ER326BB70L - Cooker SIEMENS - Free user manual and instructions

Product Type	Built-in Gas Hob
Brand	Siemens
Model	ER326BB70L
Number of Burners	2
Burner Configuration	Double Burner (LPG hob double burner)
Front Burner Power	1.9 kW
Rear Burner Power	2.8 kW
Top Material	Schott Ceran glass
Color	Black
Gas Type	LPG
Operating Pressure	29 mbar
Total Heat Input	4.7 kW
Ignition System	Automatic (electric spark)
Safety System	Thermocouple flame failure device
Control Type	Progressive rotary knobs
Pan Support Material	Enamel-coated metal
Cleaning Instructions	Clean with soapy water; do not put burner caps in dishwasher
Accessories Included	Pan supports; additional wok pan support (optional)
Installation Type	Built-in (Class 3 per EN 30-1-1)
Warranty	As per applicable conditions in country of purchase

Frequently Asked Questions - ER326BB70L SIEMENS

How do I ignite the gas hob?

Press the chosen burner control knob and turn it anticlockwise to the maximum power setting. Sparks are produced automatically while pressing. Once the flame ignites, release the knob and adjust to desired setting.

What should I do if the burner does not light?

Turn the knob to the off position and wait at least one minute. Ensure the burner parts are dry and correctly positioned. If it still does not light, check the gas supply and ignition sparker cleanliness. If the problem persists, contact Technical Assistance.

What pans are suitable for this hob?

Use pans with thick, flat bases. Minimum diameter for rear burner: 22 cm, maximum 26 cm; front burner: minimum 14 cm, maximum 20 cm. For wok burner, use additional wok pan support for pans over 26 cm diameter.

How do I clean the hob?

Clean with a sponge and soapy water after the hob cools. Burner caps should be cleaned separately with a non-wire brush; do not put them in the dishwasher. Avoid abrasive cleaners. Always dry all parts before use.

Can I use a wok on this hob?

Yes, especially on the rear burner (2.8 kW) which is suitable for wok cooking. Use the additional wok pan support for pans larger than 26 cm to ensure stability.

What type of gas does this hob use?

This hob is designed for LPG (liquefied petroleum gas) with an operating pressure of 29 mbar. It should only be used with LPG; conversion to other gas types must be performed by an authorized technician.

Is the hob safe to use?

Yes, it includes a thermocouple safety system that automatically cuts off gas flow if the flame goes out. Always supervise cooking, keep children away, and ensure proper ventilation.

How to adjust the flame height?

Turn the control knob between minimum and maximum positions. The progressive knob allows infinite adjustment. For double-flame burners (if applicable), inner and outer flames can be controlled separately.

What if I smell gas?

Immediately turn off all gas taps, do not operate any electrical switches, ventilate the room by opening windows, and contact a registered gas installer or Technical Assistance Service. Do not use the hob until it is declared safe.

Where can I get service or spare parts?

Contact Siemens Technical Assistance Service. In Hong Kong call 2625 5777, in Macau call 0800 030. Have the product number (E-Nr.) and production number (FD) ready, found on the specifications plate under the hob.

USER MANUAL ER326BB70L SIEMENS

Operating instructions

ER326AB70L

LPG hob wok burner

ER326BB70L

LPG hob double burner

This operating instruction should be retained

中文說明書

型號

ER326AB70L 石油氣單頭爐

ER326BB70L 石油氣雙頭爐

請保留此說明書

en

Table of contents

Safety precautions 3-4

Your new appliance 5

Accessories 6

Gas burners 6

Switching on automatically 7

Safety system 7

Switching off a burner 7

Power levels 7

Warnings 7

Cooking guidelines 7

Cooking pans 8

Suitable pans 8

Precautions for use 8

Cleaning and maintenance 8

Cleaning 8

Maintenance 8

Trouble shooting 9

Technical Assistance Service 9

Warranty conditions 9

Used appliances and packaging 10

Environmentally-friendly waste management 10

Additional information on products, accessories, replacement parts and services can be found at www.siemens-home.com.hk

Safety precautions

Read these instructions carefully. You will only be able to use your appliance safely and effectively when you have read them. These operating and installation instructions should be retained, and passed onto the buyer if the appliance is sold.

Attention!

According to the Gas Safety Regulations of Hong Kong, any gas installation works including the installation of appliances and connection tubing, must be undertaken by registered gas installers who are registered for that appropriate classes and be employed by registered gas contractors.

Use approved gas tubing bearing EMSD approval marking (such as : 機電工程署批准 EMSD APPROVAL GTXXXX) for connection to appliances, or other appropriate methods accepted by EMSD.

Please do not use additional fitting, such as aluminium cover.

The manufacturer is exempt from all responsibility if the requirements of this manual are not complied with.

The images shown in these instructions are for guidance only.

Do not remove the appliance from its protective packaging until it is installed in the unit. Do not switch on the appliance if it is damaged in any way. Contact our Technical Assistance Service.

This appliance is class 3 type, according to the EN 30-1-1 regulation for gas appliances: built-in appliance.

Before installing your new hob, ensure that it is being installed according to the assembly instructions.

This appliance cannot be installed on yachts or in caravans.

This appliance must only be used in well ventilated places.

This appliance is not intended for operation with an external clock timer or a remote control.

All operations relating to installation, connection, regulation and conversion to other gas types must be performed by an authorised technician, respecting all applicable regulations, standards and the specifications of the local gas and electricity suppliers. Special attention shall be paid to ventilation regulations.

When installing built-in gas hob on top of stove cabinet, please check that there is provision for ventilation at the cabinet to ensure proper operation of the gas hob.

Do not store any flammable materials, sprays or pressurized containers inside the stove cabinet.

The panel of this built-in hob is made of ceramic glass which is safer than normal glass for this application. However, the following safety precautions for using built-in hob with glass top panel should also be noted in order to prevent the glass top panel from breaking:

1. Clean the burner assembly frequently to maintain a clear gas passage on the flame distributor. Clean and tidy up the flame distributor after spillage of food

and liquid once the burner assembly cooled down.

1. Turn off the gas appliance immediately if abnormal noise propagates from the gas appliance and contact gas supply company or gas hob importer for inspection.
2. Do not use oversized utensils for cooking.
3. Do not impact the glass surface with hard objects or place heavy objects on the glass surface.

This appliance has been designed for home use only, not for commercial or professional use. This appliance is only intended for cooking purposes, not as a heating system. The warranty will only be valid if the appliance is used for the purpose for which it was designed.

Never leave the appliance unattended during operation.

Do not use lids or protective barriers for children which are not recommended by the hob manufacturer. They may cause accidents such as those due to the overheating, ignition or detachment of fragments of materials.

This appliance may be used by children 8 years old and older and by persons with reduced physical, sensory or mental capacity or a lack of experience or knowledge if they are supervised or they have been instructed about the safe use of the appliance and have understood the associated dangers.

Never let children play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.

Risk of deflagration!

Accumulation of unburned gas in an enclosed area carries a risk of deflagration. Do not subject the appliance to draughts. These might blow out the burners. Carefully read the instructions and warnings on the operation of gas burners.

Risk of poisoning!

The kitchen will become hot and humid and combustion products produced when this gas appliance is used. Make sure the kitchen is well ventilated, particularly when the hob is in operation: either keep the natural ventilation apertures open, or install a ventilation system (extractor hood). Intense prolonged use of the appliance may require additional or more effective ventilation: open a window or increase the power of the ventilation system.

Risk of burns!

The hotplates and their immediate vicinity get very hot. Never touch the hot surfaces. Keep children under 8 years old well away from this appliance.

Risk of fire!

• The hotplates get very hot. Do not rest inflammable objects on the hob. Do not store objects on the hob.
• Do not store or use corrosive chemicals, products which produce fumes, inflammable materials or non-food products below or near this domestic appliance.
• Fat or oil which is overheated can catch fire easily. Never leave fat or oil to heat up unattended. If oil or fats do catch fire, never use water to put the fire out. Put the fire out by covering the pan with a lid and switch off the hotplate.

Risk of injuries!

• Pans which are damaged, are not the right size, hang over the edge of the hob or are not positioned correctly can cause serious injuries. Follow the advice and warnings provided relating to the cooking pans.
• In the event of a malfunction, turn off the appliance's gas and electricity supply. For repairs, call our Technical Assistance Service.
• Do not tamper with the appliance's interior. If necessary, call our Technical Assistance Service.
• If one of the control knobs will not turn, do not force it. Call the Technical Assistance Service immediately so that they can repair or replace them.

Risk of electric shock!

• Do not clean the appliance using steam cleaners.
• Cracks or breaks in the glass may carry an electrocution risk. Disconnect the fuse from the fuse box. Notify the Technical Assistance Service.

Your new appliance

ER326BB70L

ER326AB70L

1) Pan support
2) Knob
3) Burner (Up to 1.9kW)
4) Burner (Up to 2.8kW)
5) Double flame burner (Up to 6.0kW)

These individual appliances can be combined and/or with conventional hobs of the same make, using the joint accessory. See the catalogue for details.

(By registered gas installer who employed by registered gas contractor.)

Page 6 shows an overall view of your new appliance as well as the burner power.

These appliances can be combined with conventional hobs of the same make, using the joint accessory. See the catalogue for details.

Accessories

Depending on the model, the hob may include the following accessories. These can also be acquired from the Technical Assistance Service. (By registered gas installer who employed by registered contractor.

Additional wok pan support

Only for use on double and triple-flame wok burners with pans which are more than 26 cm in diameter, grill pans, earthenware casserole dishes, large pans with a round base, etc.

The additional wok pan support should be used to prolong the appliance's useful life.

The manufacturer accepts no liability if these accessories are not used or are used incorrectly.

Gas burners

There are indications to show which burner each control knob operates.

It is essential to ensure that all the burner parts and pan supports are correctly installed for the appliance to work correctly. Do not swap the burner caps around.

Switching on automatically

Your hob can be switched on automatically (ignition sparkers):

1. Press the chosen burner control knob and turn it anticlockwise to the maximum power setting. While the control knob is still pressed down, sparks are produced on all burners. The flame ignites.
2. Release the control knob.
3. Turn the control knob to the required setting.

If it does not come on, turn the control knob to the off setting and repeat the steps above. This time, press and hold the control knob for longer (up to 10 seconds).

= Risk of deflagration!

If after 15 seconds the flame does not ignite, switch off the burner and open a nearby window or door. Wait at least one minute before trying to switch the burner back on.

Safety system

Depending on the model, your hob has a safety system (thermocouple) that prevents the flow of gas if the burners accidentally switch off.

To ensure that this device is active:

1. Switch on the burner as usual.
2. Without releasing the control knob, press and hold it down firmly for 4 seconds after lighting the flame.

Switching off a burner

Turn the corresponding control knob clockwise to the 0 setting.

Power levels

The progressive control knobs can be used to control the power needed, from minimum to maximum power.

Setting	○	Control knob off
High flame		Maximum capacity or aperture and electricity on
Low flame		Minimum capacity or aperture

For dual double-flame burners, the inner and outer flames can be controlled separately. The available power levels are as follows:

Inner and outer flame on full power.

Outer flame on low power, inner flame on full power.

Inner flame on full power.

Inner flame on low power.

Warnings

It is normal to hear a soft whistling noise while the burner is operating.

When first used, it is normal for the burner to give off odours. This does not pose any risk and does not indicate a malfunction. They will disappear in time.

An orange-coloured flame is normal. This is caused by the presence of dust in the atmosphere, spilt liquids, etc.

If the burner flames are accidentally blown out, switch off the burner operating control knob and do not try to relight it for at least 1 minute.

A few seconds after the burner is switched off, a sound (thud) will be produced. This is not a fault - this means that the safety device is no longer operating.

Keep the burner as clean as possible. If the ignition sparkers are dirty they will not light properly. Clean them periodically using a small non-wire brush. Bear in mind that the ignition sparkers must not suffer any serious impacts.

Cooking guidelines

Burner	Very high - High	Medium	Low
Wok burner	Boiling, steaming, griddling, toasting, paellas, Asian food (wok).	Reheating and keeping things hot: cooked and pre-cooked dishes
Rapid burner	Escalopes, steaks, omelettes, frying	Rice, white sauce, ragout	Steaming: fish, vegetables
Semi-rapid burner	Steamed potatoes, fresh vegetables, vegetable stews, pasta	Reheating, keeping things hot and making tasty casseroles

Cooking pans

Suitable pans

Burner Minimum pan diameter		Maximum pan diameter
Wok burner 22	cm
Rapid burner	22 cm	26 cm
Semi-rapid burner	14 cm	20 cm

Precautions for use

The following advice is intended to help you save energy and prevent pan damage:

Use pans which are the right size for each burner.

Do not use small pans on large burners. The flame must not touch the sides of the pan.

Do not use damaged pans, which do not sit evenly on the hob. Pans may tip over.

Only use pans with a thick, flat base.

Do not cook without using a lid and make sure the lid is properly fitted. This wastes energy.

Always centre the pan over the burner, not to one side. Otherwise it could tip over.

Do not place large pans on the burners near the control knobs. These may be damaged by the very high temperatures.

Place the pans on the pan supports, never directly on the burner.

Make sure that the pan supports and burner caps are correctly positioned before using the appliance.

Pans should be placed on the hob carefully.

Do not strike the hob and do not place excessive weight on it.

Cleaning and maintenance

Cleaning

Once the appliance is cool, use a sponge to clean it with soap and water.

After each use, clean the surface of the respective burner parts once they have cooled down. If any residue is left (baked-on food, drops of grease etc.), however little, it will become stuck to the surface and more difficult to remove later. The holes and grooves must be clean for the flame to ignite properly.

The movement of some pans may leave metal residue on the pan supports.

Clean the burners and pan supports using soapy water and scrub with a non-wire brush. Alternatively, the pan supports can be put in the dishwasher. Use the dishwasher manufacturer's recommended detergent. If the pan supports are very dirty, they should be cleaned previously.

Caution!

Do not put the burner caps in the dishwasher. If the pan supports are fitted with rubber rests, ensure that these are also cleaned. The rests may come loose and the pan support may scratch the hob.

Always dry the burners and pan supports completely. Water droplets or damp patches on the hob at the start of cooking may damage the enamel.

After cleaning and drying the burners, make sure the burner caps are correctly positioned on the diffuser.

Caution!

• Do not use steam cleaners. This could damage the hob.
• Never use abrasive products, steel scourers, sharp implements, knives, etc. to remove bits of hardened food from the hob.
• Do not use knives, scrapers or similar implements to clean the point where the glass meets the burner trims, the metal frames or the glass/aluminium panels, if fitted.

Maintenance

Always clean off any liquid as soon as it is spilt. This will prevent food remains from sticking to the hob surface and you will save yourself any unnecessary effort.

Never slide pans across the glass surface, as you may scratch it. In addition, try not to drop heavy or sharp objects on the glass. Never strike any part of the hob.

Grains of sand that may come from cleaning fruits and vegetables will scratch the glass surface.

Melted sugar, or foods which contain a lot of sugar which may have spilt, should be cleaned off the hotplate immediately, using the glass scraper.

Trouble shooting

Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice:

Fault Possible cause Solution

The general electrical system is malfunctioning.	Defective fuse.	Check the fuse in the main fuse box and change it if it is damaged.
	The automatic safety switch or circuit breaker has tripped.	Check the main control panel to see if the automatic safety switch or circuit breaker has tripped.(By certificated person)
The automatic switching on function does not work.	There may be food or cleaning products stuck between the ignition sparkers and the burners.	The space between the ignition sparker and the burner must be clean.
	The burners are wet.	Dry the burner caps carefully.
	The burner caps are not correctly positioned.	Check that the burner caps are correctly positioned.
	The appliance is not earthed, is poorly connected or the earthing is faulty.	Contact the certificated person.
The burner flame is not uniform.	The burner components are not correctly positioned.	Correctly place the parts on the appropriate burner.
	The grooves on the burner are dirty.	Clean the grooves on the burner.
The gas flow is not normal or there is no gas.	The gas supply is blocked by gas taps.	Open all gas taps.
	If the gas is supplied from a gas cylinder, check that it is not empty.	Change the gas cylinder.
The kitchen smells of gas.	A gas tap has been left on.	Turn off the taps.
	Incorrect coupling of gas cylinder.	Check that the coupling is sound.
	Possible gas leak.	Shut off the gas supply, ventilate the premises and immediately notify an authorised installation technician to check and certify the installation. Do not use the appliance until ensuring that there is no gas leak in the installation or appliance itself.
The burner immediately switches off after releasing the control knob.	The control knob was not held down for long enough.	Once the burner is on, hold the control knob down a few seconds longer.
	The grooves on the burner are dirty.	Clean the grooves on the burner.

Technical Assistance Service

When contacting our Technical Assistance Service, please provide the product number (E-Nr.) and production number (FD) of the appliance. This information is given on the specifications plate located on the lower section of the hob and on the label in the user manual.

To book an engineer visit and product advice

2625 5777 Hong Kong

0800 030 Macau local call only

Trust the expertise of the manufacturer, and rest assured that the repair will be carried out by trained service technicians using original spare parts for your domestic appliance.

Warranty conditions

In the unlikely event that the appliance is damaged or does not meet your expectations in terms of quality, please inform us as soon as possible. For the warranty to be valid, the appliance must not have been tampered with, or used inappropriately.

The applicable warranty conditions are those set out by the company's representative office in the country of purchase. Detailed information is available from retail outlets. Proof of purchase must be presented to obtain the benefits of the warranty.

We reserve the right to introduce changes.

Used appliances and packaging

If the ⚡ symbol is shown on the specifications plate, bear in mind the following instructions:

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

The packaging of your appliance has been manufactured using only the materials which are strictly necessary to guarantee efficient protection during transport. These materials are 100% recyclable, thus reducing the environmental impact. You can also contribute to caring for the environment by following the advice below:

■ Dispose of the packaging in the appropriate recycling bin.
Before you get rid of an old appliance, make sure you disable it. Contact your local authority to find out the address of your nearest recycling centre to dispose of your appliance.
- Do not pour used oil down the sink. Collect it in a sealed container and take it to an appropriate collection point or, failing that, place it in the rubbish bin (it will end up in a controlled dump; this is probably not the best option, but it will avoid contaminating ground water)

Data of your new appliance

ER32AB70L

Product description:	Single LPG gas hob
Top plate material	Schott Ceran glass
Glass color	Black
Gas Type	LPG
Heat input	6kW
Operating pressure	29mbar

ER326BB70L

Product description:		2 burners LPG gas hob
Top plate material		Schott Ceran glass
Glass color		Black
Gas Type		LPG
Heat input	Front Burner	1.9kW
	Rear Burner	2.8kW
Operating pressure		29mbar

目錄

安全注意事項....13

閣下的新爐具....17

氣爐操作....18

自動開爐....18

安全系統....19

關停爐頭....19

火力等級....19

警告....20

烹飪器皿....21

使用注意事項....22

清潔及保養....23

清潔....23

不適合產品....23

保養....24

毛病....25

技術支援服務部....26

擔保條件....26

用舊的器皿和包裝....26

閣下的新爐具....27

安全注意事項

ER326AB70L

1) 平底鍋支架
2) 控鈕
3) 爐頭(高至1.9千瓦)
4) 爐頭(高至2.8千瓦)
5) 雙環爐頭(高至6千瓦)

控鈕側的圓點顯示哪個爐頭是控鈕所操作的