Denver
Model	PBA-6001MK2
Battery capacity	6000 mAh / 3.7 V (Lithium-ion)
Input	DC 5 V, 2 A (max) via micro USB
Output 1	5 V DC, 1 A
Output 2	5 V DC, 2.1 A
Number of output ports	2 (USB ports)
Dimensions	W 96 x D 64 x H 22 mm
Weight	Approx. 183 g
Charging time (device)	Approx. 7.5 h (1 A adapter) or 5 h (2 A adapter / computer)
Battery lifespan	> 500 charge cycles (80% capacity after 300 cycles)
Battery indicator	4 LEDs: 0-25%, 25-50%, 50-75%, 75-100%
Flashlight function	Yes, activation by button (2-3 seconds)
Operating temperature	0 °C to 45 °C (charging and discharging)
Storage temperature	-10 °C to 45 °C, humidity 25% to 65%
Materials	Plastic and electronic components
Included accessories	USB cable (micro USB), quick start guide
Maintenance and cleaning	Wipe with a soft, dry cloth. Do not use abrasive products.
Safety	Overcharge, short-circuit and overheat protection. Keep out of reach of children.
Repairability	Do not disassemble. No user-serviceable parts.
General information	Imported by DENVER ELECTRONICS A/S, Denmark. Recycle at end of life.

Frequently Asked Questions - PBA-6001MK2 DENVER

How to charge the Denver PBA-6001MK2 itself?

Use the included micro USB cable and plug it into a power adapter (5V, 2A recommended) or a computer USB port. The LED blinks during charging and turns off when complete.

What devices can I charge with this power bank?

It can charge most smartphones, tablets, MP3, MP4 and other digital devices via a USB cable. Make sure the device voltage is compatible with the 5V output.

How to read the power bank battery level?

The 4 LEDs indicate the level: 1 LED on = 0-25%, 2 LEDs = 25-50%, 3 LEDs = 50-75%, 4 LEDs = 75-100%. If the first one blinks at less than 5%, recharge the power bank.

Can I use both output ports at the same time?

Yes, you can charge two devices simultaneously. The total current is limited to 2.1 A maximum.

How to use the built-in flashlight?

Press the switch for 2 to 3 seconds to turn on the LED, and again for 2 to 3 seconds to turn it off.

What to do if the power bank does not charge my device?

Check that the cable is properly connected and that the device is 5V compatible. Try pressing the switch to activate the output. If the problem persists, test with another cable.

Is it safe to leave the power bank charging overnight?

It is recommended to unplug the power bank once fully charged to avoid premature battery wear. The protection circuit cuts off charging, but prolonged overcharging may reduce lifespan.

How to maintain the Denver PBA-6001MK2?

Clean it with a soft, dry cloth. Do not expose to heat or moisture. If not used for a long time, recharge it every three months to 50%.

What to do if the power bank heats abnormally?

Slight warming is normal. If it becomes very hot, unplug it immediately and stop using it. Do not cover the product during charging.

How to recycle the Denver PBA-6001MK2 at end of life?

Do not throw it in household waste. Drop it off at a collection point for electronic devices and batteries. Check with your local municipality for the nearest center.

USER MANUAL PBA-6001MK2 DENVER

Exterior view of a white rectangular electronic device with two ports and a 'DAIVER' logo on the side (no other text or symbols visible)

www.facebook.com/denverelectronics

DENVER PBA-6001MK2

Bærbar Strømbank

C. LED power-indikatorer

D. USB udgangsport

E. MicroUSB indgangsport

F. MicroUSB-stik

G. USB-kabel

H. USB-stik

Indikator for batteriniveau

	LED-indikator	Resterende batterikapacitet
	1 indikator lyser	0-25%
	2 indikatorer lyser	25-50%
	3 indikatorer lyser	50-75%
	4 indikatorer lyser	75-100%

Simple line drawing of a cable inserted into a device (no text or symbols)

Simple line drawing of a closed book connected to a cable (no text or symbols)

Simple line drawing of a smartphone connected to a power bank via cable (no text or symbols)

OBS:

Simple line drawing of a USB drive with cable (no text or symbols)

Simple line drawing of a closed notebook connected to a USB flash drive (no text or symbols)

Simple line drawing of a smartphone connected to a power bank via cable (no text or symbols)

DENVER PBA-6001MK2

denver-electronics.com

F. Micro USB connector

G. USB cable H. USB connector

1. Charge DENVER PBA-6001MK2 with AC adapter (AC adapter is not bundled).

Simple line drawing of a cable with a plug inserted into a rectangular device (no text or symbols)

1. Charge DENVER PBA-6001MK2 by connecting it to USB port on compu .ret

Simple line drawing of a closed notebook connected to a USB drive (no text or symbols)

1. Charging digital products using DENVER PBA-6001MK2.

Simple line drawing of a smartphone connected to a battery via cable (no text or symbols)

DENVER PBA-6001MK2

Portable External Batery

Support most DC5V USB input smartphones, tablets, MP3, MP4 and other digital products charging.

Thank you for using SMLH products.

Please read the instructions carefully before using the product.

Follow the instructions and use it properly.

Instruc ons

Charging DENVER PBA-6001MK2 (Figure 1/Figure 2)

1. Use original USB data cable and connect microUSB to microUSB port on DENVER PBA-6001MK2;

2. Connect USB cable to USB port on DC5V USB charger or computer.

If LED signal flickers, it means DENVER PBA-6001MK2 is being charged;

Please pull out power supply after recharging fully.

Charging digital product with DENVER PBA-6001MK2 (Figure 3)

1. Check if the charging voltage of the digital product is compatible with the DC5V output voltage of DENVER PBA-6001MK2.

2. Use the digital product's original cable, and connect one end to the digital product, the other end to DENVER PBA-6001MK2. If battery signal (output signal) lights up, it means the charging process starts. When all signals light up, it means the digital product is fully charged.

Flashlight function

Press the switch for 2\~3 seconds to turn on the LED flashlight and another 2\~3 seconds to turn it off.

LED power indicator:

	LED Signal Ba ery Percentage ^tt
	One signal lights up 0~25%
	Two signals light up 25~50%
	Three signals light up 50~75%
	Four signals light up 75~100%

1. When switching off, LED signal will go out in 5 seconds and the battery will enter sleep mode in about 1 minute. If users want to use the battery to charge digital products, please switch on to wake it up.

2. When switching off, the 1st signal (output signal) will flicker if the power is less than 5% to prompt users that the battery itself needs

Specifications

Name	DENVERPBA-600 2KM1	Input DC	5 XAM A2
Lithium-ion battery inside	6000mAh/3.7V	Output	DC 5V 1A, 5V 2.1A
Capacity	6000mAh	Weight	~183g/6.46ozs
Size	~L96 x W64 x H22mm~L3.78x W2.51 x H0.86inches
Charging me	~7.5 hours (using 1A AC adapter)~5 hours (using 2A AC adapter or PC USB)
Environment for Use	indoors
Ambient Temperature for Use	Charging 0°C~45°C; discharging 0°C ~45°C
Environment for Storage	Storage temperature: -10°C ~45°CHumidity: 25%~65%
The electrical core will have 80% capacity left after 300 cycles. (Recycling times: >500 times)

Cautions:

1. Charge the product itself before using it to charge other products.

2. Do not place or use the product in very hot or humid environment; do not place or use it in direct sunlight, (Standard charge method: under standard atmospheric pressure, ambient temperature 25^ ± 5^ , it can be charged to 4.2V with constant current of 0.5A, and then, charged continuously with constant voltage of 4.2V until the charged current is 0.01A. Standard discharge method: under standard atmospheric pressure, ambient temperature 25^ ± 5^ , it can be discharged to the voltage of 2.75V with constant current of 0.5A.)

3. Do not throw this product into fire or water, so as to avoid possible fire and explosion.

4. Please keep the product out of the reach of children.

5. Do not use it when nobody is around.

6. Do not dismantle or assembly the product yourself; the product does not have any parts that need users to dismantle, assembly or maintain themselves.

7. Do not shake it, tap it or hit it.

8. Do not use it if any liquid leaks out of the product. If the liquid goes into your eyes, do not rub your eyes, but quickly flush your eyes with running water. If necessary, go to see a doctor.

9. It is normal that the product gets hot under proper operations. Please use with

care when using or finishing using the product.

1. Original transmission cables and connectors are required for all operations. Use of non-original products may lead to severe or deadly injuries or monetary loss.
2. Do not use paper or other objects to cover or shield the product, which may affect heat dissipation and cooling.
3. Check the voltage before using the product, so as to avoid unnecessary damage to the product caused by improper use under inaccurate voltage or power.
4. Please charge and discharge the product once every three months if it is not used for a long time. This can ensure the life cycle of the product.
5. Once discharged, please recharge the product fully so as to prepare for later use, for example, for charging digital products.
6. Unplug the power cable when not using the product, so as to avoid injury or property loss.

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Imported by:

DENVER ELECTRONICS A/S

Omega 5A, Soeften

DK-8382 Hinnerup

Denmark

www.facebook.com/denverelectronics

DENVER

denver.electronics.com

Käyttöohje

DENVER PBA-6001MK2

Exterior view of a white cylindrical device with two side slots, labeled 'DAFTV/GER' (no other text or symbols visible)

www.facebook.dk/denver-electronics

Tuo een osat

A. LED-taskulamppu B. Painike

Illustration of a cable with a plug inserted into a device (no text or symbols visible)

Simple line drawing of a closed notebook connected to a USB flash drive (no text or symbols)

Simple line drawing of a smartphone connected to a battery pack (no text or symbols)

DENVER PBA-6001MK2

denver-electronics.com

White portable electronic device labeled 'DEVIAGE' with two ports, no visible text beyond branding

www.facebook.dk/denver-electronics

Aspect du produit

A. TORCHE à LED

B. Touche

Simple line drawing of a plug inserted into a network device (no text or symbols)

Simple line drawing of a closed book with a cable and a small object attached (no text or symbols)

Simple line drawing of a smartphone connected to a battery via a cable (no text or symbols)

DENVER PBA-6001MK2

Baterie portable externe

Simple line drawing of a power adapter connected to a rectangular device (no text or symbols)

Simple line drawing of a closed notebook connected to a rolled document (no text or symbols)

Illustration of a smartphone connected to a power bank via cable (no text or symbols)

DENVER PBA-6001MK2

Mobiler externer Akku

Illustration of a USB drive connected to a power plug (no text or symbols visible)

1. Ricaricare DENVER PBA-6001MK2 collegandolo a una porta USB del computer

Simple line drawing of a closed book and a rolled document with a cord (no text or symbols)

Simple line drawing of a smartphone connected to a power bank via cable (no text or symbols)

DENVER PBA-6001MK2

Bateria esterna porta le

White rectangular electronic device with two ports and a 'DETER' logo on its side (no other text or symbols visible)

www.facebook.dk/denver-electronics

Wygląd produktu

A. Latarka LED B. Przycisk

Simple line drawing of a plug inserted into a network device (no text or symbols)

Simple line drawing of a closed book connected to a rolled document (no text or symbols)

Simple line drawing of a smartphone connected to a battery pack (no text or symbols)

DENVER PBA-6001MK2

denver-electronics.com

Simple line drawing of a cable with a plug inserted into a device (no text or symbols)

Simple line drawing of a closed book connected to a rolled document (no text or symbols)

Simple line drawing of a smartphone connected to a power bank via cable (no text or symbols)

DENVER PBA-6001MK2

Bateria Externa Portád

White portable electronic device with two ports and a 'DANGER' logo on its side (no other text or symbols visible)

www.facebook.dk/denver-electronics

Simple line drawing of a USB drive connected to a power strip (no text or symbols)

Simple line drawing of a closed notebook connected to a rectangular power bank (no text or symbols)

Simple line drawing of a smartphone connected to a power bank (no text or symbols)

DENVER PBA-6001MK2

White portable electronic device labeled 'DENVER' with two side ports (no additional text or symbols visible)

www.facebook.dk/denver-electronics

Produktens utseende

Simple line drawing of a battery with a plug and cable (no text or symbols)

1. Ladda DENVER PBA-6001MK2 genom a tt ansluta den tll å USB-porten p datorn

Simple line drawing of a closed notebook and a rectangular device with a cable (no text or symbols)

Simple line drawing of a smartphone connected to a power bank via cable (no text or symbols)

DENVER PBA-6001MK2

Externt bateri

denver-electronics.com

White cylindrical device labeled 'DSIVER' with gray casing and two side slots (no additional text or symbols visible)

www.facebook.dk/denver-electronics

Produktdesign

A. LED-lommelykt

B. Knapp

C. LED-strømlampe

D. USB-utgangsport

E. Micro USB inngangsport

F. Micro USB-kontakt

G. USB-kabel

H. USB-kontakt

Illustration of a white electronic device with a cable and plug inserted, no visible text or symbols

Simple line drawing of a closed notebook connected to a rectangular device with a cable (no text or symbols)

Simple line drawing of a smartphone connected to a battery via cable (no text or symbols)

DENVER PBA-6001MK2

Bærbart eksternt batteri

Lader de fleste smarttelefoner, nettbrett, MP3, MP4 og andre digitale produkter med DC5V USB-inngang.

denver-electronics.com