OHNC 771 X-37 - Tumble drier Otsein-Hoover - Free user manual and instructions
Find the device manual for free OHNC 771 X-37 Otsein-Hoover in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Otsein-Hoover |
| Model | OHNC 771 X-37 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 42 kg |
| Power Supply | 220-240 V, 50 Hz, 2500 W |
| Drying Capacity | 7 kg |
| Energy Class | C |
| Dryer Type | Condenser |
| Number of Drying Programs | 15 |
| Key Functions | Sensor drying, Anti-crease, Start delay, Quick dry |
| Lint Filter | Yes, clean after each cycle |
| Condenser Cleaning | Periodically, indicator light |
| Water Container | Removable, 3.5 L capacity |
| Child Lock | Yes |
| Overheating Protection | Yes |
| Spare Parts Availability | Filter, belt, heating element, drum bearings |
| Repair Support | Authorized service centers, DIY manuals available |
| Noise Level | 65 dB |
Frequently Asked Questions - OHNC 771 X-37 Otsein-Hoover
How do I install the tumble dryer?
Place the dryer on a level floor, leave at least 5 cm clearance on sides and rear. Connect the power cord to a grounded outlet. If vented, ensure proper exhaust; if condenser, ensure drain hose is correctly positioned.
What should I do if the dryer does not start?
Check if the door is fully closed, the power cord is plugged in, the start button is pressed, and the child lock is deactivated. Also verify that the lint filter is not clogged.
How often should I clean the lint filter?
The lint filter should be cleaned after every drying cycle to maintain efficiency and prevent fire hazard. Remove the filter and rinse under water if necessary, then dry thoroughly before reinserting.
Can I dry all types of fabrics?
Most cotton, synthetics, and delicates are suitable. Always check the care label. Do not dry items with foam rubber, fiberglass, or items that have been cleaned with flammable solvents.
Why is my drying cycle taking too long?
This may be due to a clogged lint filter, full water container (for condenser dryers), improper load size, or a blocked condenser. Clean the filter and condenser, and reduce the load if overfilled.
What does the 'Clean Condenser' indicator mean?
This light appears after a certain number of cycles to remind you to clean the condenser unit. Remove the condenser cover, rinse the fins under water, and replace once dry.
How do I use the start delay function?
Select your desired program, then press the Start Delay button repeatedly to set the delay (e.g., 1, 3, 6 hours). Press Start; the dryer will begin operation after the set delay.
Is it normal for my dryer to produce water?
Yes, for condenser dryers, moisture from the clothes is collected in a water container. Empty the container after each cycle. If your dryer is vented, water should exit through the vent.
Can I wash and then dry my clothes in the same machine?
This dryer is a separate appliance. It does not have washing capabilities. Ensure clothes are spun before drying for best results.
Where can I find spare parts?
Spare parts such as filters, belts, and heating elements are available from authorized Otsein-Hoover service centers or online retailers. Use the model number OHNC 771 X-37 to ensure compatibility.
User questions about OHNC 771 X-37 Otsein-Hoover
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual OHNC 771 X-37 - Otsein-Hoover and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OHNC 771 X-37 by Otsein-Hoover.