Executive J873 - UR JAGUAR - Free user manual and instructions

Brand	Jaguar
Model	Executive J873
Category	UR
Product type	Chronograph wristwatch
Movement	Quartz (SWISS MADE)
Power source	Button cell battery
Main functions	Display of hours, minutes, seconds and date; Chronograph with seconds, minutes and hours counters; Timing with addition and intermediate times
Chronograph	START/STOP/RESET functions, addition, intermediate times
Quick date correction	Yes (pull the crown to position II and turn)
Time setting	Precise to the second possible (pull the crown to position III)
Chronograph hand zero position adjustment	Yes, after battery change (simultaneously press A and B in position III)
Crown	3 positions (I, II, III)
Pushers	A and B for chronograph controls
Maintenance	Avoid exposure to water and shocks. Clean with a soft, dry cloth.
Safety	Comply with WEEE regulations: selective collection of waste electrical and electronic equipment
Battery replacement	Recommended by an authorized professional
Origin	Switzerland (SWISS MADE)
Manual	32 pages in French, available for download

Frequently Asked Questions - Executive J873 JAGUAR

How to set the time on my Jaguar Executive J873 watch?

Pull the crown to position III (the seconds hand stops). Turn the crown to set the desired time. Push the crown back to position I. For precise setting to the second, pull the crown when the seconds hand is at 60 and push it back exactly at the desired second.

How to use the chronograph?

Press pusher A to start timing. Press A again to stop. Press pusher B to reset the chronograph hands to zero. You can also perform additions or intermediate times using the pushers as per the manual instructions.

How to reset the chronograph hands to zero?

Press pusher B. The three chronograph hands (seconds, minutes and hours counters) return to their zero position.

How to correct the date quickly?

Pull the crown to position II (the watch continues running). Turn the crown until the correct date appears. Push the crown back to position I. Avoid setting the date between 9 PM and midnight, as the calendar mechanism is engaged.

What to do if my watch stops working?

The battery is probably drained. Have the battery replaced by an authorized professional. After battery replacement, it may be necessary to reset the chronograph and set the date and time.

How to set the time after a battery change?

Follow the steps: 1) Pull the crown to position II and turn to display the day before the current date. 2) Pull the crown to position III. 3) Turn to display the current date and exact time. 4) Push the crown back to position I.

How to adjust the chronograph hands if they are not in zero position?

Pull the crown to position III. Simultaneously press pushers A and B for at least 2 seconds. The seconds hand rotates 360°: correction mode is activated. Then use the pushers to adjust each hand (step by step or continuously). Push the crown back to position I to finish.

Can I swim with my Jaguar Executive J873 watch?

The manual does not specify the water resistance level. It is advised to avoid any contact with water to preserve the mechanism.

How to clean my watch?

Use a soft, dry cloth to wipe the case and bracelet. Avoid chemicals, solvents, or ultrasonic cleaners.

Where to find replacement batteries?

Go to an authorized Jaguar watchmaker or jeweler. Battery replacement must be done by a professional to ensure water resistance and proper operation.

USER MANUAL Executive J873 JAGUAR

Line drawing of a stylized animal head in profile (no text or symbols)

JAGUAR SWISS MADE

USER GUIDE IJM5030D

INDEX

Español > p.01

English > p.13

Français > p.25

Deutsch > p.37

Italiano > p.49

Manual del usuario

• Description of the display and control buttons.... 14
• Chronograph 15
• Setting the time 20
• Setting the date (quick mode) 21
• Setting the date time following a battery change.... 22

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of life cycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point.

The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.

Description of the display and control buttons

Chronograph: Basic function

START/STOP/RESET

Example:

① Start: Press push-button A.
② Stop: to stop the timing, press push-button A once more and read the three chronograph hand: 1h/20min/10sec
③ Zero positioning:

Press push-button B. (The three chnorograph hands will be reset to their zero positions).

Chronograph: Accumulated timing

Minute counter

Hour counter Hour counter

Example: Example:

① Start: (start timing)
② Stop: (c.g. 15 min 5 sec following ①)
③ Restart: (timing is resumed)
-④ *Stop: (c.g. 13 min 5 sec following ③) = 28 min 10 sec (the accumulated measured time is shown).

⑤ Reset:

The three chronograph hands are returned to their zero positions

Please note:

Following*4, the accumulation of the timing can be continued by pressing push-button A (Restart / Stop, Restart/Stop,...)

Chronograph

Intermediate or interval timing

Minute counter

Push-button A

① Start: (start timing)

Display interval: c.g. 10 minutes, 10 seconds (timing continues in the background).

② Making up the measured time:

(the 3 chronograph hands are quickly advanced to the ongoing measured time).

③ Stop: (Final time is displayed)

④ Reset:

The 3 chronograph hands are returned to their zero position.

Please note:

Following ③, further intervals or intermediates can be displayed by pressing push-button B (display interval/make up measured time,...)

Adjusting the chronograph hands to zero position

Minute counter Center stop-second

Example:

One or several chronograph hand are not in their correct zero positions and have to be adjusted (e.g. following a battery change).

① Pull out the crown to position III (all 3 chronograph hands are in their correct or incorrect zero position).
② Keep push-buttons A and B depressed simultaneously for at least 2 seconds (the centre stop-second rotates by 360^ corrective mode is activated)

Adjusting the centre stop second: Single step √A 1 x short Continuous long
Adjusting the next hand B
Adjusting the hour counter hand (position 6h)
Single step A1 x short Continuous long
Adjusting the next hand B
Adjusting the minute counter hand (position 9h)
Single step 1x short Continuous long
③ Returning the crown to position I Termination of the chronograph hands adjustment (can be carried out at any time)

Setting the time

① Pull out the crown to position III * (the watch stops).
② Turn the crown until you reach the correct time 8:45.
③ Push the crown back into position 1.*

Please note: Please note:

In order to set the time to the exact * second, ① must be pullet out when the second hand is in position "60" (I). Once the hour and minute hands have been set, ③ must be pushed back into position I at the exact second.

Setting the date (quick mode)

① Pull out the crown to position II (the watch continues to run).
② Turn the crown until the correct date 1 appears.
③ Push the crown back into position 1.

During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following day.

Setting the date/time

Following a battery change

Example:

Date/time on the watch: 17/1:25 AM – Present date/time: 4/8:30 PM –

① Pull out the crown to position II (the watch continues to run).
② Turn the crown until yesterday's date appears 3.

③ Pull out the crown to position * III (the watch stops).
④ Turn the crown until the correct date appears.
⑤* Continue to turn the crown * until the correct time 8:30 PM appears.
⑥ Push the crown back into position 1.

Please note:

To set your watch to the exact * second please refer to the chapter entitled "setting the time".

- Please observe the AM/PM clock * rhythm.

Mode d'emploi

Compteur des heures

Exemple:

Nota: Nota:

Hinweise: Hinweise:

Notare:

Esempio:

Empty white rectangle with black border (no text or symbols)

FESTINA GROUP

Via Layetana, 20

08003 BARCELONA

A COMPANY OF THE FESTINA GROUP