DS-7104NI-Q1/M - Video recorder Hikvision - Free user manual and instructions
Find the device manual for free DS-7104NI-Q1/M Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Network Video Recorder (NVR) with PoE |
| Model | DS-7104NI-Q1/M |
| Brand | Hikvision |
| Video Input | 4 IP cameras |
| Compression | H.265+/H.265/H.264+/H.264 |
| Recording Resolution | Up to 8 MP per channel |
| PoE Ports | 4 x PoE (IEEE 802.3af/at) |
| Hard Drive | 1 SATA HDD (up to 6TB) |
| Network Interface | 1 RJ45 10/100/1000 Mbps |
| USB Ports | 2 x USB 2.0 |
| Power Supply | 12V DC, 1.5A (external adapter) |
| Power Consumption | ≤15W (without HDD) |
| Dimensions (W x D x H) | 200 mm x 200 mm x 45 mm |
| Weight | 0.9 kg (without HDD) |
| Operating Temperature | -10°C to 55°C |
| Operating Humidity | 10% to 90% |
| Remote Access | Hik-Connect, DDNS, NTP |
| Compatibility | Hikvision cameras, ONVIF compliant |
| Maintenance | Keep device clean and ensure proper ventilation. |
| Safety | Use only supplied power adapter. |
| Spare Parts | Power adapter, hard drive (standard SATA). |
| Repairability | User-replaceable hard drive. |
Frequently Asked Questions - DS-7104NI-Q1/M Hikvision
How to set up the NVR for the first time?
Connect the NVR to your network via Ethernet, attach a monitor to the HDMI or VGA port, and power it on. Follow the on-screen wizard to set admin password, configure network, and add cameras.
How to add cameras to the NVR?
Go to Camera Management in the NVR interface. Click Add and enter the camera's IP address, username, and password. For plug-and-play, connect cameras to the PoE ports.
How to view remotely using Hik-Connect?
Install the Hik-Connect app on your smartphone. Create an account and add the NVR by scanning the QR code on the device or entering the serial number. Ensure the NVR has internet access.
How to install a hard drive?
Power off the NVR and remove the cover. Connect a SATA HDD (up to 6TB) to the SATA cable and power connector, then secure the drive in place. Replace the cover and power on. The NVR will detect the drive automatically.
What is the maximum storage capacity?
The NVR supports one SATA hard drive up to 6TB. For larger storage, consider external recording solutions.
How to reset the NVR to factory settings?
Press and hold the Reset button (usually on the back panel) for 10 seconds while the device is powered on. Alternatively, go to System Settings > Maintenance > Factory Defaults.
Does it support audio recording?
Yes, if the connected cameras have built-in microphones or audio input. Audio can be recorded and played back via the NVR.
How to update firmware?
Download the latest firmware from Hikvision's website. In the NVR interface, go to System Settings > Maintenance > Firmware Update and select the file. Do not power off during update.
What is the warranty period?
Warranty typically lasts 2 years from the date of purchase, subject to the terms of your local retailer.
Can I use non-Hikvision cameras?
Yes, the NVR supports ONVIF compliant cameras. Non-ONVIF cameras may require manual configuration and may not support all features.
User questions about DS-7104NI-Q1/M Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual DS-7104NI-Q1/M - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-7104NI-Q1/M by Hikvision.