INT-KLFR-BSB - Keyboard Satel - Free user manual and instructions
Find the device manual for free INT-KLFR-BSB Satel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm System Keypad |
| Brand | Satel |
| Model | INT-KLFR-BSB |
| Display | Backlit LCD, 2 lines x 16 characters |
| Keypad | Membrane keys, 12 keys (0-9, *, #) |
| Programming | Via LCD and on-board menus |
| Audio | Built-in buzzer for key tones and alarms |
| Tamper Protection | Tamper switch against unauthorized opening |
| Communication | RS-485 bus for alarm panel connection |
| Power Supply | 12 V DC, ~50 mA (typical) |
| Dimensions (H x W x D) | 120 x 80 x 25 mm |
| Weight | ~150 g |
| Operating Temperature | -10°C to +55°C |
| Mounting | Wall-mount with screw holes |
| Security Features | Code entry for arming/disarming, panic alarm |
| Languages | English, Polish, and more (configurable) |
| Compatibility | Satel INTEGRA and CA series control panels |
Frequently Asked Questions - INT-KLFR-BSB Satel
How do I program a new user code on the INT-KLFR-BSB?
Enter the installer code (default: 1234), then go to 'Users' menu. Select 'Add User', enter a 4-digit code, and confirm. Refer to the manual for detailed steps.
What should I do if the keypad is not responding?
Check the power supply (12 V DC) and RS-485 connection to the alarm panel. Ensure the address setting DIP switches are correct. Reset the keypad by removing power for 10 seconds.
Can I change the backlight color?
No, the INT-KLFR-BSB has a fixed backlight color (typically blue or white). It is not user-configurable.
How many users can be stored in the keypad?
The keypad itself does not store users; it interfaces with the alarm panel. The number of users depends on the panel model, typically up to 32 or more.
Is the INT-KLFR-BSB weatherproof?
No, it is designed for indoor use only. Do not install in outdoor areas or humid environments.
How do I perform a factory reset?
Press and hold the '*' key while powering up the keypad. Hold until the display shows 'Default'. Release and confirm with '#'.
What is the maximum cable length for RS-485?
The maximum recommended distance is 1200 meters (4000 feet) using twisted-pair cable with proper termination.
Can I connect multiple keypads to one panel?
Yes, up to 8 keypads can be connected in parallel on the RS-485 bus, each with a unique address set via DIP switches.
The display shows 'No Panel Communication'. What does it mean?
The keypad is not receiving data from the alarm panel. Check the bus wiring, panel power, and address settings. Ensure the panel is running.
How do I clean the keypad?
Use a soft, dry cloth. Do not use solvents or water. For stubborn dirt, slightly dampen the cloth with mild soap. Avoid liquid entering the keypad.
User questions about INT-KLFR-BSB Satel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Keyboard in PDF format for free! Find your manual INT-KLFR-BSB - Satel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. INT-KLFR-BSB by Satel.