Hikvision DS-7708NI-I4/8P - Video recorder

DS-7708NI-I4/8P - Video recorder Hikvision - Free user manual and instructions

Find the device manual for free DS-7708NI-I4/8P Hikvision in PDF.

📄 184 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hikvision DS-7708NI-I4/8P - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Type Network Video Recorder (NVR)
Brand Hikvision
Model DS-7708NI-I4/8P
Channels 8
PoE Ports 8 (built-in)
Video Compression H.265+/H.265/H.264+/H.264
Recording Resolution Up to 12 megapixels
Hard Disk Support 4 SATA, up to 8TB each
Power Supply 100-240V AC, 50/60Hz
Power Consumption ≤50 W (without HDD)
Dimensions (W×D×H) 380 × 320 × 48 mm
Weight ≤3.5 kg (without HDD)
Operating Temperature -10°C to +55°C
Humidity 10% to 90% (non-condensing)
Network Interface 1 RJ45 10/100/1000 Mbps
Video Output 1 HDMI, 1 VGA
Audio 1 input, 1 output (RCA)
Remote Access Hik-Connect, DDNS, web browser
Security Password protection, IP address filter, user management
Maintenance Clean with dry cloth; keep away from moisture and dust
Spare Parts & Repairability Hard drives, power supply unit, fan are replaceable

Frequently Asked Questions - DS-7708NI-I4/8P Hikvision

How many cameras can I connect to the DS-7708NI-I4/8P?
The DS-7708NI-I4/8P supports up to 8 IP cameras directly via its built-in PoE ports. Additional cameras can be connected through the network if a PoE switch is used.
What is the maximum hard drive capacity?
The NVR has 4 SATA bays, each supporting up to 8TB, for a total of 32TB of storage.
Can I access the NVR remotely?
Yes, remote access is available via Hik-Connect app, DDNS, or web browser. You need to configure port forwarding or use P2P.
How do I upgrade the firmware?
Download the latest firmware from Hikvision's official website, then log into the NVR via web browser, go to System > System Maintenance > Firmware Upgrade, and upload the file.
What should I do if the NVR does not detect my cameras?
Ensure cameras are powered via PoE or external power, check network cables, and verify that cameras are on the same subnet as the NVR. You may need to manually add cameras by IP address.
Does this NVR support audio recording?
Yes, it has 1 audio input and 1 audio output for two-way audio. Audio can be recorded if the connected camera supports audio.
Can I use this NVR with third-party cameras?
The NVR is optimized for Hikvision cameras but supports ONVIF compliant cameras. Some features may be limited.
How do I reset the NVR to factory settings?
Press and hold the Reset button on the front panel for 10 seconds. Alternatively, go to System > Maintenance > Factory Defaults in the web interface.
What is the warranty period?
Hikvision typically offers a 2-year warranty for this model. Check with your retailer for specific terms.
How do I clean and maintain the NVR?
Use a dry, soft cloth to clean the exterior. Avoid liquid cleaners. Ensure ventilation is not blocked and keep the device in a dust-free, dry environment.

User questions about DS-7708NI-I4/8P Hikvision

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Video recorder in PDF format for free! Find your manual DS-7708NI-I4/8P - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-7708NI-I4/8P by Hikvision.

USER MANUAL DS-7708NI-I4/8P Hikvision

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hikvision

Model : DS-7708NI-I4/8P

Category : Video recorder